[Intel-gfx] [RFC 0/3] Get optimal audio frequency and channels

Golani, Mitulkumar Ajitkumar mitulkumar.ajitkumar.golani at intel.com
Fri Jun 30 04:46:44 UTC 2023


Hi @Jani Nikula

> -----Original Message-----
> From: Jani Nikula <jani.nikula at linux.intel.com>
> Sent: 29 June 2023 13:43
> To: Golani, Mitulkumar Ajitkumar <mitulkumar.ajitkumar.golani at intel.com>;
> intel-gfx at lists.freedesktop.org
> Subject: Re: [Intel-gfx] [RFC 0/3] Get optimal audio frequency and channels
> 
> On Wed, 28 Jun 2023, Mitul Golani <mitulkumar.ajitkumar.golani at intel.com>
> wrote:
> > Currently we do not check if there is enough bandwidth for audio, and
> > what channels and freq it can really support.
> > Also sometimes there can be HW constraints e.g. GLK where audio
> > channels supported are only 2.
> 
> Why are you sending this so many times? What are the changes between the
> versions? People lose track.
> 
> BR,
> Jani.

Due to Indentations got off while fixing one of the comments from different editor. Check patch would have failed. 

>From next revision onwards, I will add revision tag to cover letter for better tracking.
Please review latest revision in this patch series.

Thanks,
Mitul

> 
> >
> > https://patchwork.freedesktop.org/series/107647/
> >
> > Obtain the optimal audio rate and channel based on available display
> > timing constraints.
> >
> > This can be achieved by:
> > - Retrieve the supported channel and rate information from SADs
> > - Adding audio-related config parameters in the CRTC state, such as
> > audio support, rate, and channel.
> > - Initializing the audio config parameters with the maximum supported
> > rate and channel by the audio source.
> > - Computing the SADs based on the audio source's capabilities.
> >
> > Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani at intel.com>
> >
> > Mitul Golani (3):
> >   drm/i915: Add has_audio to separate audio parameter in crtc_state
> >   drm/i915/display: Configure and initialize HDMI audio capabilities
> >   drm/i915/display: Add wrapper to Compute SAD
> >
> >  drivers/gpu/drm/i915/display/g4x_dp.c         |   4 +-
> >  drivers/gpu/drm/i915/display/g4x_hdmi.c       |  16 +--
> >  drivers/gpu/drm/i915/display/intel_audio.c    | 115 +++++++++++++++++-
> >  drivers/gpu/drm/i915/display/intel_cdclk.c    |   6 +-
> >  .../drm/i915/display/intel_crtc_state_dump.c  |   4 +-
> >  drivers/gpu/drm/i915/display/intel_ddi.c      |   2 +-
> >  drivers/gpu/drm/i915/display/intel_display.c  |   4 +-
> >  .../drm/i915/display/intel_display_types.h    |  12 +-
> >  drivers/gpu/drm/i915/display/intel_dp.c       |   2 +-
> >  drivers/gpu/drm/i915/display/intel_dp_mst.c   |   2 +-
> >  drivers/gpu/drm/i915/display/intel_hdmi.c     |   2 +-
> >  drivers/gpu/drm/i915/display/intel_sdvo.c     |  10 +-
> >  12 files changed, 147 insertions(+), 32 deletions(-)
> 
> --
> Jani Nikula, Intel Open Source Graphics Center


More information about the Intel-gfx mailing list