[Intel-gfx] [v10] drm/i915/dsc: Add debugfs entry to validate DSC output formats
Jani Nikula
jani.nikula at intel.com
Tue Feb 14 10:51:57 UTC 2023
On Tue, 14 Feb 2023, Swati Sharma <swati2.sharma at intel.com> wrote:
> DSC_Output_Format_Sink_Support entry is added to i915_dsc_fec_support_show
> to depict if sink supports DSC output formats (RGB/YCbCr420/YCbCr444).
> Also, new debugfs entry is created to enforce output format. This is
> required because of our driver policy. For ex. if a mode is supported
> in both RGB and YCbCr420 output formats by the sink, our policy is to
> try RGB first and fall back to YCbCr420, if mode cannot be shown
> using RGB. So, to test other output formats like YCbCr420 or YCbCr444,
> we need a debugfs entry (force_dsc_output_format) to force this
> output format.
>
> v2: -Func name changed to intel_output_format_name() (Jani N)
> -Return forced o/p format from intel_dp_output_format() (Jani N)
>
> Signed-off-by: Swati Sharma <swati2.sharma at intel.com>
> ---
> .../drm/i915/display/intel_crtc_state_dump.c | 6 +-
> .../drm/i915/display/intel_crtc_state_dump.h | 2 +
> .../drm/i915/display/intel_display_debugfs.c | 77 +++++++++++++++++++
> .../drm/i915/display/intel_display_types.h | 1 +
> drivers/gpu/drm/i915/display/intel_dp.c | 4 +
> 5 files changed, 87 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_crtc_state_dump.c b/drivers/gpu/drm/i915/display/intel_crtc_state_dump.c
> index 2422d6ef5777..2408ba88b0b6 100644
> --- a/drivers/gpu/drm/i915/display/intel_crtc_state_dump.c
> +++ b/drivers/gpu/drm/i915/display/intel_crtc_state_dump.c
> @@ -115,13 +115,13 @@ static void snprintf_output_types(char *buf, size_t len,
> WARN_ON_ONCE(output_types != 0);
> }
>
> -static const char * const output_format_str[] = {
> +const char * const output_format_str[] = {
This still must remain static.
> [INTEL_OUTPUT_FORMAT_RGB] = "RGB",
> [INTEL_OUTPUT_FORMAT_YCBCR420] = "YCBCR4:2:0",
> [INTEL_OUTPUT_FORMAT_YCBCR444] = "YCBCR4:4:4",
> };
>
> -static const char *output_formats(enum intel_output_format format)
> +const char *intel_output_format_name(enum intel_output_format format)
> {
> if (format >= ARRAY_SIZE(output_format_str))
> return "invalid";
> @@ -179,7 +179,7 @@ void intel_crtc_state_dump(const struct intel_crtc_state *pipe_config,
> "active: %s, output_types: %s (0x%x), output format: %s\n",
> str_yes_no(pipe_config->hw.active),
> buf, pipe_config->output_types,
> - output_formats(pipe_config->output_format));
> + intel_output_format_name(pipe_config->output_format));
>
> drm_dbg_kms(&i915->drm,
> "cpu_transcoder: %s, pipe bpp: %i, dithering: %i\n",
> diff --git a/drivers/gpu/drm/i915/display/intel_crtc_state_dump.h b/drivers/gpu/drm/i915/display/intel_crtc_state_dump.h
> index 9399c35b7e5e..780f3f1190d7 100644
> --- a/drivers/gpu/drm/i915/display/intel_crtc_state_dump.h
> +++ b/drivers/gpu/drm/i915/display/intel_crtc_state_dump.h
> @@ -8,9 +8,11 @@
>
> struct intel_crtc_state;
> struct intel_atomic_state;
> +enum intel_output_format;
>
> void intel_crtc_state_dump(const struct intel_crtc_state *crtc_state,
> struct intel_atomic_state *state,
> const char *context);
> +const char *intel_output_format_name(enum intel_output_format format);
>
> #endif /* __INTEL_CRTC_STATE_H__ */
> diff --git a/drivers/gpu/drm/i915/display/intel_display_debugfs.c b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> index 9e2fb8626c96..e4b04c690e4f 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_debugfs.c
> @@ -12,6 +12,7 @@
> #include "i915_irq.h"
> #include "i915_reg.h"
> #include "intel_de.h"
> +#include "intel_crtc_state_dump.h"
> #include "intel_display_debugfs.h"
> #include "intel_display_power.h"
> #include "intel_display_power_well.h"
> @@ -1770,6 +1771,13 @@ static int i915_dsc_fec_support_show(struct seq_file *m, void *data)
> str_yes_no(crtc_state->dsc.compression_enable));
> seq_printf(m, "DSC_Sink_Support: %s\n",
> str_yes_no(drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd)));
> + seq_printf(m, "DSC_Output_Format_Sink_Support: RGB: %s YCBCR420: %s YCBCR444: %s\n",
