[Intel-gfx] [PATCH v3 7/8] drm/i915/mtl: Add support for PM DEMAND
Vinod Govindapillai
vinod.govindapillai at intel.com
Thu Apr 27 15:00:15 UTC 2023
From: Mika Kahola <mika.kahola at intel.com>
Display14 introduces a new way to instruct the PUnit with
power and bandwidth requirements of DE. Add the functionality
to program the registers and handle waits using interrupts.
The current wait time for timeouts is programmed for 10 msecs to
factor in the worst case scenarios. Changes made to use REG_BIT
for a register that we touched(GEN8_DE_MISC_IER _MMIO).
Wa_14016740474 is added which applies to Xe_LPD+ display
v2: checkpatch warning fixes, simplify program pmdemand part
v3: update to dbufs and pipes values to pmdemand register(stan)
Removed the macro usage in update_pmdemand_values()
Bspec: 66451, 64636, 64602, 64603
Cc: Matt Atwood <matthew.s.atwood at intel.com>
Cc: Matt Roper <matthew.d.roper at intel.com>
Cc: Lucas De Marchi <lucas.demarchi at intel.com>
Cc: Gustavo Sousa <gustavo.sousa at intel.com>
Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada at intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa at intel.com>
Signed-off-by: Mika Kahola <mika.kahola at intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai at intel.com>
---
drivers/gpu/drm/i915/Makefile | 3 +-
drivers/gpu/drm/i915/display/intel_display.c | 7 +
.../gpu/drm/i915/display/intel_display_core.h | 6 +
.../drm/i915/display/intel_display_driver.c | 7 +
.../drm/i915/display/intel_display_power.c | 8 +
drivers/gpu/drm/i915/display/intel_pmdemand.c | 455 ++++++++++++++++++
drivers/gpu/drm/i915/display/intel_pmdemand.h | 24 +
drivers/gpu/drm/i915/i915_irq.c | 21 +-
drivers/gpu/drm/i915/i915_reg.h | 36 +-
9 files changed, 562 insertions(+), 5 deletions(-)
create mode 100644 drivers/gpu/drm/i915/display/intel_pmdemand.c
create mode 100644 drivers/gpu/drm/i915/display/intel_pmdemand.h
diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 9af76e376ca9..eb899fa86e51 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -281,7 +281,8 @@ i915-y += \
display/i9xx_wm.o \
display/skl_scaler.o \
display/skl_universal_plane.o \
- display/skl_watermark.o
+ display/skl_watermark.o \
+ display/intel_pmdemand.o
i915-$(CONFIG_ACPI) += \
display/intel_acpi.o \
display/intel_opregion.o
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index bf391a6cd8d6..f98e235fadc6 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -99,6 +99,7 @@
#include "intel_pcode.h"
#include "intel_pipe_crc.h"
#include "intel_plane_initial.h"
+#include "intel_pmdemand.h"
#include "intel_pps.h"
#include "intel_psr.h"
#include "intel_sdvo.h"
@@ -6306,6 +6307,10 @@ int intel_atomic_check(struct drm_device *dev,
return ret;
}
+ ret = intel_pmdemand_atomic_check(state);
+ if (ret)
+ goto fail;
+
ret = intel_atomic_check_crtcs(state);
if (ret)
goto fail;
@@ -6960,6 +6965,7 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
}
intel_sagv_pre_plane_update(state);
+ intel_pmdemand_pre_plane_update(state);
/* Complete the events for pipes that have now been disabled */
for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
@@ -7070,6 +7076,7 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
intel_verify_planes(state);
intel_sagv_post_plane_update(state);
