[Intel-gfx] [PATCH 5/8] drm/i915/psr: Define more PSR mask bits
Ville Syrjala
ville.syrjala at linux.intel.com
Tue Mar 28 09:30:39 UTC 2023
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Define more of the PSR mask bits, and describe in detail
what some of them do. Even if we don't set them all from
the driver they can be very useful during PSR debugging.
Having to trawl through bspec every time to find them is
not fun, and re-reverse engineering the behaviour every
time is time consuming (even if a bit more fun than spec
trawling).
v2: Moar bits
Put the description into a comment to be easily available
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_psr.c | 85 ++++++++++++++++++++++++
drivers/gpu/drm/i915/i915_reg.h | 27 ++++++--
drivers/gpu/drm/i915/intel_pm.c | 4 +-
3 files changed, 109 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index 9e5ffe4eac6f..142cd174475e 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -84,6 +84,91 @@
* use page flips.
*/
+/*
+ * Description of PSR mask bits:
+ *
+ * EDP_PSR_DEBUG[16]/EDP_PSR_DEBUG_MASK_DISP_REG_WRITE (hsw-skl):
+ *
+ * When unmasked (nearly) all display register writes (eg. even
+ * SWF) trigger a PSR exit. Some registers are excluded from this
+ * and they have a more specific mask (described below). On icl+
+ * this bit no longer exists and is effectively always set.
+ *
+ * PIPE_MISC[21]/PIPE_MISC_PSR_MASK_PIPE_REG_WRITE (skl+):
+ *
+ * When unmasked (nearly) all pipe/plane register writes
+ * trigger a PSR exit. Some plane registers are excluded from this
+ * and they have a more specific mask (described below).
+ *
+ * CHICKEN_PIPESL_1[11]/SKL_PSR_MASK_PLANE_FLIP (skl+):
+ * PIPE_MISC[23]/PIPE_MISC_PSR_MASK_PRIMARY_FLIP (bdw):
+ * EDP_PSR_DEBUG[23]/EDP_PSR_DEBUG_MASK_PRIMARY_FLIP (hsw):
+ *
+ * When unmasked PRI_SURF/PLANE_SURF writes trigger a PSR exit.
+ * SPR_SURF/CURBASE are not included in this and instead are
+ * controlled by PIPE_MISC_PSR_MASK_PIPE_REG_WRITE (skl+) or
+ * EDP_PSR_DEBUG_MASK_DISP_REG_WRITE (hsw/bdw).
+ *
+ * PIPE_MISC[22]/PIPE_MISC_PSR_MASK_SPRITE_ENABLE (bdw):
+ * EDP_PSR_DEBUG[21]/EDP_PSR_DEBUG_MASK_SPRITE_ENABLE (hsw):
+ *
+ * When unmasked PSR is blocked as long as the sprite
+ * plane is enabled. skl+ with their universal planes no
+ * longer have a mask bit like this, and no plane being
+ * enabledb blocks PSR.
+ *
+ * PIPE_MISC[21]/PIPE_MISC_PSR_MASK_CURSOR_MOVE (bdw):
+ * EDP_PSR_DEBUG[20]/EDP_PSR_DEBUG_MASK_CURSOR_MOVE (hsw):
+ *
+ * When umasked CURPOS writes trigger a PSR exit. On skl+
+ * this doesn't exit but CURPOS is included in the
+ * PIPE_MISC_PSR_MASK_PIPE_REG_WRITE mask.
+ *
+ * PIPE_MISC[20]/PIPE_MISC_PSR_MASK_VBLANK_VSYNC_INT (bdw+):
+ * EDP_PSR_DEBUG[19]/EDP_PSR_DEBUG_MASK_VBLANK_VSYNC_INT (hsw):
+ *
+ * When unmasked PSR is blocked as long as vblank and/or vsync
+ * interrupt is unmasked in IMR *and* enabled in IER.
+ *
+ * CHICKEN_TRANS[30]/SKL_UNMASK_VBL_TO_PIPE_IN_SRD (skl+):
+ * CHICKEN_PAR1_1[15]/HSW_MASK_VBL_TO_PIPE_IN_SRD (hsw/bdw):
+ *
+ * Selectcs whether PSR exit generates an extra vblank before
+ * the first frame is transmitted. Also note the opposite polarity
+ * if the bit on hsw/bdw vs. skl+ (masked==generate the extra vblank,
+ * unmasked==do not generate the extra vblank).
+ *
+ * With DC states enabled the extra vblank happens after link training,
+ * with DC states disabled it happens immediately upuon PSR exit trigger.
