[Intel-gfx] [PATCH 01/13] drm/i915/mtl: C20 PLL programming
Mika Kahola
mika.kahola at intel.com
Thu Apr 20 12:40:38 UTC 2023
C20 phy PLL programming sequence for DP, DP2.0, HDMI2.x non-FRL and
HDMI2.x FRL. This enables C20 MPLLA and MPLLB programming sequence. add
4 lane support for c20.
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
Signed-off-by: Mika Kahola <mika.kahola at intel.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem at intel.com>
Signed-off-by: Imre Deak <imre.deak at intel.com>
Signed-off-by: Arun R Murthy <arun.r.murthy at intel.com>
---
drivers/gpu/drm/i915/display/intel_cx0_phy.c | 280 +++++++++++++++---
.../gpu/drm/i915/display/intel_cx0_phy_regs.h | 32 ++
drivers/gpu/drm/i915/display/intel_ddi.c | 3 +-
.../drm/i915/display/intel_display_types.h | 15 +-
drivers/gpu/drm/i915/display/intel_dp.c | 12 +-
5 files changed, 300 insertions(+), 42 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
index 83180074b512..dd96bf5e179e 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
@@ -273,6 +273,18 @@ static void intel_cx0_write(struct drm_i915_private *i915, enum port port,
__intel_cx0_write(i915, port, lane, addr, data, committed);
}
+static void intel_c20_sram_write(struct drm_i915_private *i915, enum port port,
+ int lane, u16 addr, u16 data)
+{
+ assert_dc_off(i915);
+
+ intel_cx0_write(i915, port, lane, PHY_C20_WR_ADDRESS_H, addr >> 8, 0);
+ intel_cx0_write(i915, port, lane, PHY_C20_WR_ADDRESS_L, addr & 0xff, 0);
+
+ intel_cx0_write(i915, port, lane, PHY_C20_WR_DATA_H, data >> 8, 0);
+ intel_cx0_write(i915, port, lane, PHY_C20_WR_DATA_L, data & 0xff, 1);
+}
+
static void __intel_cx0_rmw(struct drm_i915_private *i915, enum port port,
int lane, u16 addr, u8 clear, u8 set, bool committed)
{
@@ -1415,6 +1427,207 @@ void intel_c10pll_dump_hw_state(struct drm_i915_private *i915,
i + 2, hw_state->pll[i + 2], i + 3, hw_state->pll[i + 3]);
}
+static bool intel_c20_use_mplla(u32 clock)
+{
+ /* 10G and 20G rates use MPLLA */
+ if (clock == 312500 || clock == 625000)
+ return true;
+
+ return false;
+}
+
+static u8 intel_c20_get_dp_rate(u32 clock)
+{
+ switch (clock) {
+ case 162000: /* 1.62 Gbps DP1.4 */
+ return 0;
+ case 270000: /* 2.7 Gbps DP1.4 */
+ return 1;
+ case 540000: /* 5.4 Gbps DP 1.4 */
+ return 2;
+ case 810000: /* 8.1 Gbps DP1.4 */
+ return 3;
+ case 216000: /* 2.16 Gbps eDP */
+ return 4;
+ case 243000: /* 2.43 Gbps eDP */
+ return 5;
+ case 324000: /* 3.24 Gbps eDP */
+ return 6;
+ case 432000: /* 4.32 Gbps eDP */
+ return 7;
+ case 312500: /* 10 Gbps DP2.0 */
+ return 8;
+ case 421875: /* 13.5 Gbps DP2.0 */
+ return 9;
+ case 625000: /* 20 Gbps DP2.0*/
+ return 10;
+ default:
+ MISSING_CASE(clock);
+ return 0;
+ }
+}
+
+static u8 intel_c20_get_hdmi_rate(u32 clock)
+{
+ switch (clock) {
+ case 25175:
+ case 27000:
+ case 74250:
+ case 148500:
+ case 594000:
