[Intel-gfx] [Intel-xe] [PATCH 18/42] drm/i915/xe2lpd: Move registers to PICA
Lucas De Marchi
lucas.demarchi at intel.com
Thu Aug 24 10:34:25 UTC 2023
On Thu, Aug 24, 2023 at 11:34:59AM +0300, Jani Nikula wrote:
>On Wed, 23 Aug 2023, Lucas De Marchi <lucas.demarchi at intel.com> wrote:
>> diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
>> index cb5d1be2ba19..4b5b9a97142d 100644
>> --- a/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
>> +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy_regs.h
>> @@ -6,13 +6,15 @@
>> #ifndef __INTEL_CX0_PHY_REGS_H__
>> #define __INTEL_CX0_PHY_REGS_H__
>>
>> +#include "i915_drv.h"
>
>Please don't do this. Please don't add inline functions that depend on
>i915_drv.h etc. being included from headers. This simple headers just
>changed to including like half the headers in the entire driver. It's
>that bad.
>
>I think the main question is why does anything other than
>intel_cx0_phy_regs.c need the helpers? It's probably the division
>between that and intel_ddi.c that's wrong in the first place.
because on platform N-1 the register was on DDI and on platform N it
moved to the phy. So how would the divide be?
Lucas De Marchi
>
>That's actually been one of the benefits of splitting the register
>macros by area; you can tell what registers are used where, and
>sometimes it gives bad code smells about stuff being accessed in the
>wrong place.
>
>BR,
>Jani.
>
>
>> #include "i915_reg_defs.h"
>> +#include "intel_display_limits.h"
>>
>> #define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_A 0x64040
>> #define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_B 0x64140
>> #define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC1 0x16F240
>> #define _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC2 0x16F440
>> -#define XELPDP_PORT_M2P_MSGBUS_CTL(port, lane) _MMIO(_PICK_EVEN_2RANGES(port, PORT_TC1, \
>> +#define XELPDP_PORT_M2P_MSGBUS_CTL(idx, lane) _MMIO(_PICK_EVEN_2RANGES(idx, PORT_TC1, \
>> _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_A, \
>> _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_B, \
>> _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC1, \
>> @@ -27,7 +29,7 @@
>> #define XELPDP_PORT_M2P_TRANSACTION_RESET REG_BIT(15)
>> #define XELPDP_PORT_M2P_ADDRESS_MASK REG_GENMASK(11, 0)
>> #define XELPDP_PORT_M2P_ADDRESS(val) REG_FIELD_PREP(XELPDP_PORT_M2P_ADDRESS_MASK, val)
>> -#define XELPDP_PORT_P2M_MSGBUS_STATUS(port, lane) _MMIO(_PICK_EVEN_2RANGES(port, PORT_TC1, \
>> +#define XELPDP_PORT_P2M_MSGBUS_STATUS(idx, lane) _MMIO(_PICK_EVEN_2RANGES(idx, PORT_TC1, \
>> _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_A, \
>> _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_B, \
>> _XELPDP_PORT_M2P_MSGBUS_CTL_LN0_USBC1, \
>> @@ -54,7 +56,7 @@
>> #define _XELPDP_PORT_BUF_CTL1_LN0_B 0x64104
>> #define _XELPDP_PORT_BUF_CTL1_LN0_USBC1 0x16F200
>> #define _XELPDP_PORT_BUF_CTL1_LN0_USBC2 0x16F400
>> -#define XELPDP_PORT_BUF_CTL1(port) _MMIO(_PICK_EVEN_2RANGES(port, PORT_TC1, \
>> +#define XELPDP_PORT_BUF_CTL1(idx) _MMIO(_PICK_EVEN_2RANGES(idx, PORT_TC1, \
>> _XELPDP_PORT_BUF_CTL1_LN0_A, \
>> _XELPDP_PORT_BUF_CTL1_LN0_B, \
