[Intel-gfx] [PATCH 05/11] drm/i915: Add support for disabling any CRTCs during HW readout/sanitization
Imre Deak
imre.deak at intel.com
Fri Apr 28 17:47:23 UTC 2023
On Fri, Apr 28, 2023 at 08:22:54PM +0300, Imre Deak wrote:
> On Fri, Apr 28, 2023 at 05:02:35PM +0300, Ville Syrjälä wrote:
> > On Wed, Apr 26, 2023 at 07:52:59PM +0300, Imre Deak wrote:
> > > During HW readout/sanitization CRTCs can be disabled only if they don't
> > > have an attached encoder (and so the encoder disable hooks don't need to
> > > be called). An upcoming patch will need to disable CRTCs also with an
> > > attached an encoder, so add support for this.
> > >
> > > For bigjoiner configs the encoder disabling hooks require the slave CRTC
> > > states, so add these too to the atomic state. Since the connector atomic
> > > state is already up-to-date when the CRTC is disabled the connector
> > > state needs to be updated (reset) after the CRTC is disabled, make this
> > > so. Follow the proper order of disabling first all bigjoiner slaves,
> > > then any port synced CRTC slaves followed by the CRTC originally
> > > requested to be disabled.
> > >
> > > Signed-off-by: Imre Deak <imre.deak at intel.com>
> > > ---
> > > .../drm/i915/display/intel_modeset_setup.c | 124 ++++++++++++++++--
> > > 1 file changed, 115 insertions(+), 9 deletions(-)
> > >
> > > diff --git a/drivers/gpu/drm/i915/display/intel_modeset_setup.c b/drivers/gpu/drm/i915/display/intel_modeset_setup.c
> > > index a66085cf82bab..f613c074187a2 100644
> > > --- a/drivers/gpu/drm/i915/display/intel_modeset_setup.c
> > > +++ b/drivers/gpu/drm/i915/display/intel_modeset_setup.c
> > > @@ -50,10 +50,39 @@ static void set_encoder_for_connector(struct intel_connector *connector,
> > > }
> > > }
> > >
> > > +static void reset_encoder_connector_state(struct intel_encoder *encoder)
> > > +{
> > > + struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> > > + struct intel_connector *connector;
> > > + struct drm_connector_list_iter conn_iter;
> > > +
> > > + drm_connector_list_iter_begin(&i915->drm, &conn_iter);
> > > + for_each_intel_connector_iter(connector, &conn_iter) {
> > > + if (connector->base.encoder != &encoder->base)
> > > + continue;
> > > +
> > > + set_encoder_for_connector(connector, NULL);
> > > +
> > > + connector->base.dpms = DRM_MODE_DPMS_OFF;
> > > + connector->base.encoder = NULL;
> > > + }
> > > + drm_connector_list_iter_end(&conn_iter);
> > > +}
> > > +
> > > +static void reset_crtc_encoder_state(struct intel_crtc *crtc)
> > > +{
> > > + struct drm_i915_private *i915 = to_i915(crtc->base.dev);
> > > + struct intel_encoder *encoder;
> > > +
> > > + for_each_encoder_on_crtc(&i915->drm, &crtc->base, encoder) {
> > > + reset_encoder_connector_state(encoder);
> > > + encoder->base.crtc = NULL;
> > > + }
> > > +}
> > > +
> > > static void intel_crtc_disable_noatomic(struct intel_crtc *crtc,
> > > struct drm_modeset_acquire_ctx *ctx)
> > > {
> > > - struct intel_encoder *encoder;
> > > struct drm_i915_private *i915 = to_i915(crtc->base.dev);
> > > struct intel_bw_state *bw_state =
> > > to_intel_bw_state(i915->display.bw.obj.state);
> > > @@ -65,9 +94,8 @@ static void intel_crtc_disable_noatomic(struct intel_crtc *crtc,
> > > to_intel_crtc_state(crtc->base.state);
> > > struct intel_plane *plane;
> > > struct drm_atomic_state *state;
> > > - struct intel_crtc_state *temp_crtc_state;
> > > + struct intel_crtc *temp_crtc;
> > > enum pipe pipe = crtc->pipe;
> > > - int ret;
> > >
> > > if (!crtc_state->hw.active)
> > > return;
> > > @@ -92,10 +120,17 @@ static void intel_crtc_disable_noatomic(struct intel_crtc *crtc,
> > > to_intel_atomic_state(state)->internal = true;
> > >
> > > /* Everything's already locked, -EDEADLK can't happen. */
> > > - temp_crtc_state = intel_atomic_get_crtc_state(state, crtc);