+ return 0;
+ case 166670: /* 3 Gbps */
+ case 333330: /* 6 Gbps */
+ case 666670: /* 12 Gbps */
+ return 1;
+ case 444440: /* 8 Gbps */
+ return 2;
+ case 555560: /* 10 Gbps */
+ return 3;
+ default:
+ MISSING_CASE(clock);
+ return 0;
+ }
+}
+
+static bool is_dp2(u32 clock)
+{
+ /* DP2.0 clock rates */
+ if (clock == 312500 || clock == 421875 || clock == 625000)
+ return true;
+
+ return false;
+}
+
+static bool is_hdmi_frl(u32 clock)
+{
+ switch (clock) {
+ case 166670: /* 3 Gbps */
+ case 333330: /* 6 Gbps */
+ case 444440: /* 8 Gbps */
+ case 555560: /* 10 Gbps */
+ case 666670: /* 12 Gbps */
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool intel_c20_protocol_switch_valid(struct intel_encoder *encoder)
+{
+ struct intel_digital_port *intel_dig_port = enc_to_dig_port(encoder);
+
+ /* banks should not be cleared for DPALT/USB4/TBT modes */
+ /* TODO: optimize re-calibration in legacy mode */
+ return intel_tc_port_in_legacy_mode(intel_dig_port);
+}
+
+static void intel_c20_pll_program(struct drm_i915_private *i915,
+ const struct intel_crtc_state *crtc_state,
+ struct intel_encoder *encoder)
+{
+ const struct intel_c20pll_state *pll_state = &crtc_state->cx0pll_state.c20;
+ bool dp = false;
+ int lane = crtc_state->lane_count == 4 ? INTEL_CX0_BOTH_LANES : INTEL_CX0_LANE0;
+ bool cntx;
+ int i;
+
+ if (intel_crtc_has_dp_encoder(crtc_state))
+ dp = true;
+
+ /* 1. Read current context selection */
+ cntx = intel_cx0_read(i915, encoder->port, INTEL_CX0_LANE0, PHY_C20_VDR_CUSTOM_SERDES_RATE) &
+ PHY_C20_CONTEXT_TOGGLE;
+
+ /* 2. If there is a protocol switch from HDMI to DP or vice versa, clear
+ * the lane #0 MPLLB CAL_DONE_BANK DP2.0 10G and 20G rates enable MPLLA.
+ * Protocol switch is only applicable for MPLLA
+ */
+ if (intel_c20_protocol_switch_valid(encoder)) {
+ for (i = 0; i < 4; i++)
+ intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0, RAWLANEAONX_DIG_TX_MPLLB_CAL_DONE_BANK(i), 0);
+ msleep(4);
+ }
+
+ /* 3. Write SRAM configuration context. If A in use, write configuration to B context */
+ /* 3.1 Tx configuration */
+ for (i = 0; i < ARRAY_SIZE(pll_state->tx); i++) {
+ if (cntx)
+ intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0, PHY_C20_A_TX_CNTX_CFG(i), pll_state->tx[i]);
+ else
+ intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0, PHY_C20_B_TX_CNTX_CFG(i), pll_state->tx[i]);
+ }
+
+ /* 3.2 common configuration */
+ for (i = 0; i < ARRAY_SIZE(pll_state->cmn); i++) {
+ if (cntx)
+ intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0, PHY_C20_A_CMN_CNTX_CFG(i), pll_state->cmn[i]);
+ else
+ intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0, PHY_C20_B_CMN_CNTX_CFG(i), pll_state->cmn[i]);
+ }
+
+ /* 3.3 mpllb or mplla configuration */
+ if (intel_c20_use_mplla(pll_state->clock)) {
+ for (i = 0; i < ARRAY_SIZE(pll_state->mplla); i++) {
+ if (cntx)
+ intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0,
+ PHY_C20_A_MPLLA_CNTX_CFG(i),
+ pll_state->mplla[i]);
+ else
+ intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0,
+ PHY_C20_B_MPLLA_CNTX_CFG(i),
+ pll_state->mplla[i]);
+ }
+ } else {
+ for (i = 0; i < ARRAY_SIZE(pll_state->mpllb); i++) {
+ if (cntx)
+ intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0,
+ PHY_C20_A_MPLLB_CNTX_CFG(i),
+ pll_state->mpllb[i]);
+ else
+ intel_c20_sram_write(i915, encoder->port, INTEL_CX0_LANE0,
+ PHY_C20_B_MPLLB_CNTX_CFG(i),
+ pll_state->mpllb[i]);
+ }
+ }
+
+ /* 4. Program custom width to match the link protocol */
+ if (dp) {
+ intel_cx0_write(i915, encoder->port, lane, PHY_C20_VDR_CUSTOM_WIDTH,
+ is_dp2(pll_state->clock) ? 2 : 0,
+ MB_WRITE_COMMITTED);
+ } else if (is_hdmi_frl(pll_state->clock)) {
+ intel_cx0_write(i915, encoder->port, lane, PHY_C20_VDR_CUSTOM_WIDTH,
+ 1, MB_WRITE_COMMITTED);
+ } else
+ intel_cx0_write(i915, encoder->port, INTEL_CX0_BOTH_LANES, PHY_C20_VDR_CUSTOM_WIDTH,
+ 0, MB_WRITE_COMMITTED);
+
+ /* 5. For DP or 6. For HDMI */
+ if (dp) {
+ intel_cx0_rmw(i915, encoder->port, lane, PHY_C20_VDR_CUSTOM_SERDES_RATE,
+ BIT(6) | PHY_C20_CUSTOM_SERDES_MASK,
+ BIT(6) | PHY_C20_CUSTOM_SERDES(intel_c20_get_dp_rate(pll_state->clock)),
+ MB_WRITE_COMMITTED);
+ } else {
+ intel_cx0_rmw(i915, encoder->port, INTEL_CX0_BOTH_LANES, PHY_C20_VDR_CUSTOM_SERDES_RATE,
+ PHY_C20_IS_FRL,
+ is_hdmi_frl(pll_state->clock) ? 1 : 0,
+ MB_WRITE_COMMITTED);
+
+ intel_cx0_write(i915, encoder->port, INTEL_CX0_BOTH_LANES, PHY_C20_VDR_HDMI_RATE,
+ intel_c20_get_hdmi_rate(pll_state->clock),
+ MB_WRITE_COMMITTED);
+ }
+
+ /*
+ * 7. Write Vendor specific registers to toggle context setting to load
+ * the updated programming toggle context bit
+ */
+ intel_cx0_rmw(i915, encoder->port, lane, PHY_C20_VDR_CUSTOM_SERDES_RATE,
+ PHY_C20_CONTEXT_TOGGLE, cntx ? 0 : 1, MB_WRITE_COMMITTED);
+}
+
int intel_c10pll_calc_port_clock(struct intel_encoder *encoder,
const struct intel_c10pll_state *pll_state)
{
@@ -1456,7 +1669,11 @@ static void intel_program_port_clock_ctl(struct intel_encoder *encoder,
val |= XELPDP_LANE1_PHY_CLOCK_SELECT;
val |= XELPDP_FORWARD_CLOCK_UNGATE;
- val |= XELPDP_DDI_CLOCK_SELECT(XELPDP_DDI_CLOCK_SELECT_MAXPCLK);
+
+ if (is_hdmi_frl(crtc_state->port_clock))
+ val |= XELPDP_DDI_CLOCK_SELECT(XELPDP_DDI_CLOCK_SELECT_DIV18CLK);
+ else
+ val |= XELPDP_DDI_CLOCK_SELECT(XELPDP_DDI_CLOCK_SELECT_MAXPCLK);
/* TODO: HDMI FRL */
/* TODO: DP2.0 10G and 20G rates enable MPLLA*/
@@ -1612,7 +1829,7 @@ static void intel_cx0_phy_lane_reset(struct drm_i915_private *i915, enum port po
phy_name(phy), XELPDP_PORT_RESET_END_TIMEOUT);
}
-static void intel_c10_program_phy_lane(struct drm_i915_private *i915,
+static void intel_cx0_program_phy_lane(struct drm_i915_private *i915,
struct intel_encoder *encoder, int lane_count,
bool lane_reversal)
