[Intel-gfx] [PATCH v7 8/9] vfio/pci: Extend VFIO_DEVICE_GET_PCI_HOT_RESET_INFO for vfio device cdev
Alex Williamson
alex.williamson at redhat.com
Thu Jun 8 22:26:59 UTC 2023
On Fri, 2 Jun 2023 05:15:14 -0700
Yi Liu <yi.l.liu at intel.com> wrote:
> This allows VFIO_DEVICE_GET_PCI_HOT_RESET_INFO ioctl use the iommufd_ctx
> of the cdev device to check the ownership of the other affected devices.
>
> When VFIO_DEVICE_GET_PCI_HOT_RESET_INFO is called on an IOMMUFD managed
> device, the new flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is reported to indicate
> the values returned are IOMMUFD devids rather than group IDs as used when
> accessing vfio devices through the conventional vfio group interface.
> Additionally the flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED will be reported
> in this mode if all of the devices affected by the hot-reset are owned by
> either virtue of being directly bound to the same iommufd context as the
> calling device, or implicitly owned via a shared IOMMU group.
>
> Suggested-by: Jason Gunthorpe <jgg at nvidia.com>
> Suggested-by: Alex Williamson <alex.williamson at redhat.com>
> Signed-off-by: Yi Liu <yi.l.liu at intel.com>
> ---
> drivers/vfio/iommufd.c | 49 +++++++++++++++++++++++++++++++
> drivers/vfio/pci/vfio_pci_core.c | 47 +++++++++++++++++++++++++-----
> include/linux/vfio.h | 16 ++++++++++
> include/uapi/linux/vfio.h | 50 +++++++++++++++++++++++++++++++-
> 4 files changed, 154 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/vfio/iommufd.c b/drivers/vfio/iommufd.c
> index 88b00c501015..a04f3a493437 100644
> --- a/drivers/vfio/iommufd.c
> +++ b/drivers/vfio/iommufd.c
> @@ -66,6 +66,55 @@ void vfio_iommufd_unbind(struct vfio_device *vdev)
> vdev->ops->unbind_iommufd(vdev);
> }
>
> +struct iommufd_ctx *vfio_iommufd_device_ictx(struct vfio_device *vdev)
> +{
> + if (vdev->iommufd_device)
> + return iommufd_device_to_ictx(vdev->iommufd_device);
> + return NULL;
> +}
> +EXPORT_SYMBOL_GPL(vfio_iommufd_device_ictx);
> +
> +static int vfio_iommufd_device_id(struct vfio_device *vdev)
> +{
> + if (vdev->iommufd_device)
> + return iommufd_device_to_id(vdev->iommufd_device);
> + return -EINVAL;
If this is actually reachable, it allows us to return -EINVAL as a
devid in the reset-info ioctl, which is not a defined value. Should
this return VFIO_PCI_DEVID_NOT_OWNED or do you want to catch the errno
value in the caller? Thanks,
Alex
> +}
> +
> +/*
> + * Return devid for a device which is affected by hot-reset.
> + * - valid devid > 0 for the device that is bound to the input
> + * iommufd_ctx.
> + * - devid == VFIO_PCI_DEVID_OWNED for the device that has not
> + * been bound to any iommufd_ctx but other device within its
> + * group has been bound to the input iommufd_ctx.
> + * - devid == VFIO_PCI_DEVID_NOT_OWNED for others. e.g. device
> + * is bound to other iommufd_ctx etc.
