[Intel-gfx] [PATCH v2 3/4] drm/i915: Relocate intel_crtc_update_active_timings()
Ville Syrjala
ville.syrjala at linux.intel.com
Fri Mar 10 23:58:27 UTC 2023
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Move intel_crtc_update_active_timings() into intel_vblank.c
where it more properly belongs.
Also do the s/dev_priv/i915/ modernization rename while at it.
Reviewed-by: Jani Nikula <jani.nikula at intel.com>
Reviewed-by: Mitul Golani <mitulkumar.ajitkumar.golani at intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_display.c | 84 ------------------
drivers/gpu/drm/i915/display/intel_display.h | 1 -
.../drm/i915/display/intel_modeset_setup.c | 1 +
drivers/gpu/drm/i915/display/intel_vblank.c | 85 +++++++++++++++++++
drivers/gpu/drm/i915/display/intel_vblank.h | 2 +
5 files changed, 88 insertions(+), 85 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 5bd51198281f..5bbcff38e02e 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -5905,90 +5905,6 @@ int intel_modeset_all_pipes(struct intel_atomic_state *state,
return 0;
}
-void intel_crtc_update_active_timings(const struct intel_crtc_state *crtc_state)
-{
- struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
- struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
- struct drm_display_mode adjusted_mode;
- int vmax_vblank_start = 0;
- unsigned long irqflags;
-
- drm_mode_init(&adjusted_mode, &crtc_state->hw.adjusted_mode);
-
- if (crtc_state->vrr.enable) {
- adjusted_mode.crtc_vtotal = crtc_state->vrr.vmax;
- adjusted_mode.crtc_vblank_end = crtc_state->vrr.vmax;
- adjusted_mode.crtc_vblank_start = intel_vrr_vmin_vblank_start(crtc_state);
- vmax_vblank_start = intel_vrr_vmax_vblank_start(crtc_state);
- }
-
- /*
- * Belts and suspenders locking to guarantee everyone sees 100%
- * consistent state during fastset seamless refresh rate changes.
- *
- * vblank_time_lock takes care of all drm_vblank.c stuff, and
- * uncore.lock takes care of __intel_get_crtc_scanline() which
- * may get called elsewhere as well.
- *
- * TODO maybe just protect everything (including
- * __intel_get_crtc_scanline()) with vblank_time_lock?
- * Need to audit everything to make sure it's safe.
- */
- spin_lock_irqsave(&dev_priv->drm.vblank_time_lock, irqflags);
- spin_lock(&dev_priv->uncore.lock);
-
- drm_calc_timestamping_constants(&crtc->base, &adjusted_mode);
-
- crtc->vmax_vblank_start = vmax_vblank_start;
-
- crtc->mode_flags = crtc_state->mode_flags;
-
- /*
- * The scanline counter increments at the leading edge of hsync.
- *
- * On most platforms it starts counting from vtotal-1 on the
- * first active line. That means the scanline counter value is
- * always one less than what we would expect. Ie. just after
- * start of vblank, which also occurs at start of hsync (on the
- * last active line), the scanline counter will read vblank_start-1.
- *
- * On gen2 the scanline counter starts counting from 1 instead
- * of vtotal-1, so we have to subtract one (or rather add vtotal-1
- * to keep the value positive), instead of adding one.
- *
- * On HSW+ the behaviour of the scanline counter depends on the output
- * type. For DP ports it behaves like most other platforms, but on HDMI
- * there's an extra 1 line difference. So we need to add two instead of
- * one to the value.
- *
- * On VLV/CHV DSI the scanline counter would appear to increment
- * approx. 1/3 of a scanline before start of vblank. Unfortunately
- * that means we can't tell whether we're in vblank or not while
- * we're on that particular line. We must still set scanline_offset
- * to 1 so that the vblank timestamps come out correct when we query
- * the scanline counter from within the vblank interrupt handler.