> + str_yes_no(drm_dp_dsc_sink_supports_format(intel_dp->dsc_dpcd,
> + DP_DSC_RGB)),
> + str_yes_no(drm_dp_dsc_sink_supports_format(intel_dp->dsc_dpcd,
> + DP_DSC_YCbCr420_Native)),
> + str_yes_no(drm_dp_dsc_sink_supports_format(intel_dp->dsc_dpcd,
> + DP_DSC_YCbCr444)));
> seq_printf(m, "Force_DSC_Enable: %s\n",
> str_yes_no(intel_dp->force_dsc_en));
> if (!intel_dp_is_edp(intel_dp))
> @@ -1895,6 +1903,72 @@ static const struct file_operations i915_dsc_bpc_fops = {
> .write = i915_dsc_bpc_write
> };
>
> +static int i915_dsc_output_format_show(struct seq_file *m, void *data)
> +{
> + struct drm_connector *connector = m->private;
> + struct drm_device *dev = connector->dev;
> + struct drm_crtc *crtc;
> + struct intel_crtc_state *crtc_state;
> + struct intel_encoder *encoder = intel_attached_encoder(to_intel_connector(connector));
> + int ret;
> +
> + if (!encoder)
> + return -ENODEV;
> +
> + ret = drm_modeset_lock_single_interruptible(&dev->mode_config.connection_mutex);
> + if (ret)
> + return ret;
> +
> + crtc = connector->state->crtc;
> + if (connector->status != connector_status_connected || !crtc) {
> + ret = -ENODEV;
> + goto out;
> + }
> +
> + crtc_state = to_intel_crtc_state(crtc->state);
> + seq_printf(m, "DSC_Output_Format: %s\n", intel_output_format_name(crtc_state->output_format));
> +
> +out: drm_modeset_unlock(&dev->mode_config.connection_mutex);
> +
> + return ret;
> +}
> +
> +static ssize_t i915_dsc_output_format_write(struct file *file,
> + const char __user *ubuf,
> + size_t len, loff_t *offp)
> +{
> + struct drm_connector *connector =
> + ((struct seq_file *)file->private_data)->private;
> + struct intel_encoder *encoder = intel_attached_encoder(to_intel_connector(connector));
> + struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
> + int dsc_output_format = 0;
> + int ret;
> +
> + ret = kstrtoint_from_user(ubuf, len, 0, &dsc_output_format);
> + if (ret < 0)
> + return ret;
> +
> + intel_dp->force_dsc_output_format = dsc_output_format;
> + *offp += len;
> +
> + return len;
> +}
> +
> +static int i915_dsc_output_format_open(struct inode *inode,
> + struct file *file)
> +{
> + return single_open(file, i915_dsc_output_format_show, inode->i_private);
> +}
> +
> +static const struct file_operations i915_dsc_output_format_fops = {
> + .owner = THIS_MODULE,
> + .open = i915_dsc_output_format_open,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .release = single_release,
> + .write = i915_dsc_output_format_write
> +};
> +
> /*
> * Returns the Current CRTC's bpc.
> * Example usage: cat /sys/kernel/debug/dri/0/crtc-0/i915_current_bpc
> @@ -1966,6 +2040,9 @@ void intel_connector_debugfs_add(struct intel_connector *intel_connector)
>
> debugfs_create_file("i915_dsc_bpc", 0644, root,
> connector, &i915_dsc_bpc_fops);
> +
> + debugfs_create_file("i915_dsc_output_format", 0644, root,
> + connector, &i915_dsc_output_format_fops);
> }
>
> if (connector->connector_type == DRM_MODE_CONNECTOR_DSI ||
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index 9ccae7a46020..9f7951b49c42 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1743,6 +1743,7 @@ struct intel_dp {
>
> /* Display stream compression testing */
> bool force_dsc_en;
> + int force_dsc_output_format;
> int force_dsc_bpc;
>
> bool hobl_failed;
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 4a5f7c476305..fccb69a58111 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -76,6 +76,7 @@
> #include "intel_tc.h"
> #include "intel_vdsc.h"
> #include "intel_vrr.h"
> +#include "intel_crtc_state_dump.h"
>
> /* DP DSC throughput values used for slice count calculations KPixels/s */
> #define DP_DSC_PEAK_PIXEL_RATE 2720000
> @@ -810,6 +811,9 @@ intel_dp_output_format(struct intel_connector *connector,
> {
> struct intel_dp *intel_dp = intel_attached_dp(connector);
>
> + if (intel_dp->force_dsc_output_format)
> + return intel_dp->force_dsc_output_format;
> +
> if (!connector->base.ycbcr_420_allowed || !ycbcr_420_output)
> return INTEL_OUTPUT_FORMAT_RGB;
--
Jani Nikula, Intel Open Source Graphics Center
More information about the Intel-gfx
mailing list