[Intel-gfx] [PATCH v2 3/4] drm/i915/cx0: Enable/disable TX only for owned PHY lanes

[Gustavo Sousa]

Display must not enable or disable transmitters for not-owned PHY lanes.

BSpec: 64539
Reviewed-by: Mika Kahola <mika.kahola at intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa at intel.com>
---
 drivers/gpu/drm/i915/display/intel_cx0_phy.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
index 2b112ed78943..93d3a63fe89a 100644
--- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
@@ -2607,10 +2607,11 @@ static void intel_cx0_program_phy_lane(struct drm_i915_private *i915,
 	int i;
 	u8 disables;
 	bool dp_alt_mode = intel_tc_port_in_dp_alt_mode(enc_to_dig_port(encoder));
+	u8 owned_lane_mask = intel_cx0_get_owned_lane_mask(i915, encoder);
 	enum port port = encoder->port;
 
 	if (intel_is_c10phy(i915, intel_port_to_phy(i915, port)))
-		intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES,
+		intel_cx0_rmw(i915, port, owned_lane_mask,
 			      PHY_C10_VDR_CONTROL(1), 0,
 			      C10_VDR_CTRL_MSGBUS_ACCESS,
 			      MB_WRITE_COMMITTED);
@@ -2625,11 +2626,13 @@ static void intel_cx0_program_phy_lane(struct drm_i915_private *i915,
 		disables |= REG_FIELD_PREP8(REG_GENMASK8(1, 0), 0x1);
 	}
 
-	/* TODO: DP-alt MFD case where only one PHY lane should be programmed. */
 	for (i = 0; i < 4; i++) {
 		int tx = i % 2 + 1;
 		u8 lane_mask = i < 2 ? INTEL_CX0_LANE0 : INTEL_CX0_LANE1;
 
+		if (!(owned_lane_mask & lane_mask))
+			continue;
+
 		intel_cx0_rmw(i915, port, lane_mask, PHY_CX0_TX_CONTROL(tx, 2),
 			      CONTROL2_DISABLE_SINGLE_TX,
 			      disables & BIT(i) ? CONTROL2_DISABLE_SINGLE_TX : 0,
@@ -2637,7 +2640,7 @@ static void intel_cx0_program_phy_lane(struct drm_i915_private *i915,
 	}
 
 	if (intel_is_c10phy(i915, intel_port_to_phy(i915, port)))
-		intel_cx0_rmw(i915, port, INTEL_CX0_BOTH_LANES,
+		intel_cx0_rmw(i915, port, owned_lane_mask,
 			      PHY_C10_VDR_CONTROL(1), 0,
 			      C10_VDR_CTRL_UPDATE_CFG,
 			      MB_WRITE_COMMITTED);
-- 
2.41.0