+ intel_pmdemand_post_plane_update(state);
drm_atomic_helper_commit_hw_done(&state->base);
diff --git a/drivers/gpu/drm/i915/display/intel_display_core.h b/drivers/gpu/drm/i915/display/intel_display_core.h
index 9f66d734edf6..9471a052aa57 100644
--- a/drivers/gpu/drm/i915/display/intel_display_core.h
+++ b/drivers/gpu/drm/i915/display/intel_display_core.h
@@ -345,6 +345,12 @@ struct intel_display {
struct intel_global_obj obj;
} dbuf;
+ struct {
+ wait_queue_head_t waitqueue;
+ struct mutex lock;
+ struct intel_global_obj obj;
+ } pmdemand;
+
struct {
/*
* dkl.phy_lock protects against concurrent access of the
diff --git a/drivers/gpu/drm/i915/display/intel_display_driver.c b/drivers/gpu/drm/i915/display/intel_display_driver.c
index 60ce10fc7205..79853d8c3240 100644
--- a/drivers/gpu/drm/i915/display/intel_display_driver.c
+++ b/drivers/gpu/drm/i915/display/intel_display_driver.c
@@ -47,6 +47,7 @@
#include "intel_opregion.h"
#include "intel_overlay.h"
#include "intel_plane_initial.h"
+#include "intel_pmdemand.h"
#include "intel_pps.h"
#include "intel_quirks.h"
#include "intel_vga.h"
@@ -211,6 +212,8 @@ int intel_display_driver_probe_noirq(struct drm_i915_private *i915)
if (ret < 0)
goto cleanup_vga;
+ intel_pmdemand_init(i915);
+
intel_power_domains_init_hw(i915, false);
if (!HAS_DISPLAY(i915))
@@ -240,6 +243,10 @@ int intel_display_driver_probe_noirq(struct drm_i915_private *i915)
if (ret)
goto cleanup_vga_client_pw_domain_dmc;
+ ret = intel_pmdemand_state_init(i915);
+ if (ret)
+ goto cleanup_vga_client_pw_domain_dmc;
+
init_llist_head(&i915->display.atomic_helper.free_list);
INIT_WORK(&i915->display.atomic_helper.free_work,
intel_atomic_helper_free_state_worker);
diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
index 5150069f3f82..f5c5a486efbc 100644
--- a/drivers/gpu/drm/i915/display/intel_display_power.c
+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
@@ -20,6 +20,7 @@
#include "intel_mchbar_regs.h"
#include "intel_pch_refclk.h"
#include "intel_pcode.h"
+#include "intel_pmdemand.h"
#include "intel_pps_regs.h"
#include "intel_snps_phy.h"
#include "skl_watermark.h"
@@ -1085,6 +1086,10 @@ static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
dev_priv->display.dbuf.enabled_slices =
intel_enabled_dbuf_slices_mask(dev_priv);
+ if (DISPLAY_VER(dev_priv) >= 14)
+ intel_program_dbuf_pmdemand(dev_priv, BIT(DBUF_S1) |
+ dev_priv->display.dbuf.enabled_slices);
+
/*
* Just power up at least 1 slice, we will
* figure out later which slices we have and what we need.
@@ -1096,6 +1101,9 @@ static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
{
gen9_dbuf_slices_update(dev_priv, 0);
+
+ if (DISPLAY_VER(dev_priv) >= 14)
+ intel_program_dbuf_pmdemand(dev_priv, 0);
}
static void gen12_dbuf_slices_config(struct drm_i915_private *dev_priv)
diff --git a/drivers/gpu/drm/i915/display/intel_pmdemand.c b/drivers/gpu/drm/i915/display/intel_pmdemand.c
new file mode 100644
index 000000000000..df6429e7059d
--- /dev/null
+++ b/drivers/gpu/drm/i915/display/intel_pmdemand.c
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2024 Intel Corporation
+ */
+
+#include <linux/bitops.h>
+
+#include "i915_drv.h"
+#include "i915_reg.h"
+#include "intel_bw.h"
+#include "intel_cdclk.h"
+#include "intel_cx0_phy.h"
