[PATCH 7/9] drm/i915: Move intel_vblank_evade() & co. into intel_vblank.c
Ville Syrjala
ville.syrjala at linux.intel.com
Wed Dec 13 10:25:17 UTC 2023
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
intel_vblank.c seems like the appropriate place for the core
vblank evasion code. Move it there.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_crtc.c | 135 --------------------
drivers/gpu/drm/i915/display/intel_vblank.c | 130 +++++++++++++++++++
drivers/gpu/drm/i915/display/intel_vblank.h | 12 ++
3 files changed, 142 insertions(+), 135 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_crtc.c b/drivers/gpu/drm/i915/display/intel_crtc.c
index 11a6a4b0a258..25593f6aae7d 100644
--- a/drivers/gpu/drm/i915/display/intel_crtc.c
+++ b/drivers/gpu/drm/i915/display/intel_crtc.c
@@ -461,141 +461,6 @@ int intel_usecs_to_scanlines(const struct drm_display_mode *adjusted_mode,
1000 * adjusted_mode->crtc_htotal);
}
-static int intel_mode_vblank_start(const struct drm_display_mode *mode)
-{
- int vblank_start = mode->crtc_vblank_start;
-
- if (mode->flags & DRM_MODE_FLAG_INTERLACE)
- vblank_start = DIV_ROUND_UP(vblank_start, 2);
-
- return vblank_start;
-}
-
-struct intel_vblank_evade_ctx {
- struct intel_crtc *crtc;
- int min, max, vblank_start;
- bool need_vlv_dsi_wa;
-};
-
-static void intel_vblank_evade_init(const struct intel_crtc_state *old_crtc_state,
- const struct intel_crtc_state *new_crtc_state,
- struct intel_vblank_evade_ctx *evade)
-{
- struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
- struct drm_i915_private *i915 = to_i915(crtc->base.dev);
- const struct intel_crtc_state *crtc_state;
- const struct drm_display_mode *adjusted_mode;
-
- evade->crtc = crtc;
-
- evade->need_vlv_dsi_wa = (IS_VALLEYVIEW(i915) || IS_CHERRYVIEW(i915)) &&
- intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI);
-
- /*
- * During fastsets/etc. the transcoder is still
- * running with the old timings at this point.
- *
- * TODO: maybe just use the active timings here?
- */
- if (intel_crtc_needs_modeset(new_crtc_state))
- crtc_state = new_crtc_state;
- else
- crtc_state = old_crtc_state;
-
- adjusted_mode = &crtc_state->hw.adjusted_mode;
-
- if (crtc->mode_flags & I915_MODE_FLAG_VRR) {
- /* timing changes should happen with VRR disabled */
- drm_WARN_ON(crtc->base.dev, intel_crtc_needs_modeset(new_crtc_state) ||
- new_crtc_state->update_m_n || new_crtc_state->update_lrr);
-
- if (intel_vrr_is_push_sent(crtc_state))
- evade->vblank_start = intel_vrr_vmin_vblank_start(crtc_state);
- else
- evade->vblank_start = intel_vrr_vmax_vblank_start(crtc_state);
- } else {
- evade->vblank_start = intel_mode_vblank_start(adjusted_mode);
- }
-
- /* FIXME needs to be calibrated sensibly */
- evade->min = evade->vblank_start - intel_usecs_to_scanlines(adjusted_mode,
- VBLANK_EVASION_TIME_US);
- evade->max = evade->vblank_start - 1;
-
- /*
- * M/N and TRANS_VTOTAL are double buffered on the transcoder's
- * undelayed vblank, so with seamless M/N and LRR we must evade
- * both vblanks.
- *
- * DSB execution waits for the transcoder's undelayed vblank,
- * hence we must kick off the commit before that.
- */
- if (new_crtc_state->dsb || new_crtc_state->update_m_n || new_crtc_state->update_lrr)
- evade->min -= adjusted_mode->crtc_vblank_start - adjusted_mode->crtc_vdisplay;
-}
-
-/* must be called with vblank interrupt already enabled! */
-static int intel_vblank_evade(struct intel_vblank_evade_ctx *evade)
-{
- struct intel_crtc *crtc = evade->crtc;
- struct drm_i915_private *i915 = to_i915(crtc->base.dev);
- long timeout = msecs_to_jiffies_timeout(1);
- wait_queue_head_t *wq = drm_crtc_vblank_waitqueue(&crtc->base);
- DEFINE_WAIT(wait);
- int scanline;
-
- if (evade->min <= 0 || evade->max <= 0)
- return 0;
-
- for (;;) {
- /*
- * prepare_to_wait() has a memory barrier, which guarantees
- * other CPUs can see the task state update by the time we
- * read the scanline.
