[Intel-gfx] [PATCH v11 04/11] drm/i915/display: Use sink_format instead of ycbcr420_output flag
Ville Syrjälä
ville.syrjala at linux.intel.com
Fri Mar 17 00:25:39 UTC 2023
On Tue, Mar 14, 2023 at 04:34:08PM +0530, Ankit Nautiyal wrote:
> Start passing the sink_format, to all functions that take a bool
> ycbcr420_output as parameter. This will make the functions generic,
> and will serve as a slight step towards 4:2:2 support later.
>
> v2: Rebased.
>
> Suggested-by: Ville Syrj_l_ <ville.syrjala at linux.intel.com>
> Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 33 +++++++--------
> drivers/gpu/drm/i915/display/intel_hdmi.c | 50 ++++++++++++-----------
> drivers/gpu/drm/i915/display/intel_hdmi.h | 5 ++-
> 3 files changed, 44 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index c31ec9c91c64..b49d113357e4 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -967,7 +967,8 @@ static int intel_dp_max_tmds_clock(struct intel_dp *intel_dp)
>
> static enum drm_mode_status
> intel_dp_tmds_clock_valid(struct intel_dp *intel_dp,
> - int clock, int bpc, bool ycbcr420_output,
> + int clock, int bpc,
> + enum intel_output_format sink_format,
> bool respect_downstream_limits)
> {
> int tmds_clock, min_tmds_clock, max_tmds_clock;
> @@ -975,7 +976,7 @@ intel_dp_tmds_clock_valid(struct intel_dp *intel_dp,
> if (!respect_downstream_limits)
> return MODE_OK;
>
> - tmds_clock = intel_hdmi_tmds_clock(clock, bpc, ycbcr420_output);
> + tmds_clock = intel_hdmi_tmds_clock(clock, bpc, sink_format);
>
> min_tmds_clock = intel_dp->dfp.min_tmds_clock;
> max_tmds_clock = intel_dp_max_tmds_clock(intel_dp);
> @@ -998,6 +999,7 @@ intel_dp_mode_valid_downstream(struct intel_connector *connector,
> const struct drm_display_info *info = &connector->base.display_info;
> enum drm_mode_status status;
> bool ycbcr_420_only;
> + enum intel_output_format sink_format;
>
> /* If PCON supports FRL MODE, check FRL bandwidth constraints */
> if (intel_dp->dfp.pcon_max_frl_bw) {
> @@ -1024,18 +1026,22 @@ intel_dp_mode_valid_downstream(struct intel_connector *connector,
>
> ycbcr_420_only = drm_mode_is_420_only(info, mode);
>
> + if (ycbcr_420_only && connector->base.ycbcr_420_allowed)
drm_mode_validate_ycbcr420() already checks for this combination.
So I don't think we should need to redo it here, and we didn't
before.
> + sink_format = INTEL_OUTPUT_FORMAT_YCBCR420;
> + else
> + sink_format = INTEL_OUTPUT_FORMAT_RGB;
> +
> /* Assume 8bpc for the DP++/HDMI/DVI TMDS clock check */
> status = intel_dp_tmds_clock_valid(intel_dp, target_clock,
> - 8, ycbcr_420_only, true);
> + 8, sink_format, true);
>
> if (status != MODE_OK) {
> - if (ycbcr_420_only ||
> - !connector->base.ycbcr_420_allowed ||
But here we do need to keep the allowed flag check since
drm_mode_validate_ycbcr420() doesn't care about 420_also() modes.