> + */
> +int vfio_iommufd_device_hot_reset_devid(struct vfio_device *vdev,
> + struct iommufd_ctx *ictx)
> +{
> + struct iommu_group *group;
> + int devid;
> +
> + if (vfio_iommufd_device_ictx(vdev) == ictx)
> + return vfio_iommufd_device_id(vdev);
> +
> + group = iommu_group_get(vdev->dev);
> + if (!group)
> + return VFIO_PCI_DEVID_NOT_OWNED;
> +
> + if (iommufd_ctx_has_group(ictx, group))
> + devid = VFIO_PCI_DEVID_OWNED;
> + else
> + devid = VFIO_PCI_DEVID_NOT_OWNED;
> +
> + iommu_group_put(group);
> +
> + return devid;
> +}
> +EXPORT_SYMBOL_GPL(vfio_iommufd_device_hot_reset_devid);
> +
> /*
> * The physical standard ops mean that the iommufd_device is bound to the
> * physical device vdev->dev that was provided to vfio_init_group_dev(). Drivers
> diff --git a/drivers/vfio/pci/vfio_pci_core.c b/drivers/vfio/pci/vfio_pci_core.c
> index 3a2f67675036..a615a223cdef 100644
> --- a/drivers/vfio/pci/vfio_pci_core.c
> +++ b/drivers/vfio/pci/vfio_pci_core.c
> @@ -27,6 +27,7 @@
> #include <linux/vgaarb.h>
> #include <linux/nospec.h>
> #include <linux/sched/mm.h>
> +#include <linux/iommufd.h>
> #if IS_ENABLED(CONFIG_EEH)
> #include <asm/eeh.h>
> #endif
> @@ -776,26 +777,49 @@ struct vfio_pci_fill_info {
> int max;
> int cur;
> struct vfio_pci_dependent_device *devices;
> + struct vfio_device *vdev;
> + u32 flags;
> };
>
> static int vfio_pci_fill_devs(struct pci_dev *pdev, void *data)
> {
> struct vfio_pci_fill_info *fill = data;
> - struct iommu_group *iommu_group;
>
> if (fill->cur == fill->max)
> return -EAGAIN; /* Something changed, try again */
>
> - iommu_group = iommu_group_get(&pdev->dev);
> - if (!iommu_group)
> - return -EPERM; /* Cannot reset non-isolated devices */
> + if (fill->flags & VFIO_PCI_HOT_RESET_FLAG_DEV_ID) {
> + struct iommufd_ctx *iommufd = vfio_iommufd_device_ictx(fill->vdev);
> + struct vfio_device_set *dev_set = fill->vdev->dev_set;
> + struct vfio_device *vdev;
>
> - fill->devices[fill->cur].group_id = iommu_group_id(iommu_group);
> + /*
> + * hot-reset requires all affected devices be represented in
> + * the dev_set.
> + */
> + vdev = vfio_find_device_in_devset(dev_set, &pdev->dev);
> + if (!vdev)
> + fill->devices[fill->cur].devid = VFIO_PCI_DEVID_NOT_OWNED;
> + else
> + fill->devices[fill->cur].devid =
> + vfio_iommufd_device_hot_reset_devid(vdev, iommufd);
> + /* If devid is VFIO_PCI_DEVID_NOT_OWNED, clear owned flag. */
> + if (fill->devices[fill->cur].devid == VFIO_PCI_DEVID_NOT_OWNED)
> + fill->flags &= ~VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED;
> + } else {
> + struct iommu_group *iommu_group;
> +
> + iommu_group = iommu_group_get(&pdev->dev);
> + if (!iommu_group)
> + return -EPERM; /* Cannot reset non-isolated devices */
> +
> + fill->devices[fill->cur].group_id = iommu_group_id(iommu_group);
> + iommu_group_put(iommu_group);
> + }
> fill->devices[fill->cur].segment = pci_domain_nr(pdev->bus);
> fill->devices[fill->cur].bus = pdev->bus->number;
> fill->devices[fill->cur].devfn = pdev->devfn;
> fill->cur++;
> - iommu_group_put(iommu_group);
> return 0;
> }
>
> @@ -1229,17 +1253,26 @@ static int vfio_pci_ioctl_get_pci_hot_reset_info(
> return -ENOMEM;
>
> fill.devices = devices;
> + fill.vdev = &vdev->vdev;
> +
> + if (vfio_device_cdev_opened(&vdev->vdev))
> + fill.flags |= VFIO_PCI_HOT_RESET_FLAG_DEV_ID |
> + VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED;
>
> + mutex_lock(&vdev->vdev.dev_set->lock);
> ret = vfio_pci_for_each_slot_or_bus(vdev->pdev, vfio_pci_fill_devs,
> &fill, slot);
> + mutex_unlock(&vdev->vdev.dev_set->lock);
>
> /*
> * If a device was removed between counting and filling, we may come up
> * short of fill.max. If a device was added, we'll have a return of
> * -EAGAIN above.
