[Intel-gfx] [PATCH v6 7/7] drm/i915/mtl: Add support for PM DEMAND
Gustavo Sousa
gustavo.sousa at intel.com
Tue May 23 15:09:00 UTC 2023
Quoting Vinod Govindapillai (2023-05-22 20:07:59-03:00)
>From: Mika Kahola <mika.kahola at intel.com>
>
>MTL introduces a new way to instruct the PUnit with
>power and bandwidth requirements of DE. Add the functionality
>to program the registers and handle waits using interrupts.
>The current wait time for timeouts is programmed for 10 msecs to
>factor in the worst case scenarios. Changes made to use REG_BIT
>for a register that we touched(GEN8_DE_MISC_IER _MMIO).
>
>Wa_14016740474 is added which applies to Xe_LPD+ display
>
>v2: checkpatch warning fixes, simplify program pmdemand part
>
>v3: update to dbufs and pipes values to pmdemand register(stan)
> Removed the macro usage in update_pmdemand_values()
>
>v4: move the pmdemand_pre_plane_update before cdclk update
> pmdemand_needs_update included cdclk params comparisons
> pmdemand_state NULL check (Gustavo)
> pmdemand.o in sorted order in the makefile (Jani)
> update pmdemand misc irq handler loop (Gustavo)
> active phys bitmask and programming correction (Gustavo)
>
>v5: simplify pmdemand_state structure
> simplify methods to find active phys and max port clock
> Timeout in case of previou pmdemand task pending (Gustavo)
>
>Bspec: 66451, 64636, 64602, 64603
>Cc: Matt Atwood <matthew.s.atwood at intel.com>
>Cc: Matt Roper <matthew.d.roper at intel.com>
>Cc: Lucas De Marchi <lucas.demarchi at intel.com>
>Cc: Gustavo Sousa <gustavo.sousa at intel.com>
>Signed-off-by: José Roberto de Souza <jose.souza at intel.com>
>Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada at intel.com>
>Signed-off-by: Gustavo Sousa <gustavo.sousa at intel.com>
>Signed-off-by: Mika Kahola <mika.kahola at intel.com>
>Signed-off-by: Vinod Govindapillai <vinod.govindapillai at intel.com>
>Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
>---
> drivers/gpu/drm/i915/Makefile | 1 +
> drivers/gpu/drm/i915/display/intel_display.c | 14 +
> .../gpu/drm/i915/display/intel_display_core.h | 9 +
> .../drm/i915/display/intel_display_driver.c | 7 +
> .../drm/i915/display/intel_display_power.c | 8 +
> drivers/gpu/drm/i915/display/intel_pmdemand.c | 503 ++++++++++++++++++
> drivers/gpu/drm/i915/display/intel_pmdemand.h | 24 +
> drivers/gpu/drm/i915/i915_irq.c | 23 +-
> drivers/gpu/drm/i915/i915_reg.h | 36 +-
> 9 files changed, 621 insertions(+), 4 deletions(-)
> create mode 100644 drivers/gpu/drm/i915/display/intel_pmdemand.c
> create mode 100644 drivers/gpu/drm/i915/display/intel_pmdemand.h
>
>diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
>index 7587fe856e67..2698ecf74844 100644
>--- a/drivers/gpu/drm/i915/Makefile
>+++ b/drivers/gpu/drm/i915/Makefile
>@@ -270,6 +270,7 @@ i915-y += \
> display/intel_pch_display.o \
> display/intel_pch_refclk.o \
> display/intel_plane_initial.o \
>+ display/intel_pmdemand.o \
> display/intel_psr.o \
> display/intel_quirks.o \
> display/intel_sprite.o \
>diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
>index 1d5d42a40803..d9daafe3362c 100644
>--- a/drivers/gpu/drm/i915/display/intel_display.c
>+++ b/drivers/gpu/drm/i915/display/intel_display.c
>@@ -99,6 +99,7 @@
> #include "intel_pcode.h"
> #include "intel_pipe_crc.h"
> #include "intel_plane_initial.h"
>+#include "intel_pmdemand.h"
> #include "intel_pps.h"
> #include "intel_psr.h"
> #include "intel_sdvo.h"
>@@ -6315,6 +6316,10 @@ int intel_atomic_check(struct drm_device *dev,
> return ret;
> }
>
>+ ret = intel_pmdemand_atomic_check(state);
>+ if (ret)
>+ goto fail;
>+
> ret = intel_atomic_check_crtcs(state);
> if (ret)
> goto fail;
>@@ -6960,6 +6965,14 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
> for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
> crtc->config = new_crtc_state;
>
>+ /*
>+ * In XE_LPD+ Pmdemand combines many parameters such as voltage index,
>+ * plls, cdclk frequency, QGV point selection parameter etc. Voltage
>+ * index, cdclk/ddiclk frequencies are supposed to be configured before
>+ * the cdclk config is set.
