[Intel-gfx] [PATCH v2 6/8] drm/i915/guc: Update GuC messages in intel_guc_log.c

John Harrison john.c.harrison at intel.com
Sat Jan 28 01:20:30 UTC 2023


On 1/24/2023 09:05, Michal Wajdeczko wrote:
> Use new macros to have common prefix that also include GT#.
>
> v2: drop redundant GuC strings, minor improvements
>
> Signed-off-by: Michal Wajdeczko <michal.wajdeczko at intel.com>
> Cc: John Harrison <John.C.Harrison at Intel.com>
> ---
>   drivers/gpu/drm/i915/gt/uc/intel_guc_log.c | 37 ++++++++++++----------
>   1 file changed, 20 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_log.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_log.c
> index 68331c538b0a..290bb996b667 100644
> --- a/drivers/gpu/drm/i915/gt/uc/intel_guc_log.c
> +++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_log.c
> @@ -12,6 +12,7 @@
>   #include "i915_memcpy.h"
>   #include "intel_guc_capture.h"
>   #include "intel_guc_log.h"
> +#include "intel_guc_print.h"
>   
>   #if defined(CONFIG_DRM_I915_DEBUG_GUC)
>   #define GUC_LOG_DEFAULT_CRASH_BUFFER_SIZE	SZ_2M
> @@ -39,7 +40,6 @@ struct guc_log_section {
>   static void _guc_log_init_sizes(struct intel_guc_log *log)
>   {
>   	struct intel_guc *guc = log_to_guc(log);
> -	struct drm_i915_private *i915 = guc_to_gt(guc)->i915;
>   	static const struct guc_log_section sections[GUC_LOG_SECTIONS_LIMIT] = {
>   		{
>   			GUC_LOG_CRASH_MASK >> GUC_LOG_CRASH_SHIFT,
> @@ -82,12 +82,12 @@ static void _guc_log_init_sizes(struct intel_guc_log *log)
>   		}
>   
>   		if (!IS_ALIGNED(log->sizes[i].bytes, log->sizes[i].units))
> -			drm_err(&i915->drm, "Mis-aligned GuC log %s size: 0x%X vs 0x%X!",
> +			guc_err(guc, "Mis-aligned log %s size: 0x%X vs 0x%X!\n",
>   				sections[i].name, log->sizes[i].bytes, log->sizes[i].units);
>   		log->sizes[i].count = log->sizes[i].bytes / log->sizes[i].units;
>   
>   		if (!log->sizes[i].count) {
> -			drm_err(&i915->drm, "Zero GuC log %s size!", sections[i].name);
> +			guc_err(guc, "Zero log %s size!\n", sections[i].name);
>   		} else {
>   			/* Size is +1 unit */
>   			log->sizes[i].count--;
> @@ -95,15 +95,17 @@ static void _guc_log_init_sizes(struct intel_guc_log *log)
>   
>   		/* Clip to field size */
>   		if (log->sizes[i].count > sections[i].max) {
> -			drm_err(&i915->drm, "GuC log %s size too large: %d vs %d!",
> +			guc_err(guc, "log %s size too large: %d vs %d!\n",
>   				sections[i].name, log->sizes[i].count + 1, sections[i].max + 1);
>   			log->sizes[i].count = sections[i].max;
>   		}
>   	}
>   
>   	if (log->sizes[GUC_LOG_SECTIONS_CRASH].units != log->sizes[GUC_LOG_SECTIONS_DEBUG].units) {
> -		drm_err(&i915->drm, "Unit mis-match for GuC log crash and debug sections: %d vs %d!",
> +		guc_err(guc, "Unit mis-match between log sections: %s = %d vs %s = %d!\n",
> +			sections[GUC_LOG_SECTIONS_CRASH].name,
>   			log->sizes[GUC_LOG_SECTIONS_CRASH].units,
> +			sections[GUC_LOG_SECTIONS_DEBUG].name,
Sorry, didn't get to reply to your comment in time. This can only be a 
mis-match between crash and debug. And the 'name' field is just a string 
version of the array index enum. So I would have just gone with "Unit 
mismatch for crash and debug sections: %d vs %d".