>> _XELPDP_PORT_BUF_CTL1_LN0_USBC1, \
>> @@ -75,7 +77,7 @@
>> #define XELPDP_PORT_WIDTH_MASK REG_GENMASK(3, 1)
>> #define XELPDP_PORT_WIDTH(val) REG_FIELD_PREP(XELPDP_PORT_WIDTH_MASK, val)
>>
>> -#define XELPDP_PORT_BUF_CTL2(port) _MMIO(_PICK_EVEN_2RANGES(port, PORT_TC1, \
>> +#define XELPDP_PORT_BUF_CTL2(idx) _MMIO(_PICK_EVEN_2RANGES(idx, PORT_TC1, \
>> _XELPDP_PORT_BUF_CTL1_LN0_A, \
>> _XELPDP_PORT_BUF_CTL1_LN0_B, \
>> _XELPDP_PORT_BUF_CTL1_LN0_USBC1, \
>> @@ -95,7 +97,7 @@
>> #define XELPDP_POWER_STATE_READY_MASK REG_GENMASK(7, 4)
>> #define XELPDP_POWER_STATE_READY(val) REG_FIELD_PREP(XELPDP_POWER_STATE_READY_MASK, val)
>>
>> -#define XELPDP_PORT_BUF_CTL3(port) _MMIO(_PICK_EVEN_2RANGES(port, PORT_TC1, \
>> +#define XELPDP_PORT_BUF_CTL3(idx) _MMIO(_PICK_EVEN_2RANGES(idx, PORT_TC1, \
>> _XELPDP_PORT_BUF_CTL1_LN0_A, \
>> _XELPDP_PORT_BUF_CTL1_LN0_B, \
>> _XELPDP_PORT_BUF_CTL1_LN0_USBC1, \
>> @@ -114,7 +116,7 @@
>> #define _XELPDP_PORT_CLOCK_CTL_B 0x641E0
>> #define _XELPDP_PORT_CLOCK_CTL_USBC1 0x16F260
>> #define _XELPDP_PORT_CLOCK_CTL_USBC2 0x16F460
>> -#define XELPDP_PORT_CLOCK_CTL(port) _MMIO(_PICK_EVEN_2RANGES(port, PORT_TC1, \
>> +#define XELPDP_PORT_CLOCK_CTL(idx) _MMIO(_PICK_EVEN_2RANGES(idx, PORT_TC1, \
>> _XELPDP_PORT_CLOCK_CTL_A, \
>> _XELPDP_PORT_CLOCK_CTL_B, \
>> _XELPDP_PORT_CLOCK_CTL_USBC1, \
>> @@ -271,4 +273,61 @@
>> #define HDMI_DIV_MASK REG_GENMASK16(2, 0)
>> #define HDMI_DIV(val) REG_FIELD_PREP16(HDMI_DIV_MASK, val)
>>
>> +/*
>> + * All registers are in the same IP, with a single range. However the registers
>> + * for TC_PORT come first.
>> + */
>> +static inline enum port xe2lpd_port_idx(enum port port)
>> +{
>> + return port >= PORT_TC1 ? port : PORT_TC4 + 1 + port - PORT_A;
>> +}
>> +
>> +static inline i915_reg_t xelpdp_port_clock_ctl_reg(struct drm_i915_private *i915,
>> + enum port port)
>> +{
>> + return DISPLAY_VER(i915) >= 20 ?
>> + XELPDP_PORT_CLOCK_CTL(xe2lpd_port_idx(port)) :
>> + XELPDP_PORT_CLOCK_CTL(port);
>> +}
>> +
>> +static inline i915_reg_t xelpdp_port_buf_ctl3_reg(struct drm_i915_private *i915,
>> + enum port port)
>> +{
>> + return DISPLAY_VER(i915) >= 20 ?
>> + XELPDP_PORT_BUF_CTL3(xe2lpd_port_idx(port)) :
>> + XELPDP_PORT_BUF_CTL3(port);
>> +}
>> +
>> +static inline i915_reg_t xelpdp_port_buf_ctl2_reg(struct drm_i915_private *i915,
>> + enum port port)
>> +{
>> + return DISPLAY_VER(i915) >= 20 ?
>> + XELPDP_PORT_BUF_CTL2(xe2lpd_port_idx(port)) :
>> + XELPDP_PORT_BUF_CTL2(port);
>> +}
>> +
>> +static inline i915_reg_t xelpdp_port_buf_ctl1_reg(struct drm_i915_private *i915,
>> + enum port port)
>> +{
>> + return DISPLAY_VER(i915) >= 20 ?
>> + XELPDP_PORT_BUF_CTL1(xe2lpd_port_idx(port)) :
>> + XELPDP_PORT_BUF_CTL1(port);
>> +}
>> +
>> +static inline i915_reg_t xelpdp_port_m2p_msgbus_ctl_reg(struct drm_i915_private *i915,
>> + enum port port, int lane)
>> +{
>> + return DISPLAY_VER(i915) >= 20 ?
>> + XELPDP_PORT_M2P_MSGBUS_CTL(xe2lpd_port_idx(port), lane) :
>> + XELPDP_PORT_M2P_MSGBUS_CTL(port, lane);
>> +}
>> +
>> +static inline i915_reg_t xelpdp_port_p2m_msgbus_status_reg(struct drm_i915_private *i915,
>> + enum port port, int lane)
>> +{
>> + return DISPLAY_VER(i915) >= 20 ?
