[Intel-gfx] [PATCH 5/6] drm/i915: Adjust seamless_m_n flag behaviour
Ville Syrjälä
ville.syrjala at linux.intel.com
Tue Aug 29 08:20:45 UTC 2023
On Mon, Aug 28, 2023 at 04:58:49PM +0000, Golani, Mitulkumar Ajitkumar wrote:
> Hi Ville,
>
> > -----Original Message-----
> > From: Intel-gfx <intel-gfx-bounces at lists.freedesktop.org> On Behalf Of Ville
> > Syrjala
> > Sent: 28 August 2023 11:12
> > To: intel-gfx at lists.freedesktop.org
> > Subject: [Intel-gfx] [PATCH 5/6] drm/i915: Adjust seamless_m_n flag
> > behaviour
> >
> > From: Ville Syrjälä <ville.syrjala at linux.intel.com>
> >
> > Make the seamless_m_n flag more like the update_pipe fastset flag, ie. the
> > flag will only be set if we need to do the seamless M/N update, and in all
> > other cases the flag is cleared. Also rename the flag to update_m_n to
> > make it more clear it's similar to update_pipe.
> >
> > I believe special casing seamless_m_n like this makes sense as it also affects
> > eg. vblank evasion. We can potentially avoid some vblank evasion tricks,
> > simplify some checks, and hopefully will help with the VRR vs. M/N mess.
> >
> > Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_atomic.c | 1 +
> > drivers/gpu/drm/i915/display/intel_crtc.c | 2 +-
> > drivers/gpu/drm/i915/display/intel_display.c | 22 +++++++++++--------
> > .../drm/i915/display/intel_display_types.h | 2 +-
> > drivers/gpu/drm/i915/display/intel_dp.c | 2 +-
> > 5 files changed, 17 insertions(+), 12 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_atomic.c
> > b/drivers/gpu/drm/i915/display/intel_atomic.c
> > index 7cf51dd8c056..aaddd8c0cfa0 100644
> > --- a/drivers/gpu/drm/i915/display/intel_atomic.c
> > +++ b/drivers/gpu/drm/i915/display/intel_atomic.c
> > @@ -259,6 +259,7 @@ intel_crtc_duplicate_state(struct drm_crtc *crtc)
> > drm_property_blob_get(crtc_state->post_csc_lut);
> >
> > crtc_state->update_pipe = false;
> > + crtc_state->update_m_n = false;
> > crtc_state->disable_lp_wm = false;
> > crtc_state->disable_cxsr = false;
> > crtc_state->update_wm_pre = false;
> > diff --git a/drivers/gpu/drm/i915/display/intel_crtc.c
> > b/drivers/gpu/drm/i915/display/intel_crtc.c
> > index 1992e7060263..a04076064f02 100644
> > --- a/drivers/gpu/drm/i915/display/intel_crtc.c
> > +++ b/drivers/gpu/drm/i915/display/intel_crtc.c
> > @@ -510,7 +510,7 @@ static void intel_crtc_vblank_evade_scanlines(struct
> > intel_atomic_state *state,
> > * M/N is double buffered on the transcoder's undelayed vblank,
> > * so with seamless M/N we must evade both vblanks.
> > */
> > - if (new_crtc_state->seamless_m_n &&
> > intel_crtc_needs_fastset(new_crtc_state))
> > + if (new_crtc_state->update_m_n)
> > *min -= adjusted_mode->crtc_vblank_start -
> > adjusted_mode->crtc_vdisplay; }
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > b/drivers/gpu/drm/i915/display/intel_display.c
> > index 632f1f58df9e..6196ef76390b 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -5170,7 +5170,7 @@ intel_pipe_config_compare(const struct
> > intel_crtc_state *current_config,
> > PIPE_CONF_CHECK_X(lane_lat_optim_mask);
> >
> > if (HAS_DOUBLE_BUFFERED_M_N(dev_priv)) {
> > - if (!fastset || !pipe_config->seamless_m_n)
> > + if (!fastset || !pipe_config->update_m_n)
> > PIPE_CONF_CHECK_M_N(dp_m_n);
> > } else {
> > PIPE_CONF_CHECK_M_N(dp_m_n);
> > @@ -5307,7 +5307,7 @@ intel_pipe_config_compare(const struct
> > intel_crtc_state *current_config,
> > if (IS_G4X(dev_priv) || DISPLAY_VER(dev_priv) >= 5)
> > PIPE_CONF_CHECK_I(pipe_bpp);
> >
> > - if (!fastset || !pipe_config->seamless_m_n) {
> > + if (!fastset || !pipe_config->update_m_n) {
> > PIPE_CONF_CHECK_I(hw.pipe_mode.crtc_clock);
> > PIPE_CONF_CHECK_I(hw.adjusted_mode.crtc_clock);
> > }
> > @@ -5402,6 +5402,7 @@ int intel_modeset_all_pipes(struct
> > intel_atomic_state *state,
> >
> > crtc_state->uapi.mode_changed = true;
> > crtc_state->update_pipe = false;
> > + crtc_state->update_m_n = false;
> >
> > ret = drm_atomic_add_affected_connectors(&state->base,
> > &crtc->base);
> > @@ -5519,13 +5520,14 @@ static void intel_crtc_check_fastset(const struct
> > intel_crtc_state *old_crtc_sta {
> > struct drm_i915_private *i915 = to_i915(old_crtc_state->uapi.crtc-
> > >dev);
> >
> > - if (!intel_pipe_config_compare(old_crtc_state, new_crtc_state,
> > true)) {
> > + if (!intel_pipe_config_compare(old_crtc_state, new_crtc_state,
> > true))
> > drm_dbg_kms(&i915->drm, "fastset requirement not met,
> > forcing full modeset\n");
> > + else