- */
- prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
-
- scanline = intel_get_crtc_scanline(crtc);
- if (scanline < evade->min || scanline > evade->max)
- break;
-
- if (!timeout) {
- drm_err(&i915->drm,
- "Potential atomic update failure on pipe %c\n",
- pipe_name(crtc->pipe));
- break;
- }
-
- local_irq_enable();
-
- timeout = schedule_timeout(timeout);
-
- local_irq_disable();
- }
-
- finish_wait(wq, &wait);
-
- /*
- * On VLV/CHV DSI the scanline counter would appear to
- * increment approx. 1/3 of a scanline before start of vblank.
- * The registers still get latched at start of vblank however.
- * This means we must not write any registers on the first
- * line of vblank (since not the whole line is actually in
- * vblank). And unfortunately we can't use the interrupt to
- * wait here since it will fire too soon. We could use the
- * frame start interrupt instead since it will fire after the
- * critical scanline, but that would require more changes
- * in the interrupt code. So for now we'll just do the nasty
- * thing and poll for the bad scanline to pass us by.
- *
- * FIXME figure out if BXT+ DSI suffers from this as well
- */
- while (evade->need_vlv_dsi_wa && scanline == evade->vblank_start)
- scanline = intel_get_crtc_scanline(crtc);
-
- return scanline;
-}
-
/**
* intel_pipe_update_start() - start update of a set of display registers
* @state: the atomic state
diff --git a/drivers/gpu/drm/i915/display/intel_vblank.c b/drivers/gpu/drm/i915/display/intel_vblank.c
index fe256bf7b485..baf7354cb6e2 100644
--- a/drivers/gpu/drm/i915/display/intel_vblank.c
+++ b/drivers/gpu/drm/i915/display/intel_vblank.c
@@ -5,6 +5,7 @@
#include "i915_drv.h"
#include "i915_reg.h"
+#include "intel_crtc.h"
#include "intel_de.h"
#include "intel_display_types.h"
#include "intel_vblank.h"
@@ -581,3 +582,132 @@ void intel_crtc_update_active_timings(const struct intel_crtc_state *crtc_state,
intel_vblank_section_exit(i915);
spin_unlock_irqrestore(&i915->drm.vblank_time_lock, irqflags);
}
+
+static int intel_mode_vblank_start(const struct drm_display_mode *mode)
+{
+ int vblank_start = mode->crtc_vblank_start;
+
+ if (mode->flags & DRM_MODE_FLAG_INTERLACE)
+ vblank_start = DIV_ROUND_UP(vblank_start, 2);
+
+ return vblank_start;
+}
+
+void intel_vblank_evade_init(const struct intel_crtc_state *old_crtc_state,
+ const struct intel_crtc_state *new_crtc_state,
+ struct intel_vblank_evade_ctx *evade)
+{
+ struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc);
+ struct drm_i915_private *i915 = to_i915(crtc->base.dev);
+ const struct intel_crtc_state *crtc_state;
+ const struct drm_display_mode *adjusted_mode;
+
+ evade->crtc = crtc;
+
+ evade->need_vlv_dsi_wa = (IS_VALLEYVIEW(i915) || IS_CHERRYVIEW(i915)) &&
+ intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI);
+
+ /*
+ * During fastsets/etc. the transcoder is still
+ * running with the old timings at this point.
+ *
+ * TODO: maybe just use the active timings here?
+ */
+ if (intel_crtc_needs_modeset(new_crtc_state))
+ crtc_state = new_crtc_state;
+ else
+ crtc_state = old_crtc_state;
+
+ adjusted_mode = &crtc_state->hw.adjusted_mode;
+
+ if (crtc->mode_flags & I915_MODE_FLAG_VRR) {
+ /* timing changes should happen with VRR disabled */
+ drm_WARN_ON(crtc->base.dev, intel_crtc_needs_modeset(new_crtc_state) ||
+ new_crtc_state->update_m_n || new_crtc_state->update_lrr);
+
+ if (intel_vrr_is_push_sent(crtc_state))
+ evade->vblank_start = intel_vrr_vmin_vblank_start(crtc_state);
+ else
+ evade->vblank_start = intel_vrr_vmax_vblank_start(crtc_state);
+ } else {
+ evade->vblank_start = intel_mode_vblank_start(adjusted_mode);
+ }
+
+ /* FIXME needs to be calibrated sensibly */
+ evade->min = evade->vblank_start - intel_usecs_to_scanlines(adjusted_mode,
+ VBLANK_EVASION_TIME_US);
+ evade->max = evade->vblank_start - 1;
+
+ /*
+ * M/N and TRANS_VTOTAL are double buffered on the transcoder's
+ * undelayed vblank, so with seamless M/N and LRR we must evade
+ * both vblanks.