>   			log->sizes[GUC_LOG_SECTIONS_DEBUG].units);
>   		log->sizes[GUC_LOG_SECTIONS_CRASH].units = log->sizes[GUC_LOG_SECTIONS_DEBUG].units;
>   		log->sizes[GUC_LOG_SECTIONS_CRASH].count = 0;
> @@ -374,6 +376,7 @@ size_t intel_guc_get_log_buffer_offset(struct intel_guc_log *log,
>   
>   static void _guc_log_copy_debuglogs_for_relay(struct intel_guc_log *log)
>   {
> +	struct intel_guc *guc = log_to_guc(log);
>   	unsigned int buffer_size, read_offset, write_offset, bytes_to_copy, full_cnt;
>   	struct guc_log_buffer_state *log_buf_state, *log_buf_snapshot_state;
>   	struct guc_log_buffer_state log_buf_state_local;
> @@ -383,7 +386,7 @@ static void _guc_log_copy_debuglogs_for_relay(struct intel_guc_log *log)
>   
>   	mutex_lock(&log->relay.lock);
>   
> -	if (WARN_ON(!intel_guc_log_relay_created(log)))
> +	if (guc_WARN_ON(guc, !intel_guc_log_relay_created(log)))
>   		goto out_unlock;
>   
>   	/* Get the pointer to shared GuC log buffer */
> @@ -398,7 +401,7 @@ static void _guc_log_copy_debuglogs_for_relay(struct intel_guc_log *log)
>   		 * Used rate limited to avoid deluge of messages, logs might be
>   		 * getting consumed by User at a slow rate.
>   		 */
> -		DRM_ERROR_RATELIMITED("no sub-buffer to copy general logs\n");
> +		guc_err_ratelimited(guc, "no sub-buffer to copy general logs\n");
>   		log->relay.full_count++;
>   
>   		goto out_unlock;
> @@ -451,7 +454,7 @@ static void _guc_log_copy_debuglogs_for_relay(struct intel_guc_log *log)
>   			write_offset = buffer_size;
>   		} else if (unlikely((read_offset > buffer_size) ||
>   				    (write_offset > buffer_size))) {
> -			DRM_ERROR("invalid log buffer state\n");
> +			guc_err(guc, "invalid log buffer state\n");
>   			/* copy whole buffer as offsets are unreliable */
>   			read_offset = 0;
>   			write_offset = buffer_size;
> @@ -547,7 +550,7 @@ static int guc_log_relay_create(struct intel_guc_log *log)
>   					subbuf_size, n_subbufs,
>   					&relay_callbacks, dev_priv);
>   	if (!guc_log_relay_chan) {
> -		DRM_ERROR("Couldn't create relay chan for GuC logging\n");
> +		guc_err(guc, "Couldn't create relay channel for logging\n");
>   
>   		ret = -ENOMEM;
>   		return ret;
> @@ -596,7 +599,7 @@ static u32 __get_default_log_level(struct intel_guc_log *log)
>   	}
>   
>   	if (i915->params.guc_log_level > GUC_LOG_LEVEL_MAX) {
> -		DRM_WARN("Incompatible option detected: %s=%d, %s!\n",
> +		guc_warn(guc, "Incompatible option detected: %s=%d, %s!\n",
>   			 "guc_log_level", i915->params.guc_log_level,
>   			 "verbosity too high");
Missed this in the previous patch set but this is a weird warning! Why 
have fixed strings printed via %s?! Seems like it would be better to have:
     guc_warn(guc, "Log verbosity param out of range: %d vs %d", 
i915->params.guc_log_level, GUC_LOG_LEVEL_MAX);

John.

>   		return (IS_ENABLED(CONFIG_DRM_I915_DEBUG) ||
> @@ -641,15 +644,15 @@ int intel_guc_log_create(struct intel_guc_log *log)
>   	log->buf_addr = vaddr;
>   
>   	log->level = __get_default_log_level(log);
> -	DRM_DEBUG_DRIVER("guc_log_level=%d (%s, verbose:%s, verbosity:%d)\n",
> -			 log->level, str_enabled_disabled(log->level),
> -			 str_yes_no(GUC_LOG_LEVEL_IS_VERBOSE(log->level)),
> -			 GUC_LOG_LEVEL_TO_VERBOSITY(log->level));
> +	guc_dbg(guc, "guc_log_level=%d (%s, verbose:%s, verbosity:%d)\n",
> +		log->level, str_enabled_disabled(log->level),
> +		str_yes_no(GUC_LOG_LEVEL_IS_VERBOSE(log->level)),
> +		GUC_LOG_LEVEL_TO_VERBOSITY(log->level));
>   
>   	return 0;
>   
>   err:
> -	DRM_ERROR("Failed to allocate or map GuC log buffer. %d\n", ret);
> +	guc_err(guc, "Failed to allocate or map log buffer %pe\n", ERR_PTR(ret));
>   	return ret;
>   }
>   
> @@ -687,7 +690,7 @@ int intel_guc_log_set_level(struct intel_guc_log *log, u32 level)
>   					     GUC_LOG_LEVEL_IS_ENABLED(level),
>   					     GUC_LOG_LEVEL_TO_VERBOSITY(level));
>   	if (ret) {
> -		DRM_DEBUG_DRIVER("guc_log_control action failed %d\n", ret);
> +		guc_dbg(guc, "guc_log_control action failed %pe\n", ERR_PTR(ret));
>   		goto out_unlock;
>   	}
>   
> @@ -905,7 +908,7 @@ int intel_guc_log_dump(struct intel_guc_log *log, struct drm_printer *p,
>   
>   	map = i915_gem_object_pin_map_unlocked(obj, I915_MAP_WC);
>   	if (IS_ERR(map)) {
> -		DRM_DEBUG("Failed to pin object\n");
> +		guc_dbg(guc, "Failed to pin log object: %pe\n", map);
>   		drm_puts(p, "(log data unaccessible)\n");
>   		free_page((unsigned long)page);
>   		return PTR_ERR(map);



More information about the Intel-gfx mailing list