{
@@ -1620,9 +1837,11 @@ static void intel_c10_program_phy_lane(struct drm_i915_private *i915,
bool dp_alt_mode = intel_tc_port_in_dp_alt_mode(enc_to_dig_port(encoder));
enum port port = encoder->port;
- intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1),
- 0, C10_VDR_CTRL_MSGBUS_ACCESS,
- MB_WRITE_COMMITTED);
+ if (intel_is_c10phy(i915, intel_port_to_phy(i915, port)))
+ intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES,
+ PHY_C10_VDR_CONTROL(1), 0,
+ C10_VDR_CTRL_MSGBUS_ACCESS,
+ MB_WRITE_COMMITTED);
/* TODO: DP-alt MFD case where only one PHY lane should be programmed. */
l0t1 = intel_cx0_read(i915, port, INTEL_CX0_LANE0, PHY_CX0_TX_CONTROL(1, 2));
@@ -1685,9 +1904,11 @@ static void intel_c10_program_phy_lane(struct drm_i915_private *i915,
intel_cx0_write(i915, port, INTEL_CX0_LANE1, PHY_CX0_TX_CONTROL(2, 2),
l1t2, MB_WRITE_COMMITTED);
- intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1),
- 0, C10_VDR_CTRL_UPDATE_CFG,
- MB_WRITE_COMMITTED);
+ if (intel_is_c10phy(i915, intel_port_to_phy(i915, port)))
+ intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES,
+ PHY_C10_VDR_CONTROL(1), 0,
+ C10_VDR_CTRL_UPDATE_CFG,
+ MB_WRITE_COMMITTED);
}
static u32 intel_cx0_get_pclk_pll_request(u8 lane_mask)
@@ -1712,8 +1933,8 @@ static u32 intel_cx0_get_pclk_pll_ack(u8 lane_mask)
return val;
}
-static void intel_c10pll_enable(struct intel_encoder *encoder,
- const struct intel_crtc_state *crtc_state)
+void intel_cx0pll_enable(struct intel_encoder *encoder,
+ const struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
enum phy phy = intel_port_to_phy(i915, encoder->port);
@@ -1721,6 +1942,7 @@ static void intel_c10pll_enable(struct intel_encoder *encoder,
bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
u8 maxpclk_lane = lane_reversal ? INTEL_CX0_LANE1 :
INTEL_CX0_LANE0;
+ intel_wakeref_t wakeref = intel_cx0_phy_transaction_begin(encoder);
/*
* 1. Program PORT_CLOCK_CTL REGISTER to configure
@@ -1739,13 +1961,16 @@ static void intel_c10pll_enable(struct intel_encoder *encoder,
CX0_P2_STATE_READY);
/* 4. Program PHY internal PLL internal registers. */
- intel_c10_pll_program(i915, crtc_state, encoder);
+ if (intel_is_c10phy(i915, phy))
+ intel_c10_pll_program(i915, crtc_state, encoder);
+ else
+ intel_c20_pll_program(i915, crtc_state, encoder);
/*
* 5. Program the enabled and disabled owned PHY lane
* transmitters over message bus
*/
- intel_c10_program_phy_lane(i915, encoder, crtc_state->lane_count, lane_reversal);
+ intel_cx0_program_phy_lane(i915, encoder, crtc_state->lane_count, lane_reversal);
/*
* 6. Follow the Display Voltage Frequency Switching - Sequence
@@ -1779,32 +2004,22 @@ static void intel_c10pll_enable(struct intel_encoder *encoder,
* 10. Follow the Display Voltage Frequency Switching Sequence After
* Frequency Change. We handle this step in bxt_set_cdclk().