>+ */
>+ intel_pmdemand_pre_plane_update(state);
>+
> if (state->modeset) {
> drm_atomic_helper_update_legacy_modeset_state(dev, &state->base);
>
>@@ -7079,6 +7092,7 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
> intel_verify_planes(state);
>
> intel_sagv_post_plane_update(state);
>+ intel_pmdemand_post_plane_update(state);
>
> drm_atomic_helper_commit_hw_done(&state->base);
>
>diff --git a/drivers/gpu/drm/i915/display/intel_display_core.h b/drivers/gpu/drm/i915/display/intel_display_core.h
>index 9f66d734edf6..ae45b2c42eb1 100644
>--- a/drivers/gpu/drm/i915/display/intel_display_core.h
>+++ b/drivers/gpu/drm/i915/display/intel_display_core.h
>@@ -345,6 +345,15 @@ struct intel_display {
> struct intel_global_obj obj;
> } dbuf;
>
>+ struct {
>+ wait_queue_head_t waitqueue;
>+
>+ /* mutex to protect pmdemand programming sequence */
>+ struct mutex lock;
>+
>+ struct intel_global_obj obj;
>+ } pmdemand;
>+
> struct {
> /*
> * dkl.phy_lock protects against concurrent access of the
>diff --git a/drivers/gpu/drm/i915/display/intel_display_driver.c b/drivers/gpu/drm/i915/display/intel_display_driver.c
>index 60ce10fc7205..dc8de861339d 100644
>--- a/drivers/gpu/drm/i915/display/intel_display_driver.c
>+++ b/drivers/gpu/drm/i915/display/intel_display_driver.c
>@@ -47,6 +47,7 @@
> #include "intel_opregion.h"
> #include "intel_overlay.h"
> #include "intel_plane_initial.h"
>+#include "intel_pmdemand.h"
> #include "intel_pps.h"
> #include "intel_quirks.h"
> #include "intel_vga.h"
>@@ -211,6 +212,8 @@ int intel_display_driver_probe_noirq(struct drm_i915_private *i915)
> if (ret < 0)
> goto cleanup_vga;
>
>+ intel_pmdemand_init_early(i915);
>+
> intel_power_domains_init_hw(i915, false);
>
> if (!HAS_DISPLAY(i915))
>@@ -240,6 +243,10 @@ int intel_display_driver_probe_noirq(struct drm_i915_private *i915)
> if (ret)
> goto cleanup_vga_client_pw_domain_dmc;
>
>+ ret = intel_pmdemand_init(i915);
>+ if (ret)
>+ goto cleanup_vga_client_pw_domain_dmc;
>+
> init_llist_head(&i915->display.atomic_helper.free_list);
> INIT_WORK(&i915->display.atomic_helper.free_work,
> intel_atomic_helper_free_state_worker);
>diff --git a/drivers/gpu/drm/i915/display/intel_display_power.c b/drivers/gpu/drm/i915/display/intel_display_power.c
>index 5150069f3f82..f5c5a486efbc 100644
>--- a/drivers/gpu/drm/i915/display/intel_display_power.c
>+++ b/drivers/gpu/drm/i915/display/intel_display_power.c
>@@ -20,6 +20,7 @@
> #include "intel_mchbar_regs.h"
> #include "intel_pch_refclk.h"
> #include "intel_pcode.h"
>+#include "intel_pmdemand.h"
> #include "intel_pps_regs.h"
> #include "intel_snps_phy.h"
> #include "skl_watermark.h"
>@@ -1085,6 +1086,10 @@ static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
> dev_priv->display.dbuf.enabled_slices =
> intel_enabled_dbuf_slices_mask(dev_priv);
>
>+ if (DISPLAY_VER(dev_priv) >= 14)
>+ intel_program_dbuf_pmdemand(dev_priv, BIT(DBUF_S1) |
>+ dev_priv->display.dbuf.enabled_slices);
>+
> /*
> * Just power up at least 1 slice, we will
> * figure out later which slices we have and what we need.