- * However if queried just before the start of vblank we'll get an
- * answer that's slightly in the future.
- */
- if (DISPLAY_VER(dev_priv) == 2) {
- int vtotal;
-
- vtotal = adjusted_mode.crtc_vtotal;
- if (adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
- vtotal /= 2;
-
- crtc->scanline_offset = vtotal - 1;
- } else if (HAS_DDI(dev_priv) &&
- intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
- crtc->scanline_offset = 2;
- } else {
- crtc->scanline_offset = 1;
- }
-
- spin_unlock(&dev_priv->uncore.lock);
- spin_unlock_irqrestore(&dev_priv->drm.vblank_time_lock, irqflags);
-}
-
/*
* This implements the workaround described in the "notes" section of the mode
* set sequence documentation. When going from no pipes or single pipe to
diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
index 50285fb4fcf5..ce97cb72f6d3 100644
--- a/drivers/gpu/drm/i915/display/intel_display.h
+++ b/drivers/gpu/drm/i915/display/intel_display.h
@@ -422,7 +422,6 @@ bool intel_crtc_get_pipe_config(struct intel_crtc_state *crtc_state);
bool intel_pipe_config_compare(const struct intel_crtc_state *current_config,
const struct intel_crtc_state *pipe_config,
bool fastset);
-void intel_crtc_update_active_timings(const struct intel_crtc_state *crtc_state);
void intel_plane_destroy(struct drm_plane *plane);
void i9xx_set_pipeconf(const struct intel_crtc_state *crtc_state);
diff --git a/drivers/gpu/drm/i915/display/intel_modeset_setup.c b/drivers/gpu/drm/i915/display/intel_modeset_setup.c
index 1d0c9e247c42..4558d02641fe 100644
--- a/drivers/gpu/drm/i915/display/intel_modeset_setup.c
+++ b/drivers/gpu/drm/i915/display/intel_modeset_setup.c
@@ -26,6 +26,7 @@
#include "intel_fifo_underrun.h"
#include "intel_modeset_setup.h"
#include "intel_pch_display.h"
+#include "intel_vblank.h"
#include "intel_wm.h"
#include "skl_watermark.h"
diff --git a/drivers/gpu/drm/i915/display/intel_vblank.c b/drivers/gpu/drm/i915/display/intel_vblank.c
index 571f5dda1e66..48bf3923af11 100644
--- a/drivers/gpu/drm/i915/display/intel_vblank.c
+++ b/drivers/gpu/drm/i915/display/intel_vblank.c
@@ -8,6 +8,7 @@
#include "intel_de.h"
#include "intel_display_types.h"
#include "intel_vblank.h"
+#include "intel_vrr.h"
/*
* This timing diagram depicts the video signal in and
@@ -439,3 +440,87 @@ void intel_wait_for_pipe_scanline_moving(struct intel_crtc *crtc)
{
wait_for_pipe_scanline_moving(crtc, true);
}
+
+void intel_crtc_update_active_timings(const struct intel_crtc_state *crtc_state)
+{
+ struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
+ struct drm_i915_private *i915 = to_i915(crtc->base.dev);
+ struct drm_display_mode adjusted_mode;
+ int vmax_vblank_start = 0;
+ unsigned long irqflags;
+
+ drm_mode_init(&adjusted_mode, &crtc_state->hw.adjusted_mode);
+
+ if (crtc_state->vrr.enable) {
+ adjusted_mode.crtc_vtotal = crtc_state->vrr.vmax;
+ adjusted_mode.crtc_vblank_end = crtc_state->vrr.vmax;
+ adjusted_mode.crtc_vblank_start = intel_vrr_vmin_vblank_start(crtc_state);
+ vmax_vblank_start = intel_vrr_vmax_vblank_start(crtc_state);
+ }
+
+ /*
+ * Belts and suspenders locking to guarantee everyone sees 100%
+ * consistent state during fastset seamless refresh rate changes.