*/
-}
-
-void intel_cx0pll_enable(struct intel_encoder *encoder,
- const struct intel_crtc_state *crtc_state)
-{
- struct drm_i915_private *i915 = to_i915(encoder->base.dev);
- enum phy phy = intel_port_to_phy(i915, encoder->port);
- intel_wakeref_t wakeref;
-
- wakeref = intel_cx0_phy_transaction_begin(encoder);
-
- drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
- intel_c10pll_enable(encoder, crtc_state);
/* TODO: enable TBT-ALT mode */
intel_cx0_phy_transaction_end(encoder, wakeref);
}
-static void intel_c10pll_disable(struct intel_encoder *encoder)
+void intel_cx0pll_disable(struct intel_encoder *encoder)
{
struct drm_i915_private *i915 = to_i915(encoder->base.dev);
enum phy phy = intel_port_to_phy(i915, encoder->port);
+ bool is_c10 = intel_is_c10phy(i915, phy);
+ intel_wakeref_t wakeref = intel_cx0_phy_transaction_begin(encoder);
/* 1. Change owned PHY lane power to Disable state. */
intel_cx0_powerdown_change_sequence(i915, encoder->port, INTEL_CX0_BOTH_LANES,
- CX0_P2PG_STATE_DISABLE);
+ is_c10 ? CX0_P2PG_STATE_DISABLE :
+ CX0_P4PG_STATE_DISABLE);
/*
* 2. Follow the Display Voltage Frequency Switching Sequence Before
@@ -1842,18 +2057,7 @@ static void intel_c10pll_disable(struct intel_encoder *encoder)
XELPDP_DDI_CLOCK_SELECT_MASK, 0);
intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
XELPDP_FORWARD_CLOCK_UNGATE, 0);
-}
-void intel_cx0pll_disable(struct intel_encoder *encoder)
-{
- struct drm_i915_private *i915 = to_i915(encoder->base.dev);
- enum phy phy = intel_port_to_phy(i915, encoder->port);
- intel_wakeref_t wakeref;
-
- wakeref = intel_cx0_phy_transaction_begin(encoder);
-
- drm_WARN_ON(&i915->drm, !intel_is_c10phy(i915, phy));
- intel_c10pll_disable(encoder);
intel_cx0_phy_transaction_end(encoder, wakeref);
}
diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
index 20024622d0eb..6fcb1680fb54 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
@@ -177,4 +177,36 @@
#define PHY_CX0_TX_CONTROL(tx, control) (0x400 + ((tx) - 1) * 0x200 + (control))
#define CONTROL2_DISABLE_SINGLE_TX REG_BIT(6)
+/* C20 Registers */
+#define PHY_C20_WR_ADDRESS_L 0xC02
+#define PHY_C20_WR_ADDRESS_H 0xC03
+#define PHY_C20_WR_DATA_L 0xC04
+#define PHY_C20_WR_DATA_H 0xC05
+#define PHY_C20_RD_ADDRESS_L 0xC06
+#define PHY_C20_RD_ADDRESS_H 0xC07
+#define PHY_C20_RD_DATA_L 0xC08
+#define PHY_C20_RD_DATA_H 0xC09
+#define PHY_C20_VDR_CUSTOM_SERDES_RATE 0xD00
+#define PHY_C20_IS_FRL REG_BIT8(7)
+#define PHY_C20_VDR_HDMI_RATE 0xD01
+#define PHY_C20_CONTEXT_TOGGLE REG_BIT8(0)
+#define PHY_C20_CUSTOM_SERDES_MASK REG_GENMASK8(4, 1)
+#define PHY_C20_CUSTOM_SERDES(val) REG_FIELD_PREP8(PHY_C20_CUSTOM_SERDES_MASK, val)
+#define PHY_C20_VDR_CUSTOM_WIDTH 0xD02
+#define PHY_C20_A_TX_CNTX_CFG(idx) (0xCF2E - (idx))
+#define PHY_C20_B_TX_CNTX_CFG(idx) (0xCF2A - (idx))
+#define PHY_C20_A_CMN_CNTX_CFG(idx) (0xCDAA - (idx))
+#define PHY_C20_B_CMN_CNTX_CFG(idx) (0xCDA5 - (idx))
