[Intel-gfx] [PATCH 04/12] drm/i915/lvds: Populate connector->ddc

[Jani Nikula]

On Tue, 29 Aug 2023, Ville Syrjala <ville.syrjala at linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Populate connector->ddc, and thus create the "ddc" symlink
> in sysfs for the LVDS port.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

> ---
>  drivers/gpu/drm/i915/display/intel_lvds.c | 23 +++++++++++------------
>  1 file changed, 11 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_lvds.c b/drivers/gpu/drm/i915/display/intel_lvds.c
> index 3ace56979b70..2306e133e3f6 100644
> --- a/drivers/gpu/drm/i915/display/intel_lvds.c
> +++ b/drivers/gpu/drm/i915/display/intel_lvds.c
> @@ -837,7 +837,7 @@ void intel_lvds_init(struct drm_i915_private *i915)
>  	struct intel_encoder *encoder;
>  	i915_reg_t lvds_reg;
>  	u32 lvds;
> -	u8 pin;
> +	u8 ddc_pin;
>  
>  	/* Skip init on machines we know falsely report LVDS */
>  	if (dmi_check_system(intel_no_lvds)) {
> @@ -864,8 +864,8 @@ void intel_lvds_init(struct drm_i915_private *i915)
>  			return;
>  	}
>  
> -	pin = GMBUS_PIN_PANEL;
> -	if (!intel_bios_is_lvds_present(i915, &pin)) {
> +	ddc_pin = GMBUS_PIN_PANEL;
> +	if (!intel_bios_is_lvds_present(i915, &ddc_pin)) {
>  		if ((lvds & LVDS_PORT_EN) == 0) {
>  			drm_dbg_kms(&i915->drm,
>  				    "LVDS is not present in VBT\n");
> @@ -888,8 +888,10 @@ void intel_lvds_init(struct drm_i915_private *i915)
>  	lvds_encoder->attached_connector = connector;
>  	encoder = &lvds_encoder->base;
>  
> -	drm_connector_init(&i915->drm, &connector->base, &intel_lvds_connector_funcs,
> -			   DRM_MODE_CONNECTOR_LVDS);
> +	drm_connector_init_with_ddc(&i915->drm, &connector->base,
> +				    &intel_lvds_connector_funcs,
> +				    DRM_MODE_CONNECTOR_LVDS,
> +				    intel_gmbus_get_adapter(i915, ddc_pin));
>  
>  	drm_encoder_init(&i915->drm, &encoder->base, &intel_lvds_enc_funcs,
>  			 DRM_MODE_ENCODER_LVDS, "LVDS");
> @@ -943,13 +945,10 @@ void intel_lvds_init(struct drm_i915_private *i915)
>  	 * preferred mode is the right one.
>  	 */
>  	mutex_lock(&i915->drm.mode_config.mutex);
> -	if (vga_switcheroo_handler_flags() & VGA_SWITCHEROO_CAN_SWITCH_DDC) {
> -		drm_edid = drm_edid_read_switcheroo(&connector->base,
> -						    intel_gmbus_get_adapter(i915, pin));
> -	} else {
> -		drm_edid = drm_edid_read_ddc(&connector->base,
> -					     intel_gmbus_get_adapter(i915, pin));
> -	}
> +	if (vga_switcheroo_handler_flags() & VGA_SWITCHEROO_CAN_SWITCH_DDC)
> +		drm_edid = drm_edid_read_switcheroo(&connector->base, connector->base.ddc);
> +	else
> +		drm_edid = drm_edid_read_ddc(&connector->base, connector->base.ddc);
>  	if (drm_edid) {
>  		if (drm_edid_connector_update(&connector->base, drm_edid) ||
>  		    !drm_edid_connector_add_modes(&connector->base)) {

-- 
Jani Nikula, Intel Open Source Graphics Center