+ *
+ * vblank_time_lock takes care of all drm_vblank.c stuff, and
+ * uncore.lock takes care of __intel_get_crtc_scanline() which
+ * may get called elsewhere as well.
+ *
+ * TODO maybe just protect everything (including
+ * __intel_get_crtc_scanline()) with vblank_time_lock?
+ * Need to audit everything to make sure it's safe.
+ */
+ spin_lock_irqsave(&i915->drm.vblank_time_lock, irqflags);
+ spin_lock(&i915->uncore.lock);
+
+ drm_calc_timestamping_constants(&crtc->base, &adjusted_mode);
+
+ crtc->vmax_vblank_start = vmax_vblank_start;
+
+ crtc->mode_flags = crtc_state->mode_flags;
+
+ /*
+ * The scanline counter increments at the leading edge of hsync.
+ *
+ * On most platforms it starts counting from vtotal-1 on the
+ * first active line. That means the scanline counter value is
+ * always one less than what we would expect. Ie. just after
+ * start of vblank, which also occurs at start of hsync (on the
+ * last active line), the scanline counter will read vblank_start-1.
+ *
+ * On gen2 the scanline counter starts counting from 1 instead
+ * of vtotal-1, so we have to subtract one (or rather add vtotal-1
+ * to keep the value positive), instead of adding one.
+ *
+ * On HSW+ the behaviour of the scanline counter depends on the output
+ * type. For DP ports it behaves like most other platforms, but on HDMI
+ * there's an extra 1 line difference. So we need to add two instead of
+ * one to the value.
+ *
+ * On VLV/CHV DSI the scanline counter would appear to increment
+ * approx. 1/3 of a scanline before start of vblank. Unfortunately
+ * that means we can't tell whether we're in vblank or not while
+ * we're on that particular line. We must still set scanline_offset
+ * to 1 so that the vblank timestamps come out correct when we query
+ * the scanline counter from within the vblank interrupt handler.
+ * However if queried just before the start of vblank we'll get an
+ * answer that's slightly in the future.
+ */
+ if (DISPLAY_VER(i915) == 2) {
+ int vtotal;
+
+ vtotal = adjusted_mode.crtc_vtotal;
+ if (adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
+ vtotal /= 2;
+
+ crtc->scanline_offset = vtotal - 1;
+ } else if (HAS_DDI(i915) &&
+ intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
+ crtc->scanline_offset = 2;
+ } else {
+ crtc->scanline_offset = 1;
+ }
+
+ spin_unlock(&i915->uncore.lock);
+ spin_unlock_irqrestore(&i915->drm.vblank_time_lock, irqflags);
+}
diff --git a/drivers/gpu/drm/i915/display/intel_vblank.h b/drivers/gpu/drm/i915/display/intel_vblank.h
index c9fea2c2a990..0884db7e76ae 100644
--- a/drivers/gpu/drm/i915/display/intel_vblank.h
+++ b/drivers/gpu/drm/i915/display/intel_vblank.h
@@ -11,6 +11,7 @@
struct drm_crtc;
struct intel_crtc;
+struct intel_crtc_state;
u32 i915_get_vblank_counter(struct drm_crtc *crtc);
u32 g4x_get_vblank_counter(struct drm_crtc *crtc);
@@ -19,5 +20,6 @@ bool intel_crtc_get_vblank_timestamp(struct drm_crtc *crtc, int *max_error,
int intel_get_crtc_scanline(struct intel_crtc *crtc);
void intel_wait_for_pipe_scanline_stopped(struct intel_crtc *crtc);
void intel_wait_for_pipe_scanline_moving(struct intel_crtc *crtc);
+void intel_crtc_update_active_timings(const struct intel_crtc_state *crtc_state);
#endif /* __INTEL_VBLANK_H__ */
--
2.39.2
More information about the Intel-gfx
mailing list