+ * No idea as of now why there is a difference. HSW/BDW (which don't
+ * even have DMC) always generate it after link training. Go figure.
+ *
+ * Unfortunately CHICKEN_TRANS itself seems to be double buffered
+ * and thus won't latch until the first vblank. So with DC states
+ * enabled the register effctively uses the reset value during DC5
+ * exit+PSR exit sequence, and thus the bit does nothing until
+ * latched by the vblank that it was trying to prevent from being
+ * generated in the first place. So we should probably call this
+ * one a chicken/egg bit instead on skl+.
+ *
+ * In standby mode (as opposed to link-off) this makes no difference
+ * as the timing generator keeps running the whole time generating
+ * normal periodic vblanks.
+ *
+ * WaPsrDPAMaskVBlankInSRD asks us to set the bit on hsw/bdw,
+ * and doing so makes the behaviour match the skl+ reset value.
+ *
+ * CHICKEN_PIPESL_1[0]/BDW_UNMASK_VBL_TO_REGS_IN_SRD (bdw):
+ * CHICKEN_PIPESL_1[15]/HSW_UNMASK_VBL_TO_REGS_IN_SRD (hsw):
+ *
+ * Effect unknown. WaPsrDPRSUnmaskVBlankInSRD says to set the
+ * bit, but not apparent change in hardware behaviour either
+ * way.
+ *
+ * The rest of the bits are more self-explanatory and/or
+ * irrelevant for normal operation.
+ */
+
static bool psr_global_enabled(struct intel_dp *intel_dp)
{
struct intel_connector *connector = intel_dp->attached_connector;
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index d0f5ea0a0e78..e0cc4078b352 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2209,8 +2209,18 @@
#define EDP_PSR_DEBUG_MASK_LPSP REG_BIT(27)
#define EDP_PSR_DEBUG_MASK_MEMUP REG_BIT(26)
#define EDP_PSR_DEBUG_MASK_HPD REG_BIT(25)
-#define EDP_PSR_DEBUG_MASK_DISP_REG_WRITE REG_BIT(16) /* Reserved in ICL+ */
-#define EDP_PSR_DEBUG_EXIT_ON_PIXEL_UNDERRUN REG_BIT(15) /* SKL+ */
+#define EDP_PSR_DEBUG_MASK_FBC_MODIFY REG_BIT(24)
+#define EDP_PSR_DEBUG_MASK_PRIMARY_FLIP REG_BIT(23) /* hsw */
+#define EDP_PSR_DEBUG_MASK_HDCP_ENABLE REG_BIT(22) /* hsw/bdw */
+#define EDP_PSR_DEBUG_MASK_SPRITE_ENABLE REG_BIT(21) /* hsw */
+#define EDP_PSR_DEBUG_MASK_CURSOR_MOVE REG_BIT(20) /* hsw */
+#define EDP_PSR_DEBUG_MASK_VBLANK_VSYNC_INT REG_BIT(19) /* hsw */
+#define EDP_PSR_DEBUG_MASK_DPST_PHASE_IN REG_BIT(18) /* hsw */
+#define EDP_PSR_DEBUG_MASK_KVMR_SESSION_EN REG_BIT(17)
+#define EDP_PSR_DEBUG_MASK_DISP_REG_WRITE REG_BIT(16) /* hsw-skl */
+#define EDP_PSR_DEBUG_EXIT_ON_PIXEL_UNDERRUN REG_BIT(15) /* skl+ */
+#define EDP_PSR_DEBUG_RFB_UPDATE_SENT REG_BIT(2) /* bdw */
+#define EDP_PSR_DEBUG_ENTRY_COMPLETION REG_BIT(1) /* hsw/bdw */
#define _PSR2_CTL_A 0x60900
#define _PSR2_CTL_EDP 0x6f900
@@ -3506,6 +3516,11 @@
#define PIPE_MISC_YUV420_ENABLE REG_BIT(27) /* glk+ */
#define PIPE_MISC_YUV420_MODE_FULL_BLEND REG_BIT(26) /* glk+ */
#define PIPE_MISC_HDR_MODE_PRECISION REG_BIT(23) /* icl+ */
+#define PIPE_MISC_PSR_MASK_PRIMARY_FLIP REG_BIT(23) /* bdw */
