[Intel-gfx] [PATCH v3 3/4] drm/i915/hdcp: Send the correct aux for DPMST HDCP scenario
Suraj Kandpal
suraj.kandpal at intel.com
Mon Aug 28 06:34:00 UTC 2023
Up until now we were sending the base aux stored in dig_port which
is not correct as this causes an issue when monitor is connected via
a DPMST hub causing it to be remote hence we end up seeing AUX
failures so let's send the remote aux in case of DPMST.
Signed-off-by: Suraj Kandpal <suraj.kandpal at intel.com>
Reviewed-by: Arun R Murthy <arun.r.mruthy at intel.com>
---
drivers/gpu/drm/i915/display/intel_dp_hdcp.c | 27 +++++++++++++++-----
1 file changed, 20 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
index 59ef77476cb9..df68fd8f2eed 100644
--- a/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp_hdcp.c
@@ -330,15 +330,26 @@ static const struct hdcp2_dp_msg_data hdcp2_dp_msg_data[] = {
0, 0 },
};
+static struct drm_dp_aux *
+intel_dp_hdcp_get_aux(struct intel_connector *connector)
+{
+ struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
+
+ if (intel_encoder_is_mst(connector->encoder))
+ return &connector->port->aux;
+ else
+ return &dig_port->dp.aux;
+}
+
static int
intel_dp_hdcp2_read_rx_status(struct intel_connector *connector,
u8 *rx_status)
{
struct drm_i915_private *i915 = to_i915(connector->base.dev);
- struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
+ struct drm_dp_aux *aux = intel_dp_hdcp_get_aux(connector);
ssize_t ret;
- ret = drm_dp_dpcd_read(&dig_port->dp.aux,
+ ret = drm_dp_dpcd_read(aux,
DP_HDCP_2_2_REG_RXSTATUS_OFFSET, rx_status,
HDCP_2_2_DP_RXSTATUS_LEN);
if (ret != HDCP_2_2_DP_RXSTATUS_LEN) {
@@ -440,7 +451,6 @@ static
int intel_dp_hdcp2_write_msg(struct intel_connector *connector,
void *buf, size_t size)
{
- struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
unsigned int offset;
u8 *byte = buf;
ssize_t ret, bytes_to_write, len;
@@ -453,7 +463,7 @@ int intel_dp_hdcp2_write_msg(struct intel_connector *connector,
offset = hdcp2_msg_data->offset;
- aux = &dig_port->dp.aux;
+ aux = intel_dp_hdcp_get_aux(connector);
/* No msg_id in DP HDCP2.2 msgs */
bytes_to_write = size - 1;
@@ -480,11 +490,11 @@ static
ssize_t get_receiver_id_list_rx_info(struct intel_connector *connector,
u32 *dev_cnt, u8 *byte)
{
- struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
+ struct drm_dp_aux *aux = intel_dp_hdcp_get_aux(connector);
ssize_t ret;
u8 *rx_info = byte;
- ret = drm_dp_dpcd_read(&dig_port->dp.aux,
+ ret = drm_dp_dpcd_read(aux,
DP_HDCP_2_2_REG_RXINFO_OFFSET,
(void *)rx_info, HDCP_2_2_RXINFO_LEN);
if (ret != HDCP_2_2_RXINFO_LEN)
@@ -506,6 +516,7 @@ int intel_dp_hdcp2_read_msg(struct intel_connector *connector,
struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
struct intel_hdcp *hdcp = &connector->hdcp;
+ struct drm_dp_aux *aux;
unsigned int offset;
u8 *byte = buf;
ssize_t ret, bytes_to_recv, len;
@@ -519,6 +530,8 @@ int intel_dp_hdcp2_read_msg(struct intel_connector *connector,
return -EINVAL;
offset = hdcp2_msg_data->offset;
+ aux = intel_dp_hdcp_get_aux(connector);
+
ret = intel_dp_hdcp2_wait_for_msg(connector, hdcp2_msg_data);
if (ret < 0)
return ret;
@@ -551,7 +564,7 @@ int intel_dp_hdcp2_read_msg(struct intel_connector *connector,
msg_end = ktime_add_ms(ktime_get_raw(),
hdcp2_msg_data->msg_read_timeout);
- ret = drm_dp_dpcd_read(&dig_port->dp.aux, offset,
+ ret = drm_dp_dpcd_read(aux, offset,
(void *)byte, len);
if (ret < 0) {
drm_dbg_kms(&i915->drm, "msg_id %d, ret %zd\n",
--
2.25.1
More information about the Intel-gfx
mailing list