> > > - ret = drm_atomic_add_affected_connectors(state, &crtc->base);
> > > + for_each_intel_crtc_in_pipe_mask(&i915->drm, temp_crtc,
> > > + BIT(pipe) |
> > > + intel_crtc_bigjoiner_slave_pipes(crtc_state)) {
> > > + struct intel_crtc_state *temp_crtc_state =
> > > + intel_atomic_get_crtc_state(state, temp_crtc);
> > > + int ret;
> > >
> > > - drm_WARN_ON(&i915->drm, IS_ERR(temp_crtc_state) || ret);
> > > + ret = drm_atomic_add_affected_connectors(state, &temp_crtc->base);
> > > +
> > > + drm_WARN_ON(&i915->drm, IS_ERR(temp_crtc_state) || ret);
> > > + }
> >
> > It's a bit weird to have this loop inside the function that
> > otherwise seems to be called individually for each of the
> > joined pipes. Why do we need this?
>
> If this is called for the master pipe, calling its encoders, it will go
> through the slave pipes using their CRTC states, at least in
> intel_ddi_post_disable().
>
> > > i915->display.funcs.display->crtc_disable(to_intel_atomic_state(state), crtc);
> > >
> > > @@ -120,8 +155,7 @@ static void intel_crtc_disable_noatomic(struct intel_crtc *crtc,
> > > drm_WARN_ON(&i915->drm,
> > > drm_atomic_set_mode_for_crtc(&crtc_state->uapi, NULL) < 0);
> > >
> > > - for_each_encoder_on_crtc(&i915->drm, &crtc->base, encoder)
> > > - encoder->base.crtc = NULL;
> > > + reset_crtc_encoder_state(crtc);
> > >
> > > intel_fbc_disable(crtc);
> > > intel_update_watermarks(i915);
> > > @@ -272,6 +306,77 @@ static void intel_sanitize_fifo_underrun_reporting(const struct intel_crtc_state
> > > !HAS_GMCH(i915));
> > > }
> > >
> > > +static u32 get_transcoder_pipes(struct drm_i915_private *i915, u32 transcoder_mask)
> > > +{
> > > + struct intel_crtc *slave_crtc;
> > > + u32 pipes = 0;
> > > +
> > > + for_each_intel_crtc(&i915->drm, slave_crtc) {
> > > + struct intel_crtc_state *slave_crtc_state =
> > > + to_intel_crtc_state(slave_crtc->base.state);
> > > +
> > > + if (slave_crtc_state->cpu_transcoder == INVALID_TRANSCODER)
> > > + continue;
> > > +
> > > + if (transcoder_mask & BIT(slave_crtc_state->cpu_transcoder))
> > > + pipes |= BIT(slave_crtc->pipe);
> > > + }
> > > +
> > > + return pipes;
> > > +}
> > > +
> > > +static u32 get_bigjoiner_slave_pipes(struct drm_i915_private *i915, u32 master_pipes)
> > > +{
> > > + struct intel_crtc *master_crtc;
> > > + u32 pipes = 0;
> > > +
> > > + for_each_intel_crtc_in_pipe_mask(&i915->drm, master_crtc, master_pipes) {
> > > + struct intel_crtc_state *master_crtc_state =
> > > + to_intel_crtc_state(master_crtc->base.state);
> > > +
> > > + pipes |= intel_crtc_bigjoiner_slave_pipes(master_crtc_state);
> > > + }
> > > +
> > > + return pipes;
> > > +}
> > > +
> > > +static void kill_bigjoiner_slave_noatomic(struct intel_crtc *master_crtc)
> > > +{
> > > + struct drm_i915_private *i915 = to_i915(master_crtc->base.dev);
> > > + struct intel_crtc_state *master_crtc_state =
> > > + to_intel_crtc_state(master_crtc->base.state);
> > > + struct intel_crtc *slave_crtc;
> > > +
> > > + for_each_intel_crtc_in_pipe_mask(&i915->drm, slave_crtc,
> > > + intel_crtc_bigjoiner_slave_pipes(master_crtc_state)) {
> > > + struct intel_crtc_state *slave_crtc_state =
> > > + to_intel_crtc_state(slave_crtc->base.state);
> > > +
> > > + slave_crtc_state->bigjoiner_pipes = 0;
> > > + }
> > > +
> > > + master_crtc_state->bigjoiner_pipes = 0;
> > > +}
> > > +
> > > +static void disable_crtc_with_slaves(struct intel_crtc *crtc,
> > > + struct drm_modeset_acquire_ctx *ctx)
> > > +{
> > > + struct drm_i915_private *i915 = to_i915(crtc->base.dev);
> > > + struct intel_crtc_state *crtc_state = to_intel_crtc_state(crtc->base.state);
> > > + u32 bigjoiner_masters = BIT(crtc->pipe) |
> > > + get_transcoder_pipes(i915, crtc_state->sync_mode_slaves_mask);
> >
> > The resulting bitmask would seem to also include the bigjoiner slaves.