+#include "intel_de.h"
+#include "intel_display.h"
+#include "intel_display_trace.h"
+#include "intel_pmdemand.h"
+#include "skl_watermark.h"
+
+struct intel_pmdemand_state {
+ struct intel_global_state base;
+
+ u16 qclk_gv_bw;
+ u8 voltage_index;
+ u8 qclk_gv_index;
+ u8 active_pipes;
+ u8 dbufs;
+ u8 active_phys_plls_mask;
+ u16 cdclk_freq_mhz;
+ u16 ddiclk_freq_mhz;
+ u8 scalers;
+};
+
+#define to_intel_pmdemand_state(x) container_of((x), struct intel_pmdemand_state, base)
+
+static struct intel_global_state *
+intel_pmdemand_duplicate_state(struct intel_global_obj *obj)
+{
+ struct intel_pmdemand_state *pmdmnd_state;
+
+ pmdmnd_state = kmemdup(obj->state, sizeof(*pmdmnd_state), GFP_KERNEL);
+ if (!pmdmnd_state)
+ return NULL;
+
+ return &pmdmnd_state->base;
+}
+
+static void intel_pmdemand_destroy_state(struct intel_global_obj *obj,
+ struct intel_global_state *state)
+{
+ kfree(state);
+}
+
+static const struct intel_global_state_funcs intel_pmdemand_funcs = {
+ .atomic_duplicate_state = intel_pmdemand_duplicate_state,
+ .atomic_destroy_state = intel_pmdemand_destroy_state,
+};
+
+static struct intel_pmdemand_state *
+intel_atomic_get_pmdemand_state(struct intel_atomic_state *state)
+{
+ struct drm_i915_private *i915 = to_i915(state->base.dev);
+ struct intel_global_state *pmdemand_state;
+
+ pmdemand_state =
+ intel_atomic_get_global_obj_state(state,
+ &i915->display.pmdemand.obj);
+ if (IS_ERR(pmdemand_state))
+ return ERR_CAST(pmdemand_state);
+
+ return to_intel_pmdemand_state(pmdemand_state);
+}
+
+static struct intel_pmdemand_state *
+intel_atomic_get_old_pmdemand_state(struct intel_atomic_state *state)
+{
+ struct drm_i915_private *i915 = to_i915(state->base.dev);
+ struct intel_global_state *pmdemand_state;
+
+ pmdemand_state = intel_atomic_get_old_global_obj_state(state, &i915->display.pmdemand.obj);
+
+ return to_intel_pmdemand_state(pmdemand_state);
+}
+
+static struct intel_pmdemand_state *
+intel_atomic_get_new_pmdemand_state(struct intel_atomic_state *state)
+{
+ struct drm_i915_private *i915 = to_i915(state->base.dev);
+ struct intel_global_state *pmdemand_state;
+
+ pmdemand_state = intel_atomic_get_new_global_obj_state(state, &i915->display.pmdemand.obj);
+
+ return to_intel_pmdemand_state(pmdemand_state);
+}
+
+int intel_pmdemand_state_init(struct drm_i915_private *i915)
+{
+ struct intel_pmdemand_state *pmdemand_state;
+
+ pmdemand_state = kzalloc(sizeof(*pmdemand_state), GFP_KERNEL);
+ if (!pmdemand_state)
+ return -ENOMEM;
+
+ intel_atomic_global_obj_init(i915, &i915->display.pmdemand.obj,
+ &pmdemand_state->base,
+ &intel_pmdemand_funcs);
+
+
+ if (IS_MTL_DISPLAY_STEP(i915, STEP_A0, STEP_C0))
+ /* Wa_14016740474 */
+ intel_de_rmw(i915, XELPD_CHICKEN_DCPR_3, 0, DMD_RSP_TIMEOUT_DISABLE);
+
+ return 0;
+}
+
+void intel_pmdemand_init(struct drm_i915_private *i915)
+{
+ mutex_init(&i915->display.pmdemand.lock);
+ init_waitqueue_head(&i915->display.pmdemand.waitqueue);
+}
+
+static bool pmdemand_needs_update(struct intel_atomic_state *state)
+{
+ bool changed = false;
+ struct intel_crtc *crtc;
+ int i;
+ const struct intel_bw_state *new_bw_state, *old_bw_state;
+ const struct intel_cdclk_state *new_cdclk_state;
+ const struct intel_crtc_state *new_crtc_state, *old_crtc_state;