> + if (sink_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
> !drm_mode_is_420_also(info, mode))
> return status;
> -
> + sink_format = INTEL_OUTPUT_FORMAT_YCBCR420;
> status = intel_dp_tmds_clock_valid(intel_dp, target_clock,
> - 8, true, true);
> + 8, sink_format, true);
> if (status != MODE_OK)
> return status;
> }
> @@ -1271,19 +1277,10 @@ static bool intel_dp_supports_dsc(struct intel_dp *intel_dp,
> drm_dp_sink_supports_dsc(intel_dp->dsc_dpcd);
> }
>
> -static bool intel_dp_is_ycbcr420(struct intel_dp *intel_dp,
> - const struct intel_crtc_state *crtc_state)
> -{
> - return crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
> - (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444 &&
> - intel_dp->dfp.ycbcr_444_to_420);
> -}
> -
> static int intel_dp_hdmi_compute_bpc(struct intel_dp *intel_dp,
> const struct intel_crtc_state *crtc_state,
> int bpc, bool respect_downstream_limits)
> {
> - bool ycbcr420_output = intel_dp_is_ycbcr420(intel_dp, crtc_state);
> int clock = crtc_state->hw.adjusted_mode.crtc_clock;
>
> /*
> @@ -1303,8 +1300,8 @@ static int intel_dp_hdmi_compute_bpc(struct intel_dp *intel_dp,
>
> for (; bpc >= 8; bpc -= 2) {
> if (intel_hdmi_bpc_possible(crtc_state, bpc,
> - intel_dp->has_hdmi_sink, ycbcr420_output) &&
> - intel_dp_tmds_clock_valid(intel_dp, clock, bpc, ycbcr420_output,
> + intel_dp->has_hdmi_sink) &&
> + intel_dp_tmds_clock_valid(intel_dp, clock, bpc, crtc_state->sink_format,
> respect_downstream_limits) == MODE_OK)
> return bpc;
> }
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c
> index 1ad0540c13ee..15bf64a217c2 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c
> @@ -1793,11 +1793,6 @@ static bool intel_has_hdmi_sink(struct intel_hdmi *hdmi,
> READ_ONCE(to_intel_digital_connector_state(conn_state)->force_audio) != HDMI_AUDIO_OFF_DVI;
> }
>
> -static bool intel_hdmi_is_ycbcr420(const struct intel_crtc_state *crtc_state)
> -{
> - return crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420;
> -}
> -
> static int hdmi_port_clock_limit(struct intel_hdmi *hdmi,
> bool respect_downstream_limits,
> bool has_hdmi_sink)
> @@ -1871,10 +1866,11 @@ hdmi_port_clock_valid(struct intel_hdmi *hdmi,
> return MODE_OK;
> }
>
> -int intel_hdmi_tmds_clock(int clock, int bpc, bool ycbcr420_output)
> +int intel_hdmi_tmds_clock(int clock, int bpc,
> + enum intel_output_format sink_format)
> {
> /* YCBCR420 TMDS rate requirement is half the pixel clock */
> - if (ycbcr420_output)
> + if (sink_format == INTEL_OUTPUT_FORMAT_YCBCR420)
> clock /= 2;
>
> /*
> @@ -1901,7 +1897,8 @@ static bool intel_hdmi_source_bpc_possible(struct drm_i915_private *i915, int bp
> }
>
> static bool intel_hdmi_sink_bpc_possible(struct drm_connector *connector,
> - int bpc, bool has_hdmi_sink, bool ycbcr420_output)
> + int bpc, bool has_hdmi_sink,
> + enum intel_output_format sink_format)
> {
> const struct drm_display_info *info = &connector->display_info;
> const struct drm_hdmi_info *hdmi = &info->hdmi;
> @@ -1911,7 +1908,7 @@ static bool intel_hdmi_sink_bpc_possible(struct drm_connector *connector,
> if (!has_hdmi_sink)
> return false;
>
> - if (ycbcr420_output)
> + if (sink_format == INTEL_OUTPUT_FORMAT_YCBCR420)
> return hdmi->y420_dc_modes & DRM_EDID_YCBCR420_DC_36;
> else
> return info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_36;
> @@ -1919,7 +1916,7 @@ static bool intel_hdmi_sink_bpc_possible(struct drm_connector *connector,
> if (!has_hdmi_sink)
> return false;
>
> - if (ycbcr420_output)
> + if (sink_format == INTEL_OUTPUT_FORMAT_YCBCR420)
> return hdmi->y420_dc_modes & DRM_EDID_YCBCR420_DC_30;
> else
> return info->edid_hdmi_rgb444_dc_modes & DRM_EDID_HDMI_DC_30;
> @@ -1933,7 +1930,8 @@ static bool intel_hdmi_sink_bpc_possible(struct drm_connector *connector,
>
> static enum drm_mode_status
> intel_hdmi_mode_clock_valid(struct drm_connector *connector, int clock,
> - bool has_hdmi_sink, bool ycbcr420_output)
> + bool has_hdmi_sink,
> + enum intel_output_format sink_format)
> {
> struct drm_i915_private *i915 = to_i915(connector->dev);
> struct intel_hdmi *hdmi = intel_attached_hdmi(to_intel_connector(connector));
> @@ -1946,12 +1944,12 @@ intel_hdmi_mode_clock_valid(struct drm_connector *connector, int clock,
> * least one color depth is accepted.