>@@ -1096,6 +1101,9 @@ static void gen9_dbuf_enable(struct drm_i915_private *dev_priv)
> static void gen9_dbuf_disable(struct drm_i915_private *dev_priv)
> {
> gen9_dbuf_slices_update(dev_priv, 0);
>+
>+ if (DISPLAY_VER(dev_priv) >= 14)
>+ intel_program_dbuf_pmdemand(dev_priv, 0);
> }
>
> static void gen12_dbuf_slices_config(struct drm_i915_private *dev_priv)
>diff --git a/drivers/gpu/drm/i915/display/intel_pmdemand.c b/drivers/gpu/drm/i915/display/intel_pmdemand.c
>new file mode 100644
>index 000000000000..843440b9430b
>--- /dev/null
>+++ b/drivers/gpu/drm/i915/display/intel_pmdemand.c
>@@ -0,0 +1,503 @@
>+// SPDX-License-Identifier: MIT
>+/*
>+ * Copyright © 2024 Intel Corporation
>+ */
>+
>+#include <linux/bitops.h>
>+
>+#include "i915_drv.h"
>+#include "i915_reg.h"
>+#include "intel_bw.h"
>+#include "intel_cdclk.h"
>+#include "intel_cx0_phy.h"
>+#include "intel_de.h"
>+#include "intel_display.h"
>+#include "intel_display_trace.h"
>+#include "intel_pmdemand.h"
>+#include "skl_watermark.h"
>+
>+struct pmdemand_params {
>+ u16 qclk_gv_bw;
>+ u8 voltage_index;
>+ u8 qclk_gv_index;
>+ u8 active_pipes;
>+ u8 dbufs;
>+ u8 active_phys;
>+ u16 cdclk_freq_mhz;
>+ u16 ddiclk_max;
>+ u8 scalers;
>+};
>+struct intel_pmdemand_state {
>+ struct intel_global_state base;
>+
>+ /* Parameters to be configured in the pmdemand registers */
>+ struct pmdemand_params params;
>+};
>+
>+#define to_intel_pmdemand_state(x) container_of((x) + BUILD_BUG_ON_ZERO(offsetof(struct intel_pmdemand_state, base)), \
>+ struct intel_pmdemand_state, base)
>+
>+static struct intel_global_state *
>+intel_pmdemand_duplicate_state(struct intel_global_obj *obj)
>+{
>+ struct intel_pmdemand_state *pmdmnd_state;
>+
>+ pmdmnd_state = kmemdup(obj->state, sizeof(*pmdmnd_state), GFP_KERNEL);
>+ if (!pmdmnd_state)
>+ return NULL;
>+
>+ return &pmdmnd_state->base;
>+}
>+
>+static void intel_pmdemand_destroy_state(struct intel_global_obj *obj,
>+ struct intel_global_state *state)
>+{
>+ kfree(state);
>+}
>+
>+static const struct intel_global_state_funcs intel_pmdemand_funcs = {
>+ .atomic_duplicate_state = intel_pmdemand_duplicate_state,
>+ .atomic_destroy_state = intel_pmdemand_destroy_state,
>+};
>+
>+static struct intel_pmdemand_state *
>+intel_atomic_get_pmdemand_state(struct intel_atomic_state *state)
>+{
>+ struct drm_i915_private *i915 = to_i915(state->base.dev);
>+ struct intel_global_state *pmdemand_state =
>+ intel_atomic_get_global_obj_state(state,
>+ &i915->display.pmdemand.obj);
>+
>+ if (IS_ERR(pmdemand_state))
>+ return ERR_CAST(pmdemand_state);
>+
>+ return to_intel_pmdemand_state(pmdemand_state);
>+}
>+
>+static struct intel_pmdemand_state *
>+intel_atomic_get_old_pmdemand_state(struct intel_atomic_state *state)
>+{
>+ struct drm_i915_private *i915 = to_i915(state->base.dev);
>+ struct intel_global_state *pmdemand_state =
>+ intel_atomic_get_old_global_obj_state(state,
>+ &i915->display.pmdemand.obj);
>+
>+ if (!pmdemand_state)
>+ return NULL;
>+
>+ return to_intel_pmdemand_state(pmdemand_state);
>+}
>+
>+static struct intel_pmdemand_state *
>+intel_atomic_get_new_pmdemand_state(struct intel_atomic_state *state)
>+{
>+ struct drm_i915_private *i915 = to_i915(state->base.dev);
>+ struct intel_global_state *pmdemand_state =
>+ intel_atomic_get_new_global_obj_state(state,
>+ &i915->display.pmdemand.obj);
>+
>+ if (!pmdemand_state)
>+ return NULL;
>+
>+ return to_intel_pmdemand_state(pmdemand_state);
