[Intel-gfx] [PATCH 2/3] drm/i915/display: Convert link bitrate to corresponding PLL clock
Kahola, Mika
mika.kahola at intel.com
Tue Dec 5 08:28:21 UTC 2023
> -----Original Message-----
> From: Sripada, Radhakrishna <radhakrishna.sripada at intel.com>
> Sent: Tuesday, December 5, 2023 3:36 AM
> To: Kahola, Mika <mika.kahola at intel.com>; intel-gfx at lists.freedesktop.org
> Subject: RE: [Intel-gfx] [PATCH 2/3] drm/i915/display: Convert link bitrate to corresponding PLL clock
>
> Hi Mika,
>
> > -----Original Message-----
> > From: Intel-gfx <intel-gfx-bounces at lists.freedesktop.org> On Behalf Of
> > Mika Kahola
> > Sent: Monday, December 4, 2023 3:59 AM
> > To: intel-gfx at lists.freedesktop.org
> > Subject: [Intel-gfx] [PATCH 2/3] drm/i915/display: Convert link
> > bitrate to corresponding PLL clock
> >
> > Compute clock during PLL readout. This prevents warn when only c20 phy
> > is connected during modprobe. The intel_c20pll_calc_port_clock()
> > function returns link bitrate which in DP2.0 and HDMI cases does not
> > match with the clock rate. Hence, conversion function is needed to
> > convert link bitrate to corresponding PLL clock rate.
> >
> > while at it, update clock on C10 pll state as well.
> >
> > Signed-off-by: Clint Taylor <Clinton.A.Taylor at intel.com>
> > Signed-off-by: Mika Kahola <mika.kahola at intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_cx0_phy.c | 38
> > ++++++++++++++++++-- drivers/gpu/drm/i915/display/intel_cx0_phy.h | 1 +
> > drivers/gpu/drm/i915/display/intel_ddi.c | 2 +-
> > 3 files changed, 37 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> > b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> > index 2e6412fc2258..02efe2786c6a 100644
> > --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> > +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> > @@ -1871,6 +1871,7 @@ static int intel_c10pll_calc_state(struct
> > intel_crtc_state *crtc_state, }
> >
> > static void intel_c10pll_readout_hw_state(struct intel_encoder
> > *encoder,
> > + struct intel_crtc_state *crtc_state,
> > struct intel_c10pll_state *pll_state) {
> > struct drm_i915_private *i915 = to_i915(encoder->base.dev); @@
> > -1894,6 +1895,7 @@ static void intel_c10pll_readout_hw_state(struct
> > intel_encoder *encoder,
> >
> > pll_state->cmn = intel_cx0_read(i915, encoder->port, lane,
> > PHY_C10_VDR_CMN(0));
> > pll_state->tx = intel_cx0_read(i915, encoder->port, lane,
> > PHY_C10_VDR_TX(0));
> > + pll_state->clock = crtc_state->port_clock;
> >
> > intel_cx0_phy_transaction_end(encoder, wakeref); } @@ -2445,12
> > +2447,33 @@ static void intel_program_port_clock_ctl(struct
> > intel_encoder *encoder,
> > XELPDP_SSC_ENABLE_PLLB, val);
> > }
> >
> > +static int intel_link_bitrate_to_clock(struct intel_encoder *encoder,
> > + struct intel_crtc_state *crtc_state,
> > + int link_bit_rate)
> > +{
> > + const struct intel_c20pll_state * const *tables;
> > + int i;
> > +
> > + tables = intel_c20_pll_tables_get(crtc_state, encoder);
> This will produce incorrect result. intel_c20_pll_tables_get depends on intel_crtc_has_{dp_encoder,hdmi..} which depends
> crtc_state->output_types to determine edp/dp/hdmi table which is not initialized until later in mtl_ddi_init_config under
> intel_ddi_get_config -> intel_ddi_read_func_ctl
>
> We might be needing a separate sanitization of initial pll state to be done after intel_ddi_get_config. Or a special case to handle
> initial modeset.
I actually noticed this while testing it that at first we don't even get the tables and function returns with -EINVAL. Eventually we do get the correct table and clock.
Maybe it would be better to simply use the if-else ladder for those cases that differs from link bitrate vs. clock?