> */
> for (bpc = 12; bpc >= 8; bpc -= 2) {
> - int tmds_clock = intel_hdmi_tmds_clock(clock, bpc, ycbcr420_output);
> + int tmds_clock = intel_hdmi_tmds_clock(clock, bpc, sink_format);
>
> if (!intel_hdmi_source_bpc_possible(i915, bpc))
> continue;
>
> - if (!intel_hdmi_sink_bpc_possible(connector, bpc, has_hdmi_sink, ycbcr420_output))
> + if (!intel_hdmi_sink_bpc_possible(connector, bpc, has_hdmi_sink, sink_format))
> continue;
>
> status = hdmi_port_clock_valid(hdmi, tmds_clock, true, has_hdmi_sink);
> @@ -1976,6 +1974,7 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
> int max_dotclk = to_i915(connector->dev)->max_dotclk_freq;
> bool has_hdmi_sink = intel_has_hdmi_sink(hdmi, connector->state);
> bool ycbcr_420_only;
> + enum intel_output_format sink_format;
>
> if ((mode->flags & DRM_MODE_FLAG_3D_MASK) == DRM_MODE_FLAG_3D_FRAME_PACKING)
> clock *= 2;
> @@ -2000,14 +1999,17 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
>
> ycbcr_420_only = drm_mode_is_420_only(&connector->display_info, mode);
>
> - status = intel_hdmi_mode_clock_valid(connector, clock, has_hdmi_sink, ycbcr_420_only);
> + sink_format = ycbcr_420_only ? INTEL_OUTPUT_FORMAT_YCBCR420 : INTEL_OUTPUT_FORMAT_RGB;
> +
Please try to stick to common style between here and
intel_dp_mode_valid_downstream() to avoid a some of the
head scratching when comparing the two.
> + status = intel_hdmi_mode_clock_valid(connector, clock, has_hdmi_sink, sink_format);
> if (status != MODE_OK) {
> if (ycbcr_420_only ||
> !connector->ycbcr_420_allowed ||
> !drm_mode_is_420_also(&connector->display_info, mode))
> return status;
>
> - status = intel_hdmi_mode_clock_valid(connector, clock, has_hdmi_sink, true);
> + sink_format = INTEL_OUTPUT_FORMAT_YCBCR420;
> + status = intel_hdmi_mode_clock_valid(connector, clock, has_hdmi_sink, sink_format);
> if (status != MODE_OK)
> return status;
> }
> @@ -2016,7 +2018,7 @@ intel_hdmi_mode_valid(struct drm_connector *connector,
> }
>
> bool intel_hdmi_bpc_possible(const struct intel_crtc_state *crtc_state,
> - int bpc, bool has_hdmi_sink, bool ycbcr420_output)
> + int bpc, bool has_hdmi_sink)
> {
> struct drm_atomic_state *state = crtc_state->uapi.state;
> struct drm_connector_state *connector_state;
> @@ -2027,7 +2029,8 @@ bool intel_hdmi_bpc_possible(const struct intel_crtc_state *crtc_state,
> if (connector_state->crtc != crtc_state->uapi.crtc)
> continue;
>
> - if (!intel_hdmi_sink_bpc_possible(connector, bpc, has_hdmi_sink, ycbcr420_output))
> + if (!intel_hdmi_sink_bpc_possible(connector, bpc, has_hdmi_sink,
> + crtc_state->sink_format))
> return false;
> }
>
> @@ -2045,14 +2048,13 @@ static bool hdmi_bpc_possible(const struct intel_crtc_state *crtc_state, int bpc
> return false;
>
> /* Display Wa_1405510057:icl,ehl */
> - if (intel_hdmi_is_ycbcr420(crtc_state) &&
> + if (crtc_state->sink_format == INTEL_OUTPUT_FORMAT_YCBCR420 &&
> bpc == 10 && DISPLAY_VER(dev_priv) == 11 &&
> (adjusted_mode->crtc_hblank_end -
> adjusted_mode->crtc_hblank_start) % 8 == 2)
> return false;
>
> - return intel_hdmi_bpc_possible(crtc_state, bpc, crtc_state->has_hdmi_sink,
> - intel_hdmi_is_ycbcr420(crtc_state));