+ *
+ * DSB execution waits for the transcoder's undelayed vblank,
+ * hence we must kick off the commit before that.
+ */
+ if (new_crtc_state->dsb || new_crtc_state->update_m_n || new_crtc_state->update_lrr)
+ evade->min -= adjusted_mode->crtc_vblank_start - adjusted_mode->crtc_vdisplay;
+}
+
+/* must be called with vblank interrupt already enabled! */
+int intel_vblank_evade(struct intel_vblank_evade_ctx *evade)
+{
+ struct intel_crtc *crtc = evade->crtc;
+ struct drm_i915_private *i915 = to_i915(crtc->base.dev);
+ long timeout = msecs_to_jiffies_timeout(1);
+ wait_queue_head_t *wq = drm_crtc_vblank_waitqueue(&crtc->base);
+ DEFINE_WAIT(wait);
+ int scanline;
+
+ if (evade->min <= 0 || evade->max <= 0)
+ return 0;
+
+ for (;;) {
+ /*
+ * prepare_to_wait() has a memory barrier, which guarantees
+ * other CPUs can see the task state update by the time we
+ * read the scanline.
+ */
+ prepare_to_wait(wq, &wait, TASK_UNINTERRUPTIBLE);
+
+ scanline = intel_get_crtc_scanline(crtc);
+ if (scanline < evade->min || scanline > evade->max)
+ break;
+
+ if (!timeout) {
+ drm_err(&i915->drm,
+ "Potential atomic update failure on pipe %c\n",
+ pipe_name(crtc->pipe));
+ break;
+ }
+
+ local_irq_enable();
+
+ timeout = schedule_timeout(timeout);
+
+ local_irq_disable();
+ }
+
+ finish_wait(wq, &wait);
+
+ /*
+ * On VLV/CHV DSI the scanline counter would appear to
+ * increment approx. 1/3 of a scanline before start of vblank.
+ * The registers still get latched at start of vblank however.
+ * This means we must not write any registers on the first
+ * line of vblank (since not the whole line is actually in
+ * vblank). And unfortunately we can't use the interrupt to
+ * wait here since it will fire too soon. We could use the
+ * frame start interrupt instead since it will fire after the
+ * critical scanline, but that would require more changes
+ * in the interrupt code. So for now we'll just do the nasty
+ * thing and poll for the bad scanline to pass us by.
+ *
+ * FIXME figure out if BXT+ DSI suffers from this as well
+ */
+ while (evade->need_vlv_dsi_wa && scanline == evade->vblank_start)
+ scanline = intel_get_crtc_scanline(crtc);
+
+ return scanline;
+}
diff --git a/drivers/gpu/drm/i915/display/intel_vblank.h b/drivers/gpu/drm/i915/display/intel_vblank.h
index 17636f140c71..ec6c3da3eeac 100644
--- a/drivers/gpu/drm/i915/display/intel_vblank.h
+++ b/drivers/gpu/drm/i915/display/intel_vblank.h
@@ -13,6 +13,18 @@ struct drm_crtc;
struct intel_crtc;
struct intel_crtc_state;
+struct intel_vblank_evade_ctx {
+ struct intel_crtc *crtc;
+ int min, max, vblank_start;
+ bool need_vlv_dsi_wa;
+};
+
+void intel_vblank_evade_init(const struct intel_crtc_state *old_crtc_state,
+ const struct intel_crtc_state *new_crtc_state,
+ struct intel_vblank_evade_ctx *evade);
+/* must be called with vblank interrupt already enabled! */
+int intel_vblank_evade(struct intel_vblank_evade_ctx *evade);
+
u32 i915_get_vblank_counter(struct drm_crtc *crtc);
u32 g4x_get_vblank_counter(struct drm_crtc *crtc);
bool intel_crtc_get_vblank_timestamp(struct drm_crtc *crtc, int *max_error,
--
2.41.0
More information about the Intel-gfx
mailing list