+ const struct intel_dbuf_state *new_dbuf_state, *old_dbuf_state;
+
+ for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
+ new_crtc_state, i) {
+ new_bw_state = intel_atomic_get_new_bw_state(state);
+ old_bw_state = intel_atomic_get_old_bw_state(state);
+
+ new_dbuf_state = intel_atomic_get_new_dbuf_state(state);
+ old_dbuf_state = intel_atomic_get_old_dbuf_state(state);
+
+ new_cdclk_state = intel_atomic_get_new_cdclk_state(state);
+
+ if ((new_bw_state && new_bw_state->qgv_point_peakbw !=
+ old_bw_state->qgv_point_peakbw) ||
+ (new_dbuf_state && new_dbuf_state->active_pipes !=
+ old_dbuf_state->active_pipes) || new_cdclk_state)
+ changed = true;
+
+ /*
+ * break needs to be removed, if some crtc_state dependent
+ * parameters are added here
+ */
+ break;
+ }
+
+ return changed;
+}
+
+int intel_pmdemand_atomic_check(struct intel_atomic_state *state)
+{
+ struct drm_i915_private *i915 = to_i915(state->base.dev);
+ int port_clock = 0;
+ struct intel_crtc *crtc;
+ struct intel_encoder *encoder;
+ const struct intel_bw_state *new_bw_state;
+ const struct intel_cdclk_state *new_cdclk_state;
+ const struct intel_crtc_state *new_crtc_state, *old_crtc_state;
+ const struct intel_dbuf_state *new_dbuf_state;
+ struct intel_pmdemand_state *new_pmdemand_state;
+ enum phy phy;
+ int i, ret;
+
+ if (DISPLAY_VER(i915) < 14)
+ return 0;
+
+ if (!pmdemand_needs_update(state))
+ return 0;
+
+ new_pmdemand_state = intel_atomic_get_pmdemand_state(state);
+ if (IS_ERR(new_pmdemand_state))
+ return PTR_ERR(new_pmdemand_state);
+
+ ret = intel_atomic_lock_global_state(&new_pmdemand_state->base);
+ if (ret)
+ return ret;
+
+ /* Punit figures out the voltage index based on bandwidth*/
+ new_bw_state = intel_atomic_get_bw_state(state);
+ if (IS_ERR(new_bw_state))
+ return PTR_ERR(new_bw_state);
+
+ /* firmware will calculate the qclck_gc_index, requirement is set to 0 */
+ new_pmdemand_state->qclk_gv_index = 0;
+ new_pmdemand_state->qclk_gv_bw =
+ min_t(u16, new_bw_state->qgv_point_peakbw, 0xffff);
+
+ new_dbuf_state = intel_atomic_get_dbuf_state(state);
+ if (IS_ERR(new_dbuf_state))
+ return PTR_ERR(new_dbuf_state);
+
+ i = hweight8(new_dbuf_state->active_pipes);
+ new_pmdemand_state->active_pipes = min(i, 3);
+
+ new_cdclk_state = intel_atomic_get_cdclk_state(state);
+ if (IS_ERR(new_cdclk_state))
+ return PTR_ERR(new_cdclk_state);
+
+ new_pmdemand_state->voltage_index =
+ new_cdclk_state->logical.voltage_level;
+ /* KHz to MHz */
+ new_pmdemand_state->cdclk_freq_mhz =
+ DIV_ROUND_UP(new_cdclk_state->logical.cdclk, 1000);
+
+ new_pmdemand_state->active_phys_plls_mask = 0;
+
+ for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
+ new_crtc_state, i) {
+ if (!new_crtc_state->hw.active)
+ continue;
+
+ encoder = intel_get_crtc_new_encoder(state, new_crtc_state);
+ if (!encoder)
+ continue;
+
+ phy = intel_port_to_phy(i915, encoder->port);
+
+ if (intel_is_c10phy(i915, phy))
+ new_pmdemand_state->active_phys_plls_mask |= BIT(phy);
+
+ port_clock = max(port_clock, new_crtc_state->port_clock);
+ }
+
+ /* To MHz */
+ new_pmdemand_state->ddiclk_freq_mhz = DIV_ROUND_UP(port_clock, 1000);
+
+ /*
+ * Setting scalers to max as it can not be calculated during flips and
+ * fastsets without taking global states locks.
