[Intel-gfx] [PATCH v3 2/2] drm/i915/display: Prune Interlace modes for Display >=12

[Jani Nikula]

On Thu, 05 Jan 2023, Ankit Nautiyal <ankit.k.nautiyal at intel.com> wrote:
> Defeature Display Interlace support.
> Support for interlace modes is removed from Gen 12 onwards.
> Pruning the interlace modes for HDMI for Display >=12.
> Bspec: 50490
>
> v2: Add check for both DP and HDMI. (Ville)
> Get rid of redundant check for interlace mode in modevalid. (Ville)
>
> v3: Simplify the condition to avoid interlace modes. (Jani)
>
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>

Reviewed-by: Jani Nikula <jani.nikula at intel.com>


> ---
>  drivers/gpu/drm/i915/display/intel_dp.c   | 4 ++--
>  drivers/gpu/drm/i915/display/intel_hdmi.c | 8 +++++++-
>  2 files changed, 9 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index a9ebc73d3b87..c03a11173dc8 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2092,7 +2092,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return -EINVAL;
>  
> -	if (HAS_GMCH(dev_priv) &&
> +	if (!connector->base.interlace_allowed &&
>  	    adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
>  		return -EINVAL;
>  
> @@ -5435,7 +5435,7 @@ intel_dp_init_connector(struct intel_digital_port *dig_port,
>  	drm_connector_init(dev, connector, &intel_dp_connector_funcs, type);
>  	drm_connector_helper_add(connector, &intel_dp_connector_helper_funcs);
>  
> -	if (!HAS_GMCH(dev_priv))
> +	if (!HAS_GMCH(dev_priv) && DISPLAY_VER(dev_priv) < 12)
>  		connector->interlace_allowed = true;
>  
>  	intel_connector->polled = DRM_CONNECTOR_POLL_HPD;
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index b4323303baba..6a2ee342eab5 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -2255,6 +2255,10 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return -EINVAL;
>  
> +	if (!connector->interlace_allowed &&
> +	    adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
> +		return -EINVAL;
> +
>  	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  	pipe_config->has_hdmi_sink =
>  		intel_has_hdmi_sink(intel_hdmi, conn_state) &&
> @@ -2956,7 +2960,9 @@ void intel_hdmi_init_connector(struct intel_digital_port *dig_port,
>  				    ddc);
>  	drm_connector_helper_add(connector, &intel_hdmi_connector_helper_funcs);
>  
> -	connector->interlace_allowed = true;
> +	if (DISPLAY_VER(dev_priv) < 12)
> +		connector->interlace_allowed = true;
> +
>  	connector->stereo_allowed = true;
>  
>  	if (DISPLAY_VER(dev_priv) >= 10)

-- 
Jani Nikula, Intel Open Source Graphics Center