+#define PHY_C20_A_MPLLA_CNTX_CFG(idx) (0xCCF0 - (idx))
+#define PHY_C20_B_MPLLA_CNTX_CFG(idx) (0xCCE5 - (idx))
+#define C20_MPLLA_FRACEN REG_BIT(14)
+#define C20_MPLLA_TX_CLK_DIV_MASK REG_GENMASK(10, 8)
+#define PHY_C20_A_MPLLB_CNTX_CFG(idx) (0xCB5A - (idx))
+#define PHY_C20_B_MPLLB_CNTX_CFG(idx) (0xCB4E - (idx))
+#define C20_MPLLB_TX_CLK_DIV_MASK REG_GENMASK(15, 13)
+#define C20_MPLLB_FRACEN REG_BIT(13)
+#define C20_MULTIPLIER_MASK REG_GENMASK(11, 0)
+
+#define RAWLANEAONX_DIG_TX_MPLLB_CAL_DONE_BANK(idx) (0x303D + (idx))
+
#endif /* __INTEL_CX0_REG_DEFS_H__ */
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
index 29e4bfab4635..f445f2613adb 100644
--- a/drivers/gpu/drm/i915/display/intel_ddi.c
+++ b/drivers/gpu/drm/i915/display/intel_ddi.c
@@ -3359,7 +3359,8 @@ void intel_ddi_update_active_dpll(struct intel_atomic_state *state,
struct intel_crtc *slave_crtc;
enum phy phy = intel_port_to_phy(i915, encoder->port);
- if (!intel_phy_is_tc(i915, phy))
+ /* FIXME: Add MTL pll_mgr */
+ if (DISPLAY_VER(i915) >= 14 || !intel_phy_is_tc(i915, phy))
return;
intel_update_active_dpll(state, crtc, encoder);
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index 64b6a5ec4b81..c9927e12b95e 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -996,8 +996,21 @@ struct intel_c10pll_state {
u8 pll[20];
};
+struct intel_c20pll_state {
+ u32 clock; /* in kHz */
+ u16 tx[3];
+ u16 cmn[4];
+ union {
+ u16 mplla[10];
+ u16 mpllb[11];
+ };
+};
+
struct intel_cx0pll_state {
- struct intel_c10pll_state c10;
+ union {
+ struct intel_c10pll_state c10;
+ struct intel_c20pll_state c20;
+ };
bool ssc_enabled;
};
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index 1d28a2560ae0..4361c1ac65c3 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -53,6 +53,7 @@
#include "intel_combo_phy_regs.h"
#include "intel_connector.h"
#include "intel_crtc.h"
+#include "intel_cx0_phy.h"
#include "intel_ddi.h"
#include "intel_de.h"
#include "intel_display_types.h"
@@ -423,7 +424,14 @@ static int ehl_max_source_rate(struct intel_dp *intel_dp)
static int mtl_max_source_rate(struct intel_dp *intel_dp)
{
- return intel_dp_is_edp(intel_dp) ? 675000 : 810000;
+ struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp);
+ struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
+ enum phy phy = intel_port_to_phy(i915, dig_port->base.port);
+
+ if (intel_is_c10phy(i915, phy))
+ return intel_dp_is_edp(intel_dp) ? 675000 : 810000;
+
+ return 2000000;
}
static int vbt_max_link_rate(struct intel_dp *intel_dp)
@@ -452,7 +460,7 @@ intel_dp_set_source_rates(struct intel_dp *intel_dp)
/* The values must be in increasing order */
static const int mtl_rates[] = {
162000, 216000, 243000, 270000, 324000, 432000, 540000, 675000,
- 810000,
+ 810000, 1000000, 1350000, 2000000,
};
static const int icl_rates[] = {
162000, 216000, 270000, 324000, 432000, 540000, 648000, 810000,
--
2.34.1
More information about the Intel-gfx
mailing list