+#define PIPE_MISC_PSR_MASK_SPRITE_ENABLE REG_BIT(22) /* bdw */
+#define PIPE_MISC_PSR_MASK_PIPE_REG_WRITE REG_BIT(21) /* skl+ */
+#define PIPE_MISC_PSR_MASK_CURSOR_MOVE REG_BIT(21) /* bdw */
+#define PIPE_MISC_PSR_MASK_VBLANK_VSYNC_INT REG_BIT(20)
#define PIPE_MISC_OUTPUT_COLORSPACE_YUV REG_BIT(11)
#define PIPE_MISC_PIXEL_ROUNDING_TRUNC REG_BIT(8) /* tgl+ */
/*
@@ -5509,7 +5524,7 @@
#define KBL_ARB_FILL_SPARE_22 REG_BIT(22)
#define DIS_RAM_BYPASS_PSR2_MAN_TRACK REG_BIT(16)
#define SKL_DE_COMPRESSED_HASH_MODE REG_BIT(15)
-#define DPA_MASK_VBLANK_SRD REG_BIT(15)
+#define HSW_MASK_VBL_TO_PIPE_IN_SRD REG_BIT(15) /* hsw/bdw */
#define FORCE_ARB_IDLE_PLANES REG_BIT(14)
#define SKL_EDP_PSR_FIX_RDWRAP REG_BIT(3)
#define IGNORE_PSR2_HW_TRACKING REG_BIT(1)
@@ -5544,12 +5559,14 @@
#define HSW_SPR_STRETCH_MAX_X2 REG_FIELD_PREP(HSW_SPR_STRETCH_MAX_MASK, 2)
#define HSW_SPR_STRETCH_MAX_X1 REG_FIELD_PREP(HSW_SPR_STRETCH_MAX_MASK, 3)
#define HSW_FBCQ_DIS REG_BIT(22)
+#define HSW_UNMASK_VBL_TO_REGS_IN_SRD REG_BIT(15) /* hsw */
+#define SKL_PSR_MASK_PLANE_FLIP REG_BIT(11) /* skl+ */
#define SKL_PLANE1_STRETCH_MAX_MASK REG_GENMASK(1, 0)
#define SKL_PLANE1_STRETCH_MAX_X8 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 0)
#define SKL_PLANE1_STRETCH_MAX_X4 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 1)
#define SKL_PLANE1_STRETCH_MAX_X2 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 2)
#define SKL_PLANE1_STRETCH_MAX_X1 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 3)
-#define BDW_DPRS_MASK_VBLANK_SRD REG_BIT(0)
+#define BDW_UNMASK_VBL_TO_REGS_IN_SRD REG_BIT(0) /* bdw */
#define _CHICKEN_TRANS_A 0x420c0
#define _CHICKEN_TRANS_B 0x420c4
@@ -5568,7 +5585,7 @@
#define MTL_CHICKEN_TRANS(trans) _MMIO_TRANS((trans), \
_MTL_CHICKEN_TRANS_A, \
_MTL_CHICKEN_TRANS_B)
-
+#define SKL_UNMASK_VBL_TO_PIPE_IN_SRD REG_BIT(30) /* skl+ */
#define HSW_FRAME_START_DELAY_MASK REG_GENMASK(28, 27)
#define HSW_FRAME_START_DELAY(x) REG_FIELD_PREP(HSW_FRAME_START_DELAY_MASK, x)
#define VSC_DATA_SEL_SOFTWARE_CONTROL REG_BIT(25) /* GLK */
diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
index c45af0d981fd..564ccc20fcaf 100644
--- a/drivers/gpu/drm/i915/intel_pm.c
+++ b/drivers/gpu/drm/i915/intel_pm.c
@@ -518,12 +518,12 @@ static void bdw_init_clock_gating(struct drm_i915_private *dev_priv)
intel_uncore_rmw(&dev_priv->uncore, GAM_ECOCHK, 0, HSW_ECOCHK_ARB_PRIO_SOL);
/* WaPsrDPAMaskVBlankInSRD:bdw */
- intel_uncore_rmw(&dev_priv->uncore, CHICKEN_PAR1_1, 0, DPA_MASK_VBLANK_SRD);
+ intel_uncore_rmw(&dev_priv->uncore, CHICKEN_PAR1_1, 0, HSW_MASK_VBL_TO_PIPE_IN_SRD);
for_each_pipe(dev_priv, pipe) {
/* WaPsrDPRSUnmaskVBlankInSRD:bdw */
intel_uncore_rmw(&dev_priv->uncore, CHICKEN_PIPESL_1(pipe),
- 0, BDW_DPRS_MASK_VBLANK_SRD);
+ 0, BDW_UNMASK_VBL_TO_REGS_IN_SRD);
}
/* WaVSRefCountFullforceMissDisable:bdw */
--
2.39.2
More information about the Intel-gfx
mailing list