[Intel-gfx] [PATCH 06/13] drm/i915/mtl: For DP2.0 10G and 20G rates use MPLLA

[Radhakrishna Sripada]

On Thu, Apr 20, 2023 at 03:40:43PM +0300, Mika Kahola wrote:
> Use MPLLA for DP2.0 rates 20G and 20G, when ssc is enabled.
> 

Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada at intel.com>

- Radhakrishna(RK) Sripada
> Signed-off-by: Mika Kahola <mika.kahola at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_cx0_phy.c | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> index f7720acaf58c..4231ba98f075 100644
> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> @@ -2340,8 +2340,11 @@ static void intel_program_port_clock_ctl(struct intel_encoder *encoder,
>  		val |= XELPDP_DDI_CLOCK_SELECT(XELPDP_DDI_CLOCK_SELECT_MAXPCLK);
>  
>  	/* TODO: HDMI FRL */
> -	/* TODO: DP2.0 10G and 20G rates enable MPLLA*/
> -	val |= crtc_state->cx0pll_state.ssc_enabled ? XELPDP_SSC_ENABLE_PLLB : 0;
> +	/* DP2.0 10G and 20G rates enable MPLLA*/
> +	if (crtc_state->port_clock == 1000000 || crtc_state->port_clock == 2000000)
> +		val |= crtc_state->cx0pll_state.ssc_enabled ? XELPDP_SSC_ENABLE_PLLA : 0;
> +	else
> +		val |= crtc_state->cx0pll_state.ssc_enabled ? XELPDP_SSC_ENABLE_PLLB : 0;
>  
>  	intel_de_rmw(i915, XELPDP_PORT_CLOCK_CTL(encoder->port),
>  		     XELPDP_LANE1_PHY_CLOCK_SELECT | XELPDP_FORWARD_CLOCK_UNGATE |
> -- 
> 2.34.1
>