>> + XELPDP_PORT_P2M_MSGBUS_STATUS(xe2lpd_port_idx(port), lane) :
>> + XELPDP_PORT_P2M_MSGBUS_STATUS(port, lane);
>> +}
>> +
>> #endif /* __INTEL_CX0_REG_DEFS_H__ */
>> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
>> index 3147ed174d83..3587ddc6d8ed 100644
>> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
>> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
>> @@ -176,7 +176,7 @@ static void mtl_wait_ddi_buf_idle(struct drm_i915_private *i915, enum port port)
>> int ret;
>>
>> /* FIXME: find out why Bspec's 100us timeout is too short */
>> - ret = wait_for_us((intel_de_read(i915, XELPDP_PORT_BUF_CTL1(port)) &
>> + ret = wait_for_us((intel_de_read(i915, xelpdp_port_buf_ctl1_reg(i915, port)) &
>> XELPDP_PORT_BUF_PHY_IDLE), 10000);
>> if (ret)
>> drm_err(&i915->drm, "Timeout waiting for DDI BUF %c to get idle\n",
>> @@ -224,7 +224,9 @@ static void intel_wait_ddi_buf_active(struct drm_i915_private *dev_priv,
>> }
>>
>> if (DISPLAY_VER(dev_priv) >= 14)
>> - ret = _wait_for(!(intel_de_read(dev_priv, XELPDP_PORT_BUF_CTL1(port)) & XELPDP_PORT_BUF_PHY_IDLE),
>> + ret = _wait_for(!(intel_de_read(dev_priv,
>> + xelpdp_port_buf_ctl1_reg(dev_priv, port)) &
>> + XELPDP_PORT_BUF_PHY_IDLE),
>> timeout_us, 10, 10);
>> else
>> ret = _wait_for(!(intel_de_read(dev_priv, DDI_BUF_CTL(port)) & DDI_BUF_IS_IDLE),
>> @@ -2365,7 +2367,7 @@ mtl_ddi_enable_d2d(struct intel_encoder *encoder)
>> dig_port->saved_port_bits |= XE2LPD_DDI_BUF_D2D_LINK_ENABLE;
>> wait_bits = XE2LPD_DDI_BUF_D2D_LINK_STATE;
>> } else {
>> - reg = XELPDP_PORT_BUF_CTL1(port);
>> + reg = xelpdp_port_buf_ctl1_reg(dev_priv, port);
>> set_bits = XELPDP_PORT_BUF_D2D_LINK_ENABLE;
>> wait_bits = XELPDP_PORT_BUF_D2D_LINK_STATE;
>> }
>> @@ -2385,7 +2387,7 @@ static void mtl_port_buf_ctl_program(struct intel_encoder *encoder,
>> enum port port = encoder->port;
>> u32 val;
>>
>> - val = intel_de_read(i915, XELPDP_PORT_BUF_CTL1(port));
>> + val = intel_de_read(i915, xelpdp_port_buf_ctl1_reg(i915, port));
>> val &= ~XELPDP_PORT_WIDTH_MASK;
>> val |= XELPDP_PORT_WIDTH(mtl_get_port_width(crtc_state->lane_count));
>>
>> @@ -2398,7 +2400,7 @@ static void mtl_port_buf_ctl_program(struct intel_encoder *encoder,
>> if (dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL)
>> val |= XELPDP_PORT_REVERSAL;
>>
>> - intel_de_write(i915, XELPDP_PORT_BUF_CTL1(port), val);
>> + intel_de_write(i915, xelpdp_port_buf_ctl1_reg(i915, port), val);
>> }
>>
>> static void mtl_port_buf_ctl_io_selection(struct intel_encoder *encoder)
>> @@ -2409,7 +2411,7 @@ static void mtl_port_buf_ctl_io_selection(struct intel_encoder *encoder)
>>
>> val = intel_tc_port_in_tbt_alt_mode(dig_port) ?
>> XELPDP_PORT_BUF_IO_SELECT_TBT : 0;
>> - intel_de_rmw(i915, XELPDP_PORT_BUF_CTL1(encoder->port),
>> + intel_de_rmw(i915, xelpdp_port_buf_ctl1_reg(i915, encoder->port),
>> XELPDP_PORT_BUF_IO_SELECT_TBT, val);
>> }
>>
>> @@ -2829,7 +2831,7 @@ mtl_ddi_disable_d2d_link(struct intel_encoder *encoder)
>> dig_port->saved_port_bits &= ~XE2LPD_DDI_BUF_D2D_LINK_ENABLE;
>> wait_bits = XE2LPD_DDI_BUF_D2D_LINK_STATE;
>> } else {
>> - reg = XELPDP_PORT_BUF_CTL1(port);
>> + reg = xelpdp_port_buf_ctl1_reg(dev_priv, port);
>> clr_bits = XELPDP_PORT_BUF_D2D_LINK_ENABLE;
>> wait_bits = XELPDP_PORT_BUF_D2D_LINK_STATE;
>> }
>> @@ -2967,7 +2969,7 @@ static void intel_ddi_post_disable_dp(struct intel_atomic_state *state,
>>
>> /* De-select Thunderbolt */
>> if (DISPLAY_VER(dev_priv) >= 14)
>> - intel_de_rmw(dev_priv, XELPDP_PORT_BUF_CTL1(encoder->port),
>> + intel_de_rmw(dev_priv, xelpdp_port_buf_ctl1_reg(dev_priv, encoder->port),
>> XELPDP_PORT_BUF_IO_SELECT_TBT, 0);
>> }
>
>--
>Jani Nikula, Intel Open Source Graphics Center
More information about the Intel-gfx
mailing list