[Intel-gfx] [PATCHv3] drm/i915/display/dp: 128/132b LT requirement

[Jani Nikula]

On Tue, 25 Apr 2023, Arun R Murthy <arun.r.murthy at intel.com> wrote:
> For 128b/132b LT prior to LT DPTX should set power state, DP channel
> coding and then link rate.
>
> v2: added separate function to avoid code duplication(Jani N)
> v3: DP2.1 section 3.5.2.16 is ordered, 3.5.1.2 is unordered and hence
>     discarding <Ville>
>
> Signed-off-by: Arun R Murthy <arun.r.murthy at intel.com>

Thanks for the patch, pushed to drm-intel-next.

BR,
Jani.


> ---
>  .../drm/i915/display/intel_dp_link_training.c | 56 +++++++++++++------
>  1 file changed, 38 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_link_training.c b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> index 6aa4ae5e7ebe..27eb41499d7e 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_link_training.c
> @@ -637,6 +637,37 @@ static bool intel_dp_link_max_vswing_reached(struct intel_dp *intel_dp,
>  	return true;
>  }
>  
> +static void
> +intel_dp_update_downspread_ctrl(struct intel_dp *intel_dp,
> +				const struct intel_crtc_state *crtc_state)
> +{
> +	u8 link_config[2];
> +
> +	link_config[0] = crtc_state->vrr.flipline ? DP_MSA_TIMING_PAR_IGNORE_EN : 0;
> +	link_config[1] = intel_dp_is_uhbr(crtc_state) ?
> +			 DP_SET_ANSI_128B132B : DP_SET_ANSI_8B10B;
> +	drm_dp_dpcd_write(&intel_dp->aux, DP_DOWNSPREAD_CTRL, link_config, 2);
> +}
> +
> +static void
> +intel_dp_update_link_bw_set(struct intel_dp *intel_dp,
> +			    const struct intel_crtc_state *crtc_state,
> +			    u8 link_bw, u8 rate_select)
> +{
> +	u8 link_config[2];
> +
> +	/* Write the link configuration data */
> +	link_config[0] = link_bw;
> +	link_config[1] = crtc_state->lane_count;
> +	if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
> +		link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
> +	drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2);
> +	/* eDP 1.4 rate select method. */
> +	if (!link_bw)
> +		drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_RATE_SET,
> +				  &rate_select, 1);
> +}
> +
>  /*
>   * Prepare link training by configuring the link parameters. On DDI platforms
>   * also enable the port here.
> @@ -647,7 +678,6 @@ intel_dp_prepare_link_train(struct intel_dp *intel_dp,
>  {
>  	struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
>  	struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> -	u8 link_config[2];
>  	u8 link_bw, rate_select;
>  
>  	if (intel_dp->prepare_link_retrain)
> @@ -686,23 +716,13 @@ intel_dp_prepare_link_train(struct intel_dp *intel_dp,
>  		drm_dbg_kms(&i915->drm,
>  			    "[ENCODER:%d:%s] Using LINK_RATE_SET value %02x\n",
>  			    encoder->base.base.id, encoder->base.name, rate_select);
> -
> -	/* Write the link configuration data */
> -	link_config[0] = link_bw;
> -	link_config[1] = crtc_state->lane_count;
> -	if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
> -		link_config[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN;
> -	drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_BW_SET, link_config, 2);
> -
> -	/* eDP 1.4 rate select method. */
> -	if (!link_bw)
> -		drm_dp_dpcd_write(&intel_dp->aux, DP_LINK_RATE_SET,
> -				  &rate_select, 1);
> -
> -	link_config[0] = crtc_state->vrr.flipline ? DP_MSA_TIMING_PAR_IGNORE_EN : 0;
> -	link_config[1] = intel_dp_is_uhbr(crtc_state) ?
> -		DP_SET_ANSI_128B132B : DP_SET_ANSI_8B10B;
> -	drm_dp_dpcd_write(&intel_dp->aux, DP_DOWNSPREAD_CTRL, link_config, 2);
> +	/*
> +	 * Spec DP2.1 Section 3.5.2.16
> +	 * Prior to LT DPTX should set 128b/132b DP Channel coding and then set link rate
> +	 */
> +	intel_dp_update_downspread_ctrl(intel_dp, crtc_state);
> +	intel_dp_update_link_bw_set(intel_dp, crtc_state, link_bw,
> +				    rate_select);
>  
>  	return true;
>  }

-- 
Jani Nikula, Intel Open Source Graphics Center