+ */
+ new_pmdemand_state->scalers = 7;
+
+ ret = intel_atomic_serialize_global_state(&new_pmdemand_state->base);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static bool intel_pmdemand_check_prev_transaction(struct drm_i915_private *i915)
+{
+ return !((intel_de_read(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1)) &
+ XELPDP_PMDEMAND_REQ_ENABLE) ||
+ (intel_de_read(i915, GEN12_DCPR_STATUS_1) &
+ XELPDP_PMDEMAND_INFLIGHT_STATUS));
+}
+
+static bool intel_pmdemand_req_complete(struct drm_i915_private *i915)
+{
+ return !(intel_de_read(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1)) &
+ XELPDP_PMDEMAND_REQ_ENABLE);
+}
+
+static int intel_pmdemand_wait(struct drm_i915_private *i915)
+{
+ DEFINE_WAIT(wait);
+ int ret;
+ const unsigned int timeout_ms = 10;
+
+ ret = wait_event_timeout(i915->display.pmdemand.waitqueue,
+ intel_pmdemand_req_complete(i915),
+ msecs_to_jiffies_timeout(timeout_ms));
+ if (ret == 0)
+ drm_err(&i915->drm,
+ "timed out waiting for Punit PM Demand Response\n");
+
+ return ret;
+}
+
+/* Required to be programmed during Display Init Sequences. */
+void intel_program_dbuf_pmdemand(struct drm_i915_private *i915,
+ u8 dbuf_slices)
+{
+ u32 dbufs = min_t(u32, hweight8(dbuf_slices), 3);
+
+ mutex_lock(&i915->display.pmdemand.lock);
+ if (drm_WARN_ON(&i915->drm,
+ !intel_pmdemand_check_prev_transaction(i915)))
+ goto unlock;
+
+ intel_de_rmw(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(0),
+ XELPDP_PMDEMAND_DBUFS_MASK, XELPDP_PMDEMAND_DBUFS(dbufs));
+ intel_de_rmw(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1), 0,
+ XELPDP_PMDEMAND_REQ_ENABLE);
+
+ intel_pmdemand_wait(i915);
+
+unlock:
+ mutex_unlock(&i915->display.pmdemand.lock);
+}
+
+static void update_pmdemand_values(const struct intel_pmdemand_state *new,
+ const struct intel_pmdemand_state *old,
+ u32 *reg1, u32 *reg2)
+{
+ u32 plls, tmp;
+
+ /*
+ * The pmdemand parameter updates happens in two steps. Pre plane and
+ * post plane updates. During the pre plane, as DE might still be
+ * handling with some old operations, to avoid unwanted performance
+ * issues, program the pmdemand parameters with higher of old and new
+ * values. And then after once settled, use the new parameter values
+ * as part of the post plane update.
+ */
+
+ /* Set 1*/
+ *reg1 &= ~XELPDP_PMDEMAND_QCLK_GV_BW_MASK;
+ tmp = old ? max(old->qclk_gv_bw, new->qclk_gv_bw) : new->qclk_gv_bw;
+ *reg1 |= XELPDP_PMDEMAND_QCLK_GV_BW(tmp);
+
+ *reg1 &= ~XELPDP_PMDEMAND_VOLTAGE_INDEX_MASK;
+ tmp = old ? max(old->voltage_index, new->voltage_index) :
+ new->voltage_index;
+ *reg1 |= XELPDP_PMDEMAND_VOLTAGE_INDEX(tmp);
+
+ *reg1 &= ~XELPDP_PMDEMAND_QCLK_GV_INDEX_MASK;
+ tmp = old ? max(old->qclk_gv_index, new->qclk_gv_index) :
+ new->qclk_gv_index;
+ *reg1 |= XELPDP_PMDEMAND_QCLK_GV_INDEX(tmp);
+
+ *reg1 &= ~XELPDP_PMDEMAND_PIPES_MASK;
+ tmp = old ? max(old->active_pipes, new->active_pipes) :
+ new->active_pipes;
+ *reg1 |= XELPDP_PMDEMAND_PIPES(tmp);
+
+ *reg1 &= ~XELPDP_PMDEMAND_PHYS_MASK;
+ plls = hweight32(new->active_phys_plls_mask);
+ if (old)
+ plls = max(plls, hweight32(old->active_phys_plls_mask));
+ *reg1 |= XELPDP_PMDEMAND_PHYS(plls);
+
+ /* Set 2*/
+ *reg2 &= ~XELPDP_PMDEMAND_CDCLK_FREQ_MASK;
+ tmp = old ? max(old->cdclk_freq_mhz, new->cdclk_freq_mhz) :
+ new->cdclk_freq_mhz;
+ *reg2 |= XELPDP_PMDEMAND_CDCLK_FREQ(tmp);
+
+ *reg2 &= ~XELPDP_PMDEMAND_DDICLK_FREQ_MASK;
+ tmp = old ? max(old->ddiclk_freq_mhz, new->ddiclk_freq_mhz) :
+ new->ddiclk_freq_mhz;
+ *reg2 |= XELPDP_PMDEMAND_DDICLK_FREQ(tmp);
+
+ /* Hard code scalers to 7*/
+ *reg2 &= ~XELPDP_PMDEMAND_SCALERS_MASK;
+ tmp = old ? max(old->scalers, new->scalers) : new->scalers;
+ *reg2 |= XELPDP_PMDEMAND_SCALERS(tmp);
+
+ /*
+ * Active_PLLs starts with 1 because of CDCLK PLL.