>
> Hrm, doesn't sync_mode_slaves_mask contain only the transcoder bits for
> the port-synced master CRTCs? I assumed that those port-synced master
> CRTCs would point to their slave pipes via their
> crtc_state->bigjoiner_pipes mask.
Ah, understood the issue, the port_synced slave CRTCs need to get
disabled before the port_sync master.
So I think the following gives the correct order:
u32 portsync_slaves = get_transcoder_pipes(i915,
crtc_state->sync_mode_slaves_mask);
u32 bigjoiner_slaves = get_bigjoiner_slave_pipes(i915,
BIT(crtc->pipe) |
portsync_slaves);
for_each_intel_crtc_in_pipe_mask(&i915->drm, temp_crtc, bigjoiner_slaves)
intel_crtc_disable_noatomic(temp_crtc, ctx);
for_each_intel_crtc_in_pipe_mask(&i915->drm, temp_crtc, portsync_slaves) {
intel_crtc_disable_noatomic(temp_crtc, ctx);
kill_bigjoiner_slave_noatomic(temp_crtc);
}
intel_crtc_disable_noatomic(crtc);
kill_bigjoiner_slave_noatomic(crtc);
?
> > > + u32 bigjoiner_slaves = get_bigjoiner_slave_pipes(i915, bigjoiner_masters);
> > > + struct intel_crtc *temp_crtc;
> > > +
> > > + for_each_intel_crtc_in_pipe_mask(&i915->drm, temp_crtc, bigjoiner_slaves)
> > > + intel_crtc_disable_noatomic(temp_crtc, ctx);
> > > +
> > > + for_each_intel_crtc_in_pipe_mask(&i915->drm, temp_crtc, bigjoiner_masters) {
> > > + intel_crtc_disable_noatomic(temp_crtc, ctx);
> > > + kill_bigjoiner_slave_noatomic(temp_crtc);
> > > + }
> > > +}
> > > +
> > > static void intel_sanitize_crtc(struct intel_crtc *crtc,
> > > struct drm_modeset_acquire_ctx *ctx)
> > > {
> > > @@ -299,10 +404,11 @@ static void intel_sanitize_crtc(struct intel_crtc *crtc,
> > > /*
> > > * Adjust the state of the output pipe according to whether we have
> > > * active connectors/encoders.
> > > + * TODO: Add support for MST
> > > */
> > > if (crtc_state->hw.active && !intel_crtc_has_encoders(crtc) &&
> > > !intel_crtc_is_bigjoiner_slave(crtc_state))
> > > - intel_crtc_disable_noatomic(crtc, ctx);
> > > + disable_crtc_with_slaves(crtc, ctx);
> >
> > I'd like to keep the _noatomic() in the name.
>
> Ok, will change this.
>
> >
> > > }
> > >
> > > static bool has_bogus_dpll_config(const struct intel_crtc_state *crtc_state)
> > > --
> > > 2.37.2
> >
> > --
> > Ville Syrjälä
> > Intel
More information about the Intel-gfx
mailing list