> > + new_crtc_state->uapi.mode_changed = false;
> >
> > - return;
> > - }
> > + if (intel_crtc_needs_modeset(new_crtc_state))
> > + new_crtc_state->update_m_n = false;
> >
> > - new_crtc_state->uapi.mode_changed = false;
> > if (!intel_crtc_needs_modeset(new_crtc_state))
> > new_crtc_state->update_pipe = true;
> > }
> > @@ -6240,6 +6242,7 @@ int intel_atomic_check(struct drm_device *dev,
> > if (intel_cpu_transcoders_need_modeset(state,
> > BIT(master))) {
> > new_crtc_state->uapi.mode_changed = true;
> > new_crtc_state->update_pipe = false;
> > + new_crtc_state->update_m_n = false;
> > }
> > }
> >
> > @@ -6252,6 +6255,7 @@ int intel_atomic_check(struct drm_device *dev,
> > if (intel_cpu_transcoders_need_modeset(state,
> > trans)) {
> > new_crtc_state->uapi.mode_changed = true;
> > new_crtc_state->update_pipe = false;
> > + new_crtc_state->update_m_n = false;
> > }
> > }
> >
> > @@ -6259,6 +6263,7 @@ int intel_atomic_check(struct drm_device *dev,
> > if (intel_pipes_need_modeset(state, new_crtc_state-
> > >bigjoiner_pipes)) {
> > new_crtc_state->uapi.mode_changed = true;
> > new_crtc_state->update_pipe = false;
> > + new_crtc_state->update_m_n = false;
> > }
> > }
> > }
> > @@ -6437,7 +6442,7 @@ static void intel_pipe_fastset(const struct
> > intel_crtc_state *old_crtc_state,
> > IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
> > hsw_set_linetime_wm(new_crtc_state);
> >
> > - if (new_crtc_state->seamless_m_n)
> > + if (new_crtc_state->update_m_n)
> > intel_cpu_transcoder_set_m1_n1(crtc, new_crtc_state-
> > >cpu_transcoder,
> > &new_crtc_state->dp_m_n);
> > }
> > @@ -6573,8 +6578,7 @@ static void intel_update_crtc(struct
> > intel_atomic_state *state,
> > *
> > * FIXME Should be synchronized with the start of vblank
> > somehow...
> > */
> > - if (vrr_enabling(old_crtc_state, new_crtc_state) ||
> > - (new_crtc_state->seamless_m_n &&
> > intel_crtc_needs_fastset(new_crtc_state)))
> > + if (vrr_enabling(old_crtc_state, new_crtc_state) ||
> > +new_crtc_state->update_m_n)
> > intel_crtc_update_active_timings(new_crtc_state,
> > new_crtc_state->vrr.enable);
>
> In the context where a Push has already been sent, should the update occur when we enable VRR itself? I'm curious about the rationale for not updating it immediately upon enabling VRR.
The active timings should really be updated synchronously
with the hardware latching the new values. But that is actually
impossible so some race conditions will always remain.
I haven't actually verified how the hardware behaves when we
enable VRR. I assume the VRR_CTL will get latched at the next
start of vblank as well. But we should really try to confirm
that on actual hardware.
The case where we have VRR already enabled while updating
M/N might go badly with the current order of doing things
as the vblank irq may trigger immediately upon push. So for
that case it would be better to update the active timings
before the push. Or perhaps we should just make sure VRR is
always disabled around M/N updates...
>
> Regards,
> Mitul
> > b/drivers/gpu/drm/i915/display/intel_display_types.h
> > index 731f2ec04d5c..2367b030b469 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> > @@ -1083,6 +1083,7 @@ struct intel_crtc_state {
> >
> > unsigned fb_bits; /* framebuffers to flip */
> > bool update_pipe; /* can a fast modeset be performed? */
> > + bool update_m_n; /* update M/N seamlessly during fastset? */
> > bool disable_cxsr;
> > bool update_wm_pre, update_wm_post; /* watermarks are
> > updated */
> > bool fifo_changed; /* FIFO split is changed */ @@ -1195,7 +1196,6
> > @@ struct intel_crtc_state {
> > /* m2_n2 for eDP downclock */
> > struct intel_link_m_n dp_m2_n2;
> > bool has_drrs;
> > - bool seamless_m_n;
> >
> > /* PSR is supported but might not be enabled due the lack of
> > enabled planes */
> > bool has_psr;
> > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c
> > b/drivers/gpu/drm/i915/display/intel_dp.c
> > index 05694e0b6143..ceab5b26b5e8 100644
> > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > @@ -2535,7 +2535,7 @@ intel_dp_drrs_compute_config(struct
> > intel_connector *connector,
> > int pixel_clock;
> >
> > if (has_seamless_m_n(connector))
> > - pipe_config->seamless_m_n = true;
> > + pipe_config->update_m_n = true;
> >
> > if (!can_enable_drrs(connector, pipe_config, downclock_mode)) {
> > if (intel_cpu_transcoder_has_m2_n2(i915, pipe_config-
> > >cpu_transcoder))
> > --
> > 2.41.0
>
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list