+ * TODO: Missing to account genlock filter when it gets used.
+ */
+ *reg2 &= ~XELPDP_PMDEMAND_PLLS_MASK;
+ *reg2 |= XELPDP_PMDEMAND_PLLS(plls + 1);
+}
+
+static void intel_program_pmdemand(struct drm_i915_private *i915,
+ const struct intel_pmdemand_state *new,
+ const struct intel_pmdemand_state *old)
+{
+ bool changed = false;
+ u32 reg1, mod_reg1;
+ u32 reg2, mod_reg2;
+
+ mutex_lock(&i915->display.pmdemand.lock);
+ if (drm_WARN_ON(&i915->drm,
+ !intel_pmdemand_check_prev_transaction(i915)))
+ goto unlock;
+
+ reg1 = intel_de_read(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(0));
+ mod_reg1 = reg1;
+
+ reg2 = intel_de_read(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1));
+ mod_reg2 = reg2;
+
+ update_pmdemand_values(new, old, &mod_reg1, &mod_reg2);
+
+ if (reg1 != mod_reg1) {
+ intel_de_write(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(0),
+ mod_reg1);
+ changed = true;
+ }
+
+ if (reg2 != mod_reg2) {
+ intel_de_write(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1),
+ mod_reg2);
+ changed = true;
+ }
+
+ /* Initiate pm demand request only if register values are changed */
+ if (changed) {
+ drm_dbg_kms(&i915->drm,
+ "initate pmdemand request values: (0x%x 0x%x)\n",
+ mod_reg1, mod_reg2);
+
+ intel_de_rmw(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1), 0,
+ XELPDP_PMDEMAND_REQ_ENABLE);
+
+ intel_pmdemand_wait(i915);
+ }
+
+unlock:
+ mutex_unlock(&i915->display.pmdemand.lock);
+}
+
+static bool
+intel_pmdemand_state_changed(const struct intel_pmdemand_state *new,
+ const struct intel_pmdemand_state *old)
+{
+ return memcmp(&new->qclk_gv_bw, &old->qclk_gv_bw,
+ sizeof(*new) - offsetof(typeof(*new), qclk_gv_bw)) != 0;
+}
+
+void intel_pmdemand_pre_plane_update(struct intel_atomic_state *state)
+{
+ struct drm_i915_private *i915 = to_i915(state->base.dev);
+ const struct intel_pmdemand_state *new_pmdmnd_state =
+ intel_atomic_get_new_pmdemand_state(state);
+ const struct intel_pmdemand_state *old_pmdmnd_state =
+ intel_atomic_get_old_pmdemand_state(state);
+
+ if (DISPLAY_VER(i915) < 14)
+ return;
+
+ if (!new_pmdmnd_state ||
+ !intel_pmdemand_state_changed(new_pmdmnd_state, old_pmdmnd_state))
+ return;
+
+ intel_program_pmdemand(i915, new_pmdmnd_state, old_pmdmnd_state);
+}
+
+void intel_pmdemand_post_plane_update(struct intel_atomic_state *state)
+{
+ struct drm_i915_private *i915 = to_i915(state->base.dev);
+ const struct intel_pmdemand_state *new_pmdmnd_state =
+ intel_atomic_get_new_pmdemand_state(state);
+ const struct intel_pmdemand_state *old_pmdmnd_state =
+ intel_atomic_get_old_pmdemand_state(state);
+
+ if (DISPLAY_VER(i915) < 14)
+ return;
+
+ if (!new_pmdmnd_state ||
+ !intel_pmdemand_state_changed(new_pmdmnd_state, old_pmdmnd_state))
+ return;
