[Intel-gfx] [PATCH v3 01/22] drm/i915: Populate dig_port->connected() before connector init
Jani Nikula
jani.nikula at linux.intel.com
Tue Feb 28 17:58:30 UTC 2023
On Wed, 22 Feb 2023, Ville Syrjala <ville.syrjala at linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> We'll need dig_port->connected() to be there for a HPD live
> state check during eDP connector probing. Reorder intel_ddi_init()
> accordingly. g4x_dp_init() is already fine.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Reviewed-by: Jani Nikula <jani.nikula at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_ddi.c | 40 ++++++++++++------------
> 1 file changed, 20 insertions(+), 20 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index e5979427b38b..40b5c93f9223 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -4503,8 +4503,28 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
>
> drm_WARN_ON(&dev_priv->drm, port > PORT_I);
> dig_port->ddi_io_power_domain = intel_display_power_ddi_io_domain(dev_priv, port);
>
> + if (DISPLAY_VER(dev_priv) >= 11) {
> + if (intel_phy_is_tc(dev_priv, phy))
> + dig_port->connected = intel_tc_port_connected;
> + else
> + dig_port->connected = lpt_digital_port_connected;
> + } else if (DISPLAY_VER(dev_priv) >= 8) {
> + if (port == PORT_A || IS_GEMINILAKE(dev_priv) ||
> + IS_BROXTON(dev_priv))
> + dig_port->connected = bdw_digital_port_connected;
> + else
> + dig_port->connected = lpt_digital_port_connected;
> + } else {
> + if (port == PORT_A)
> + dig_port->connected = hsw_digital_port_connected;
> + else
> + dig_port->connected = lpt_digital_port_connected;
> + }
> +
> + intel_infoframe_init(dig_port);
> +
> if (init_dp) {
> if (!intel_ddi_init_dp_connector(dig_port))
> goto err;
>
> @@ -4520,28 +4540,8 @@ void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
> if (!intel_ddi_init_hdmi_connector(dig_port))
> goto err;
> }
>
> - if (DISPLAY_VER(dev_priv) >= 11) {
> - if (intel_phy_is_tc(dev_priv, phy))
> - dig_port->connected = intel_tc_port_connected;
> - else
> - dig_port->connected = lpt_digital_port_connected;
> - } else if (DISPLAY_VER(dev_priv) >= 8) {
> - if (port == PORT_A || IS_GEMINILAKE(dev_priv) ||
> - IS_BROXTON(dev_priv))
> - dig_port->connected = bdw_digital_port_connected;
> - else
> - dig_port->connected = lpt_digital_port_connected;
> - } else {
> - if (port == PORT_A)
> - dig_port->connected = hsw_digital_port_connected;
> - else
> - dig_port->connected = lpt_digital_port_connected;
> - }
> -
> - intel_infoframe_init(dig_port);
> -
> return;
>
> err:
> drm_encoder_cleanup(&encoder->base);
--
Jani Nikula, Intel Open Source Graphics Center
More information about the Intel-gfx
mailing list