[Intel-gfx] [PATCH v3 6/7] drm/i915/vdsc: Check slice design requirement
Suraj Kandpal
suraj.kandpal at intel.com
Thu Mar 9 06:28:54 UTC 2023
Add function to check if slice design requirements are being
met as defined in Bspec: 49259 in the section
Slice Design Requirement
--v7
-remove full bspec link [Jani]
-rename intel_dsc_check_slice_design_req to
intel_dsc_slice_dimensions_valid [Jani]
--v8
-fix condition to check if slice width and height are
of two
-fix minimum pixel in slice condition
--v10
-condition should be < rather then >= [Uma]
Cc: Uma Shankar <uma.shankar at intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal at intel.com>
Reviewed-by: Uma Shankar <uma.shankar at intel.com>
---
drivers/gpu/drm/i915/display/intel_vdsc.c | 32 +++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
index 0388efb49b92..8e787c13d26d 100644
--- a/drivers/gpu/drm/i915/display/intel_vdsc.c
+++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
@@ -448,6 +448,29 @@ calculate_rc_params(struct rc_parameters *rc,
}
}
+static int intel_dsc_slice_dimensions_valid(struct intel_crtc_state *pipe_config,
+ struct drm_dsc_config *vdsc_cfg)
+{
+ if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_RGB ||
+ pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) {
+ if (vdsc_cfg->slice_height > 4095)
+ return -EINVAL;
+ if (vdsc_cfg->slice_height * vdsc_cfg->slice_width < 15000)
+ return -EINVAL;
+ } else if (pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
+ if (vdsc_cfg->slice_width % 2)
+ return -EINVAL;
+ if (vdsc_cfg->slice_height % 2)
+ return -EINVAL;
+ if (vdsc_cfg->slice_height > 4094)
+ return -EINVAL;
+ if (vdsc_cfg->slice_height * vdsc_cfg->slice_width < 30000)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
int intel_dsc_compute_params(struct intel_crtc_state *pipe_config)
{
struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
@@ -456,11 +479,20 @@ int intel_dsc_compute_params(struct intel_crtc_state *pipe_config)
u16 compressed_bpp = pipe_config->dsc.compressed_bpp;
const struct rc_parameters *rc_params;
struct rc_parameters *rc = NULL;
+ int err;
u8 i = 0;
vdsc_cfg->pic_width = pipe_config->hw.adjusted_mode.crtc_hdisplay;
vdsc_cfg->slice_width = DIV_ROUND_UP(vdsc_cfg->pic_width,
pipe_config->dsc.slice_count);
+
+ err = intel_dsc_slice_dimensions_valid(pipe_config, vdsc_cfg);
+
+ if (err) {
+ drm_dbg_kms(&dev_priv->drm, "Slice dimension requirements not met\n");
+ return err;
+ }
+
/*
* According to DSC 1.2 specs if colorspace is YCbCr then convert_rgb is 0
* else 1
--
2.25.1
More information about the Intel-gfx
mailing list