[Intel-gfx] [PATCH v2 1/4] drm/i915: Update vblank timestamping stuff on seamless M/N change

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

When we change the M/N values seamlessly during a fastset we should
also update the vblank timestamping stuff to make sure the vblank
timestamp corrections/guesstimations come out exact.

Note that only crtc_clock and framedur_ns can actually end up
changing here during fastsets. Everything else we touch can
only change during full modesets.

Technically we should try to do this exactly at the start of
vblank, but that would require some kind of double buffering
scheme. Let's skip that for now and just update things right
after the commit has been submitted to the hardware. This
means the information will be properly up to date when the
vblank irq handler goes to work. Only if someone ends up
querying some vblanky stuff in between the commit and start
of vblank may we see a slight discrepancy.

Also this same problem really exists for the DRRS downclocking
stuff. But as that is supposed to be more or less transparent
to the user, and it only drops to low gear after a long delay
(1 sec currently) we probably don't have to worry about it.
Any time something is actively submitting updates DRRS will
remain in high gear and so the timestamping constants will
match the hardware state.

Reviewed-by: Jani Nikula <jani.nikula at intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani at intel.com>
Fixes: e6f29923c048 ("drm/i915: Allow M/N change during fastset on bdw+")
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_crtc.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_crtc.c b/drivers/gpu/drm/i915/display/intel_crtc.c
index b79a8834559f..41d381bbb57a 100644
--- a/drivers/gpu/drm/i915/display/intel_crtc.c
+++ b/drivers/gpu/drm/i915/display/intel_crtc.c
@@ -686,6 +686,14 @@ void intel_pipe_update_end(struct intel_crtc_state *new_crtc_state)
 	 */
 	intel_vrr_send_push(new_crtc_state);
 
+	/*
+	 * Seamless M/N update may need to update frame timings.
+	 *
+	 * FIXME Should be synchronized with the start of vblank somehow...
+	 */
+	if (new_crtc_state->seamless_m_n && intel_crtc_needs_fastset(new_crtc_state))
+		intel_crtc_update_active_timings(new_crtc_state);
+
 	local_irq_enable();
 
 	if (intel_vgpu_active(dev_priv))
-- 
2.39.2