+
+ intel_program_pmdemand(i915, new_pmdmnd_state, NULL);
+}
diff --git a/drivers/gpu/drm/i915/display/intel_pmdemand.h b/drivers/gpu/drm/i915/display/intel_pmdemand.h
new file mode 100644
index 000000000000..0114f4e0225a
--- /dev/null
+++ b/drivers/gpu/drm/i915/display/intel_pmdemand.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: MIT */
+/*
+ * Copyright © 2023 Intel Corporation
+ */
+
+#ifndef __INTEL_PMDEMAND_H__
+#define __INTEL_PMDEMAND_H__
+
+#include <linux/types.h>
+
+struct drm_i915_private;
+struct intel_atomic_state;
+struct intel_crtc_state;
+struct intel_plane_state;
+
+void intel_pmdemand_init(struct drm_i915_private *i915);
+int intel_pmdemand_state_init(struct drm_i915_private *i915);
+void intel_program_dbuf_pmdemand(struct drm_i915_private *i915,
+ u8 dbuf_slices);
+void intel_pmdemand_pre_plane_update(struct intel_atomic_state *state);
+void intel_pmdemand_post_plane_update(struct intel_atomic_state *state);
+int intel_pmdemand_atomic_check(struct intel_atomic_state *state);
+
+#endif /* __INTEL_PMDEMAND_H__ */
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 2b94b8ca8ec9..907fa3aee179 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -41,6 +41,7 @@
#include "display/intel_fifo_underrun.h"
#include "display/intel_hotplug.h"
#include "display/intel_lpe_audio.h"
+#include "display/intel_pmdemand.h"
#include "display/intel_psr.h"
#include "display/intel_psr_regs.h"
@@ -1986,12 +1987,25 @@ static u32 gen8_de_pipe_fault_mask(struct drm_i915_private *dev_priv)
return GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
}
+static void intel_pmdemand_irq_handler(struct drm_i915_private *dev_priv)
+{
+ wake_up_all(&dev_priv->display.pmdemand.waitqueue);
+}
+
static void
gen8_de_misc_irq_handler(struct drm_i915_private *dev_priv, u32 iir)
{
bool found = false;
- if (iir & GEN8_DE_MISC_GSE) {
+ if (DISPLAY_VER(dev_priv) >= 14 &&
+ (iir & (XELPDP_PMDEMAND_RSP | XELPDP_PMDEMAND_RSPTOUT_ERR))) {
+ if (iir & XELPDP_PMDEMAND_RSPTOUT_ERR)
+ drm_dbg(&dev_priv->drm,
+ "Error waiting for Punit PM Demand Response\n");
+
+ intel_pmdemand_irq_handler(dev_priv);
+ found = true;
+ } else if (iir & GEN8_DE_MISC_GSE) {
intel_opregion_asle_intr(dev_priv);
found = true;
}
@@ -3742,7 +3756,10 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
de_port_masked |= BXT_DE_PORT_GMBUS;
- if (DISPLAY_VER(dev_priv) >= 11) {
+ if (DISPLAY_VER(dev_priv) >= 14)
+ de_misc_masked |= XELPDP_PMDEMAND_RSPTOUT_ERR |
+ XELPDP_PMDEMAND_RSP;
+ else if (DISPLAY_VER(dev_priv) >= 11) {
enum port port;
if (intel_bios_is_dsi_present(dev_priv, &port))
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index dde6e91055bd..60c007aea1ce 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -4426,8 +4426,10 @@