>+}
>+
>+int intel_pmdemand_init(struct drm_i915_private *i915)
>+{
>+ struct intel_pmdemand_state *pmdemand_state;
>+
>+ pmdemand_state = kzalloc(sizeof(*pmdemand_state), GFP_KERNEL);
>+ if (!pmdemand_state)
>+ return -ENOMEM;
>+
>+ intel_atomic_global_obj_init(i915, &i915->display.pmdemand.obj,
>+ &pmdemand_state->base,
>+ &intel_pmdemand_funcs);
>+
>+ if (IS_MTL_DISPLAY_STEP(i915, STEP_A0, STEP_C0))
>+ /* Wa_14016740474 */
>+ intel_de_rmw(i915, XELPD_CHICKEN_DCPR_3, 0, DMD_RSP_TIMEOUT_DISABLE);
>+
>+ return 0;
>+}
>+
>+void intel_pmdemand_init_early(struct drm_i915_private *i915)
>+{
>+ mutex_init(&i915->display.pmdemand.lock);
>+ init_waitqueue_head(&i915->display.pmdemand.waitqueue);
>+}
>+
>+static u16 pmdemand_max_ddiclk(struct intel_atomic_state *state,
>+ struct intel_pmdemand_state *pmdemand_state)
>+{
>+ int max = 0;
>+ struct intel_crtc *crtc;
>+ int i;
>+ const struct intel_crtc_state *new_crtc_state, *old_crtc_state;
>+
>+ for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
>+ new_crtc_state, i)
Wouldn't we need to check if this CRTC is active here and adjust the
actions according to the outcome?
>+ max = max(new_crtc_state->port_clock, max);
>+
>+ return DIV_ROUND_UP(max, 1000);
I still think this would not work on every scenario: my understanding is
that we are not iterating through all active crtcs here, but only those
in *this* atomic update. So, for example, if we are only updating CRTC A
here but already have active CRTCs B and C, and one of them have higher
port clock than A's, then we would wrongly select A's port clock as the
maximum one.
Now, we could think of the option of defining the initial value for the
max port clock to the one from the old intel_pmdemand_state and then do
the loop. In the example above, if B is the one with the maximum, then
things would work out for that specific example.
Unfortunately, that still would not be the correct solution. An example
of how this could give us the wrong value: let's say CRTC A is the one
with the maximum port clock among three currently active CRTCs A, B and
C. That means that in the next atomic update, we would initialize the
max variable with A's port clock. If such update is for *disabling* CRTC
A, we would be initializing that variable with an invalid value.
That is why I still think that we need to have a solution similar to
what is done in intel_bw_check_data_rate(): to use an array so that we
have an up-to-date list of active port clocks (we could have the
inactive ones as zeros).
>+}
>+
>+static u8
>+pmdemand_active_non_tc_phys(struct drm_i915_private *i915,
>+ struct intel_atomic_state *state,
>+ struct intel_pmdemand_state *pmdemand_state)
>+{
>+ struct drm_connector_list_iter conn_iter;
>+ struct intel_connector *connector;
>+ u8 phys = 0;
>+
>+ drm_connector_list_iter_begin(&i915->drm, &conn_iter);
>+ for_each_intel_connector_iter(connector, &conn_iter) {
>+ enum phy phy = intel_port_to_phy(i915, connector->encoder->port);
>+
>+ if (intel_phy_is_tc(i915, phy))
>+ continue;
>+
>+ if (connector->get_hw_state(connector))
>+ phys++;
>+ }
>+ drm_connector_list_iter_end(&conn_iter);
>+
>+ return phys;
Hm... I do not think we should really look at the hardware at this point of the
atomic transaction. The transaction will potentially change the hardware state
when committed. If we are disabling or enabling phys, then we would program PM
Demand an outdated value.