> + return intel_hdmi_bpc_possible(crtc_state, bpc, crtc_state->has_hdmi_sink);
> }
>
> static int intel_hdmi_compute_bpc(struct intel_encoder *encoder,
> @@ -2060,7 +2062,6 @@ static int intel_hdmi_compute_bpc(struct intel_encoder *encoder,
> int clock, bool respect_downstream_limits)
> {
> struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
> - bool ycbcr420_output = intel_hdmi_is_ycbcr420(crtc_state);
> int bpc;
>
> /*
> @@ -2078,7 +2079,8 @@ static int intel_hdmi_compute_bpc(struct intel_encoder *encoder,
> bpc = 8;
>
> for (; bpc >= 8; bpc -= 2) {
> - int tmds_clock = intel_hdmi_tmds_clock(clock, bpc, ycbcr420_output);
> + int tmds_clock = intel_hdmi_tmds_clock(clock, bpc,
> + crtc_state->sink_format);
>
> if (hdmi_bpc_possible(crtc_state, bpc) &&
> hdmi_port_clock_valid(intel_hdmi, tmds_clock,
> @@ -2108,7 +2110,7 @@ static int intel_hdmi_compute_clock(struct intel_encoder *encoder,
> return bpc;
>
> crtc_state->port_clock =
> - intel_hdmi_tmds_clock(clock, bpc, intel_hdmi_is_ycbcr420(crtc_state));
> + intel_hdmi_tmds_clock(clock, bpc, crtc_state->sink_format);
>
> /*
> * pipe_bpp could already be below 8bpc due to
> @@ -2293,7 +2295,7 @@ int intel_hdmi_compute_config(struct intel_encoder *encoder,
> return ret;
> }
>
> - if (intel_hdmi_is_ycbcr420(pipe_config)) {
> + if (pipe_config->sink_format == INTEL_OUTPUT_FORMAT_YCBCR420) {
While the sink_format vs. output_format distinction doesn't really
matter for HDMI it might be clearer to use output_format at
least in places like this where we're clearly 100% concerned with
what comes out the end of the pipe. That is also what the DP
counterpart code checks here.
For a lot of the other cases the in the HDMI code it's a lot less
clear currently which is the more appropriate choice, and maybe
in places neither is entirely correct with the way it gets used
currently.
> ret = intel_panel_fitting(pipe_config, conn_state);
> if (ret)
> return ret;
> diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.h b/drivers/gpu/drm/i915/display/intel_hdmi.h
> index 774dda2376ed..d1e27247b657 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdmi.h
> +++ b/drivers/gpu/drm/i915/display/intel_hdmi.h
> @@ -9,6 +9,7 @@
> #include <linux/types.h>
>
> enum hdmi_infoframe_type;
> +enum intel_output_format;
> enum port;
> struct drm_connector;
> struct drm_connector_state;
> @@ -45,8 +46,8 @@ void intel_read_infoframe(struct intel_encoder *encoder,
> bool intel_hdmi_limited_color_range(const struct intel_crtc_state *crtc_state,
> const struct drm_connector_state *conn_state);
> bool intel_hdmi_bpc_possible(const struct intel_crtc_state *crtc_state,
> - int bpc, bool has_hdmi_sink, bool ycbcr420_output);
> -int intel_hdmi_tmds_clock(int clock, int bpc, bool ycbcr420_output);
> + int bpc, bool has_hdmi_sink);
> +int intel_hdmi_tmds_clock(int clock, int bpc, enum intel_output_format sink_format);
> int intel_hdmi_dsc_get_bpp(int src_fractional_bpp, int slice_width,
> int num_slices, int output_format, bool hdmi_all_bpp,
> int hdmi_max_chunk_bytes);
> --
> 2.25.1
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list