>
> --Radhakrishna Sripada
> > + if (!tables)
> > + return -EINVAL;
> > +
> > + for (i = 0; tables[i]; i++) {
> > + if (link_bit_rate == tables[i]->link_bit_rate)
> > + return tables[i]->clock;
> > + }
> > +
> > + return -EINVAL;
> > +}
> > +
> > static void intel_c20pll_readout_hw_state(struct intel_encoder
> > *encoder,
> > + struct intel_crtc_state *crtc_state,
> > struct intel_c20pll_state *pll_state) {
> > struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> > bool cntx;
> > intel_wakeref_t wakeref;
> > + int clock;
> > int i;
> >
> > wakeref = intel_cx0_phy_transaction_begin(encoder);
> > @@ -2500,6 +2523,13 @@ static void
> > intel_c20pll_readout_hw_state(struct
> > intel_encoder *encoder,
> > }
> > }
> >
> > + pll_state->link_bit_rate = intel_c20pll_calc_port_clock(encoder,
> > pll_state);
> > + clock = intel_link_bitrate_to_clock(encoder, crtc_state,
> > + pll_state->link_bit_rate);
> > +
> > + if (clock >= 0)
> > + pll_state->clock = clock;
> > +
> > intel_cx0_phy_transaction_end(encoder, wakeref); }
> >
> > @@ -3053,15 +3083,16 @@ static void intel_c10pll_state_verify(const
> > struct intel_crtc_state *state, }
> >
> > void intel_cx0pll_readout_hw_state(struct intel_encoder *encoder,
> > + struct intel_crtc_state *crtc_state,
> > struct intel_cx0pll_state *pll_state) {
> > struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> > enum phy phy = intel_port_to_phy(i915, encoder->port);
> >
> > if (intel_is_c10phy(i915, phy))
> > - intel_c10pll_readout_hw_state(encoder, &pll_state->c10);
> > + intel_c10pll_readout_hw_state(encoder, crtc_state, &pll_state-
> > >c10);
> > else
> > - intel_c20pll_readout_hw_state(encoder, &pll_state->c20);
> > + intel_c20pll_readout_hw_state(encoder, crtc_state, &pll_state-
> > >c20);
> > }
> >
> > int intel_cx0pll_calc_port_clock(struct intel_encoder *encoder, @@
> > -3145,7 +3176,8 @@ void intel_cx0pll_state_verify(struct
> > intel_atomic_state *state,
> > if (intel_tc_port_in_tbt_alt_mode(enc_to_dig_port(encoder)))
> > return;
> >
> > - intel_cx0pll_readout_hw_state(encoder, &mpll_hw_state);
> > + intel_cx0pll_readout_hw_state(encoder, (struct
> > intel_crtc_state*)new_crtc_state,
> > + &mpll_hw_state);
> >
> > if (intel_is_c10phy(i915, phy))
> > intel_c10pll_state_verify(new_crtc_state, crtc, encoder,
> > &mpll_hw_state.c10); diff --git
> > a/drivers/gpu/drm/i915/display/intel_cx0_phy.h
> > b/drivers/gpu/drm/i915/display/intel_cx0_phy.h
> > index c6682677253a..eac7354e9a4e 100644
> > --- a/drivers/gpu/drm/i915/display/intel_cx0_phy.h
> > +++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.h
> > @@ -32,6 +32,7 @@ intel_mtl_port_pll_type(struct intel_encoder
> > *encoder,
> >
> > int intel_cx0pll_calc_state(struct intel_crtc_state *crtc_state,
> > struct intel_encoder *encoder); void
> > intel_cx0pll_readout_hw_state(struct intel_encoder *encoder,
> > + struct intel_crtc_state *crtc_state,
> > struct intel_cx0pll_state *pll_state); int
> > intel_cx0pll_calc_port_clock(struct intel_encoder *encoder,
> > const struct intel_cx0pll_state *pll_state); diff --git
> > a/drivers/gpu/drm/i915/display/intel_ddi.c
> > b/drivers/gpu/drm/i915/display/intel_ddi.c
> > index 38f28c480b38..508d3363e89f 100644
> > --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> > @@ -3953,7 +3953,7 @@ static void mtl_ddi_get_config(struct
> > intel_encoder *encoder,
> > if (intel_tc_port_in_tbt_alt_mode(dig_port)) {
> > crtc_state->port_clock =
> > intel_mtl_tbt_calc_port_clock(encoder);
> > } else {
> > - intel_cx0pll_readout_hw_state(encoder, &crtc_state-
> > >cx0pll_state);
> > + intel_cx0pll_readout_hw_state(encoder, crtc_state, &crtc_state-
> > >cx0pll_state);
> > crtc_state->port_clock = intel_cx0pll_calc_port_clock(encoder,
> > &crtc_state->cx0pll_state);
> > }
> >
> > --
> > 2.34.1
More information about the Intel-gfx
mailing list