Regarding the previous implementation (from patch v3 or v5) I also do not think
it would cover all scenarios for similar reasons stated above for the the max
port clock calculation. I still think a proper implementation would be doing
something similar to what is done in intel_calc_active_pipes(): to use a mask so
that we have a view of all active phys.
Note that using a mask is similar to using an array like in the proposed
solution for the max port clock. Using a mask here is just because we are
tracking boolean states, which could be efficiently done with a mask,
considering that we have enough bits.
Well, all that said (about this and pmdemand_max_ddiclk), I quite new on atomic
modesetting and I might be making wrong assumptions here. Ville, could you
please provide some input on this matter?
>+}
>+
>+
>+static bool pmdemand_needs_update(struct intel_atomic_state *state)
>+{
>+ bool states_checked = false;
>+ struct intel_crtc *crtc;
>+ int i;
>+ const struct intel_crtc_state *new_crtc_state, *old_crtc_state;
>+
>+ for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
>+ new_crtc_state, i) {
>+ const struct intel_bw_state *new_bw_state, *old_bw_state;
>+ const struct intel_cdclk_state *new_cdclk_state;
>+ const struct intel_cdclk_state *old_cdclk_state;
>+ const struct intel_dbuf_state *new_dbuf_state, *old_dbuf_state;
>+
>+ if (old_crtc_state->port_clock != new_crtc_state->port_clock)
>+ return true;
>+
>+ /*
>+ * For the below settings once through the loop is enough.
>+ * Some pmdemand_atomic_check calls might trigger read lock not
>+ * taken assert if these following checks are kept outside this
>+ * loop.
>+ */
>+ if (states_checked)
>+ continue;
>+
>+ new_bw_state = intel_atomic_get_new_bw_state(state);
>+ old_bw_state = intel_atomic_get_old_bw_state(state);
>+ if (new_bw_state && new_bw_state->qgv_point_peakbw !=
>+ old_bw_state->qgv_point_peakbw)
>+ return true;
>+
>+ new_dbuf_state = intel_atomic_get_new_dbuf_state(state);
>+ old_dbuf_state = intel_atomic_get_old_dbuf_state(state);
>+ if (new_dbuf_state && new_dbuf_state->active_pipes !=
>+ old_dbuf_state->active_pipes)
>+ return true;
>+
>+ new_cdclk_state = intel_atomic_get_new_cdclk_state(state);
>+ old_cdclk_state = intel_atomic_get_old_cdclk_state(state);
>+ if (new_cdclk_state &&
>+ (new_cdclk_state->logical.cdclk !=
>+ old_cdclk_state->logical.cdclk ||
>+ new_cdclk_state->logical.voltage_level !=
>+ old_cdclk_state->logical.voltage_level))
>+ return true;
>+
>+ states_checked = true;
>+ }
>+
>+ return false;
>+}
>+
>+int intel_pmdemand_atomic_check(struct intel_atomic_state *state)
>+{
>+ struct drm_i915_private *i915 = to_i915(state->base.dev);
>+ const struct intel_bw_state *new_bw_state;
>+ const struct intel_cdclk_state *new_cdclk_state;
>+ const struct intel_dbuf_state *new_dbuf_state;
>+ struct intel_pmdemand_state *new_pmdemand_state;
>+ int ret;
>+
>+ if (DISPLAY_VER(i915) < 14)
>+ return 0;
>+
>+ if (!pmdemand_needs_update(state))
>+ return 0;
>+
>+ new_pmdemand_state = intel_atomic_get_pmdemand_state(state);
>+ if (IS_ERR(new_pmdemand_state))
>+ return PTR_ERR(new_pmdemand_state);
>+
>+ ret = intel_atomic_lock_global_state(&new_pmdemand_state->base);
>+ if (ret)
>+ return ret;
>+
>+ new_bw_state = intel_atomic_get_bw_state(state);
>+ if (IS_ERR(new_bw_state))
>+ return PTR_ERR(new_bw_state);
>+
>+ /* firmware will calculate the qclck_gc_index, requirement is set to 0 */
>+ new_pmdemand_state->params.qclk_gv_index = 0;
>+ new_pmdemand_state->params.qclk_gv_bw =
>+ min_t(u16, new_bw_state->qgv_point_peakbw, 0xffff);
>+
>+ new_dbuf_state = intel_atomic_get_dbuf_state(state);
>+ if (IS_ERR(new_dbuf_state))
>+ return PTR_ERR(new_dbuf_state);
>+
>+ new_pmdemand_state->params.active_pipes =
>+ min_t(u8, hweight8(new_dbuf_state->active_pipes), 3);
>+
>+ new_cdclk_state = intel_atomic_get_cdclk_state(state);
>+ if (IS_ERR(new_cdclk_state))
>+ return PTR_ERR(new_cdclk_state);
>+
>+ new_pmdemand_state->params.voltage_index =
>+ new_cdclk_state->logical.voltage_level;
>+ new_pmdemand_state->params.cdclk_freq_mhz =
>+ DIV_ROUND_UP(new_cdclk_state->logical.cdclk, 1000);
>+
>+ new_pmdemand_state->params.ddiclk_max =
>+ pmdemand_max_ddiclk(state, new_pmdemand_state);
>+
>+ new_pmdemand_state->params.active_phys =
>+ pmdemand_active_non_tc_phys(i915, state, new_pmdemand_state);
>+
>+ /*
>+ * Setting scalers to max as it can not be calculated during flips and
>+ * fastsets without taking global states locks.