#define GEN8_DE_MISC_IMR _MMIO(0x44464)
#define GEN8_DE_MISC_IIR _MMIO(0x44468)
#define GEN8_DE_MISC_IER _MMIO(0x4446c)
-#define GEN8_DE_MISC_GSE (1 << 27)
-#define GEN8_DE_EDP_PSR (1 << 19)
+#define XELPDP_PMDEMAND_RSPTOUT_ERR REG_BIT(27)
+#define GEN8_DE_MISC_GSE REG_BIT(27)
+#define GEN8_DE_EDP_PSR REG_BIT(19)
+#define XELPDP_PMDEMAND_RSP REG_BIT(3)
#define GEN8_PCU_ISR _MMIO(0x444e0)
#define GEN8_PCU_IMR _MMIO(0x444e4)
@@ -4512,6 +4514,33 @@
#define XELPDP_DP_ALT_HPD_LONG_DETECT REG_BIT(1)
#define XELPDP_DP_ALT_HPD_SHORT_DETECT REG_BIT(0)
+#define XELPDP_INITIATE_PMDEMAND_REQUEST(dword) _MMIO(0x45230 + 4 * (dword))
+#define XELPDP_PMDEMAND_QCLK_GV_BW_MASK REG_GENMASK(31, 16)
+#define XELPDP_PMDEMAND_QCLK_GV_BW(x) REG_FIELD_PREP(XELPDP_PMDEMAND_QCLK_GV_BW_MASK, x)
+#define XELPDP_PMDEMAND_VOLTAGE_INDEX_MASK REG_GENMASK(14, 12)
+#define XELPDP_PMDEMAND_VOLTAGE_INDEX(x) REG_FIELD_PREP(XELPDP_PMDEMAND_VOLTAGE_INDEX_MASK, x)
+#define XELPDP_PMDEMAND_QCLK_GV_INDEX_MASK REG_GENMASK(11, 8)
+#define XELPDP_PMDEMAND_QCLK_GV_INDEX(x) REG_FIELD_PREP(XELPDP_PMDEMAND_QCLK_GV_INDEX_MASK, x)
+#define XELPDP_PMDEMAND_PIPES_MASK REG_GENMASK(7, 6)
+#define XELPDP_PMDEMAND_PIPES(x) REG_FIELD_PREP(XELPDP_PMDEMAND_PIPES_MASK, x)
+#define XELPDP_PMDEMAND_DBUFS_MASK REG_GENMASK(5, 4)
+#define XELPDP_PMDEMAND_DBUFS(x) REG_FIELD_PREP(XELPDP_PMDEMAND_DBUFS_MASK, x)
+#define XELPDP_PMDEMAND_PHYS_MASK REG_GENMASK(2, 0)
+#define XELPDP_PMDEMAND_PHYS(x) REG_FIELD_PREP(XELPDP_PMDEMAND_PHYS_MASK, x)
+
+#define XELPDP_PMDEMAND_REQ_ENABLE REG_BIT(31)
+#define XELPDP_PMDEMAND_CDCLK_FREQ_MASK REG_GENMASK(30, 20)
+#define XELPDP_PMDEMAND_CDCLK_FREQ(x) REG_FIELD_PREP(XELPDP_PMDEMAND_CDCLK_FREQ_MASK, x)
+#define XELPDP_PMDEMAND_DDICLK_FREQ_MASK REG_GENMASK(18, 8)
+#define XELPDP_PMDEMAND_DDICLK_FREQ(x) REG_FIELD_PREP(XELPDP_PMDEMAND_DDICLK_FREQ_MASK, x)
+#define XELPDP_PMDEMAND_SCALERS_MASK REG_GENMASK(6, 4)
+#define XELPDP_PMDEMAND_SCALERS(x) REG_FIELD_PREP(XELPDP_PMDEMAND_SCALERS_MASK, x)
+#define XELPDP_PMDEMAND_PLLS_MASK REG_GENMASK(2, 0)
+#define XELPDP_PMDEMAND_PLLS(x) REG_FIELD_PREP(XELPDP_PMDEMAND_PLLS_MASK, x)
+
+#define GEN12_DCPR_STATUS_1 _MMIO(0x46440)
+#define XELPDP_PMDEMAND_INFLIGHT_STATUS REG_BIT(26)
+
#define ILK_DISPLAY_CHICKEN2 _MMIO(0x42004)
/* Required on all Ironlake and Sandybridge according to the B-Spec. */
#define ILK_ELPIN_409_SELECT REG_BIT(25)
@@ -4671,6 +4700,9 @@
#define DCPR_SEND_RESP_IMM REG_BIT(25)
#define DCPR_CLEAR_MEMSTAT_DIS REG_BIT(24)
+#define XELPD_CHICKEN_DCPR_3 _MMIO(0x46438)
+#define DMD_RSP_TIMEOUT_DISABLE REG_BIT(19)
+
#define SKL_DFSM _MMIO(0x51000)
#define SKL_DFSM_DISPLAY_PM_DISABLE (1 << 27)
#define SKL_DFSM_DISPLAY_HDCP_DISABLE (1 << 25)
--
2.34.1
More information about the Intel-gfx
mailing list