> */
> - if (!ret)
> + if (!ret) {
> hdr.count = fill.cur;
> + hdr.flags = fill.flags;
> + }
>
> reset_info_exit:
> if (copy_to_user(arg, &hdr, minsz))
> diff --git a/include/linux/vfio.h b/include/linux/vfio.h
> index ee120d2d530b..382a7b119c7c 100644
> --- a/include/linux/vfio.h
> +++ b/include/linux/vfio.h
> @@ -114,6 +114,9 @@ struct vfio_device_ops {
> };
>
> #if IS_ENABLED(CONFIG_IOMMUFD)
> +struct iommufd_ctx *vfio_iommufd_device_ictx(struct vfio_device *vdev);
> +int vfio_iommufd_device_hot_reset_devid(struct vfio_device *vdev,
> + struct iommufd_ctx *ictx);
> int vfio_iommufd_physical_bind(struct vfio_device *vdev,
> struct iommufd_ctx *ictx, u32 *out_device_id);
> void vfio_iommufd_physical_unbind(struct vfio_device *vdev);
> @@ -123,6 +126,19 @@ int vfio_iommufd_emulated_bind(struct vfio_device *vdev,
> void vfio_iommufd_emulated_unbind(struct vfio_device *vdev);
> int vfio_iommufd_emulated_attach_ioas(struct vfio_device *vdev, u32 *pt_id);
> #else
> +static inline struct iommufd_ctx *
> +vfio_iommufd_device_ictx(struct vfio_device *vdev)
> +{
> + return NULL;
> +}
> +
> +static inline int
> +vfio_iommufd_device_hot_reset_devid(struct vfio_device *vdev,
> + struct iommufd_ctx *ictx)
> +{
> + return VFIO_PCI_DEVID_NOT_OWNED;
> +}
> +
> #define vfio_iommufd_physical_bind \
> ((int (*)(struct vfio_device *vdev, struct iommufd_ctx *ictx, \
> u32 *out_device_id)) NULL)
> diff --git a/include/uapi/linux/vfio.h b/include/uapi/linux/vfio.h
> index 0552e8dcf0cb..70cc31e6b1ce 100644
> --- a/include/uapi/linux/vfio.h
> +++ b/include/uapi/linux/vfio.h
> @@ -650,11 +650,57 @@ enum {
> * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 12,
> * struct vfio_pci_hot_reset_info)
> *
> + * This command is used to query the affected devices in the hot reset for
> + * a given device.
> + *
> + * This command always reports the segment, bus, and devfn information for
> + * each affected device, and selectively reports the group_id or devid per
> + * the way how the calling device is opened.
> + *
> + * - If the calling device is opened via the traditional group/container
> + * API, group_id is reported. User should check if it has owned all
> + * the affected devices and provides a set of group fds to prove the
> + * ownership in VFIO_DEVICE_PCI_HOT_RESET ioctl.
> + *
> + * - If the calling device is opened as a cdev, devid is reported.
> + * Flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is set to indicate this
> + * data type. All the affected devices should be represented in
> + * the dev_set, ex. bound to a vfio driver, and also be owned by
> + * this interface which is determined by the following conditions:
> + * 1) Has a valid devid within the iommufd_ctx of the calling device.
> + * Ownership cannot be determined across separate iommufd_ctx and
> + * the cdev calling conventions do not support a proof-of-ownership
> + * model as provided in the legacy group interface. In this case
> + * valid devid with value greater than zero is provided in the return
> + * structure.
> + * 2) Does not have a valid devid within the iommufd_ctx of the calling
> + * device, but belongs to the same IOMMU group as the calling device
> + * or another opened device that has a valid devid within the
> + * iommufd_ctx of the calling device. This provides implicit ownership
> + * for devices within the same DMA isolation context. In this case
> + * the devid value of VFIO_PCI_DEVID_OWNED is provided in the return
> + * structure.
> + *
> + * A devid value of VFIO_PCI_DEVID_NOT_OWNED is provided in the return
> + * structure for affected devices where device is NOT represented in the
> + * dev_set or ownership is not available. Such devices prevent the use
> + * of VFIO_DEVICE_PCI_HOT_RESET ioctl outside of the proof-of-ownership
> + * calling conventions (ie. via legacy group accessed devices). Flag
> + * VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED would be set when all the
> + * affected devices are represented in the dev_set and also owned by
> + * the user. This flag is available only when
> + * flag VFIO_PCI_HOT_RESET_FLAG_DEV_ID is set, otherwise reserved.
> + *
> * Return: 0 on success, -errno on failure:
> * -enospc = insufficient buffer, -enodev = unsupported for device.
> */
> struct vfio_pci_dependent_device {
> - __u32 group_id;
> + union {
> + __u32 group_id;
> + __u32 devid;
> +#define VFIO_PCI_DEVID_OWNED 0
> +#define VFIO_PCI_DEVID_NOT_OWNED -1
> + };
> __u16 segment;
> __u8 bus;
> __u8 devfn; /* Use PCI_SLOT/PCI_FUNC */
> @@ -663,6 +709,8 @@ struct vfio_pci_dependent_device {
> struct vfio_pci_hot_reset_info {
> __u32 argsz;
> __u32 flags;
> +#define VFIO_PCI_HOT_RESET_FLAG_DEV_ID (1 << 0)
> +#define VFIO_PCI_HOT_RESET_FLAG_DEV_ID_OWNED (1 << 1)
> __u32 count;
> struct vfio_pci_dependent_device devices[];
> };
More information about the Intel-gfx
mailing list