>+ */
>+ new_pmdemand_state->params.scalers = 7;
>+
>+ ret = intel_atomic_serialize_global_state(&new_pmdemand_state->base);
>+ if (ret)
>+ return ret;
>+
>+ return 0;
>+}
>+
>+static bool intel_pmdemand_check_prev_transaction(struct drm_i915_private *i915)
>+{
>+ return !(intel_de_wait_for_clear(i915,
>+ XELPDP_INITIATE_PMDEMAND_REQUEST(1),
>+ XELPDP_PMDEMAND_REQ_ENABLE, 10) ||
>+ intel_de_wait_for_clear(i915,
>+ GEN12_DCPR_STATUS_1,
>+ XELPDP_PMDEMAND_INFLIGHT_STATUS, 10));
>+}
>+
>+static bool intel_pmdemand_req_complete(struct drm_i915_private *i915)
>+{
>+ return !(intel_de_read(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1)) &
>+ XELPDP_PMDEMAND_REQ_ENABLE);
>+}
>+
>+static int intel_pmdemand_wait(struct drm_i915_private *i915)
>+{
>+ DEFINE_WAIT(wait);
>+ int ret;
>+ const unsigned int timeout_ms = 10;
>+
>+ ret = wait_event_timeout(i915->display.pmdemand.waitqueue,
>+ intel_pmdemand_req_complete(i915),
>+ msecs_to_jiffies_timeout(timeout_ms));
>+ if (ret == 0)
>+ drm_err(&i915->drm,
>+ "timed out waiting for Punit PM Demand Response\n");
>+
>+ return ret;
>+}
>+
>+/* Required to be programmed during Display Init Sequences. */
>+void intel_program_dbuf_pmdemand(struct drm_i915_private *i915,
>+ u8 dbuf_slices)
>+{
>+ u32 dbufs = min_t(u32, hweight8(dbuf_slices), 3);
>+
>+ mutex_lock(&i915->display.pmdemand.lock);
>+ if (drm_WARN_ON(&i915->drm,
>+ !intel_pmdemand_check_prev_transaction(i915)))
>+ goto unlock;
>+
>+ intel_de_rmw(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(0),
>+ XELPDP_PMDEMAND_DBUFS_MASK, XELPDP_PMDEMAND_DBUFS(dbufs));
>+ intel_de_rmw(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1), 0,
>+ XELPDP_PMDEMAND_REQ_ENABLE);
>+
>+ intel_pmdemand_wait(i915);
>+
>+unlock:
>+ mutex_unlock(&i915->display.pmdemand.lock);
>+}
>+
>+static void update_pmdemand_values(const struct intel_pmdemand_state *new,
>+ const struct intel_pmdemand_state *old,
>+ u32 *reg1, u32 *reg2)
>+{
>+ u32 plls, tmp;
>+
>+ /*
>+ * The pmdemand parameter updates happens in two steps. Pre plane and
>+ * post plane updates. During the pre plane, as DE might still be
>+ * handling with some old operations, to avoid unwanted performance
>+ * issues, program the pmdemand parameters with higher of old and new
>+ * values. And then after once settled, use the new parameter values
>+ * as part of the post plane update.
>+ */
>+
>+ /* Set 1*/
>+ *reg1 &= ~XELPDP_PMDEMAND_QCLK_GV_BW_MASK;
>+ tmp = old ? max(old->params.qclk_gv_bw, new->params.qclk_gv_bw) :
>+ new->params.qclk_gv_bw;
>+ *reg1 |= XELPDP_PMDEMAND_QCLK_GV_BW(tmp);
>+
>+ *reg1 &= ~XELPDP_PMDEMAND_VOLTAGE_INDEX_MASK;
>+ tmp = old ? max(old->params.voltage_index, new->params.voltage_index) :
>+ new->params.voltage_index;
>+ *reg1 |= XELPDP_PMDEMAND_VOLTAGE_INDEX(tmp);
>+
>+ *reg1 &= ~XELPDP_PMDEMAND_QCLK_GV_INDEX_MASK;
>+ tmp = old ? max(old->params.qclk_gv_index, new->params.qclk_gv_index) :
>+ new->params.qclk_gv_index;
>+ *reg1 |= XELPDP_PMDEMAND_QCLK_GV_INDEX(tmp);
>+
>+ *reg1 &= ~XELPDP_PMDEMAND_PIPES_MASK;
>+ tmp = old ? max(old->params.active_pipes, new->params.active_pipes) :
>+ new->params.active_pipes;
>+ *reg1 |= XELPDP_PMDEMAND_PIPES(tmp);
>+
>+ *reg1 &= ~XELPDP_PMDEMAND_PHYS_MASK;
>+ plls = old ? max(old->params.active_phys, new->params.active_phys) :
>+ new->params.active_phys;
>+ plls = min_t(u32, plls, 7);
>+ *reg1 |= XELPDP_PMDEMAND_PHYS(plls);
>+
>+ /* Set 2*/
>+ *reg2 &= ~XELPDP_PMDEMAND_CDCLK_FREQ_MASK;
>+ tmp = old ? max(old->params.cdclk_freq_mhz,
>+ new->params.cdclk_freq_mhz) :
>+ new->params.cdclk_freq_mhz;
>+ *reg2 |= XELPDP_PMDEMAND_CDCLK_FREQ(tmp);
>+
>+ *reg2 &= ~XELPDP_PMDEMAND_DDICLK_FREQ_MASK;
>+ tmp = old ? max(old->params.ddiclk_max, new->params.ddiclk_max) :
>+ new->params.ddiclk_max;
>+ *reg2 |= XELPDP_PMDEMAND_DDICLK_FREQ(tmp);
>+
>+ *reg2 &= ~XELPDP_PMDEMAND_SCALERS_MASK;
>+ tmp = old ? max(old->params.scalers, new->params.scalers) :
>+ new->params.scalers;
>+ *reg2 |= XELPDP_PMDEMAND_SCALERS(tmp);
>+
>+ /*
>+ * Active_PLLs starts with 1 because of CDCLK PLL.
>+ * TODO: Missing to account genlock filter when it gets used.
>+ */
>+ plls = min_t(u32, plls + 1, 7);
>+ *reg2 &= ~XELPDP_PMDEMAND_PLLS_MASK;
>+ *reg2 |= XELPDP_PMDEMAND_PLLS(plls);
>+}
>+
>+static void intel_program_pmdemand(struct drm_i915_private *i915,
>+ const struct intel_pmdemand_state *new,
>+ const struct intel_pmdemand_state *old)
>+{
>+ bool changed = false;
>+ u32 reg1, mod_reg1;
>+ u32 reg2, mod_reg2;
>+
>+ mutex_lock(&i915->display.pmdemand.lock);
>+ if (drm_WARN_ON(&i915->drm,
>+ !intel_pmdemand_check_prev_transaction(i915)))
>+ goto unlock;
>+
>+ reg1 = intel_de_read(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(0));
>+ mod_reg1 = reg1;
>+
>+ reg2 = intel_de_read(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1));
>+ mod_reg2 = reg2;
>+
>+ update_pmdemand_values(new, old, &mod_reg1, &mod_reg2);
>+
>+ if (reg1 != mod_reg1) {
>+ intel_de_write(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(0),
>+ mod_reg1);
>+ changed = true;
>+ }
>+
>+ if (reg2 != mod_reg2) {
>+ intel_de_write(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1),
>+ mod_reg2);
>+ changed = true;
>+ }
>+
>+ /* Initiate pm demand request only if register values are changed */
>+ if (!changed)
>+ goto unlock;
>+
>+ drm_dbg_kms(&i915->drm,
>+ "initate pmdemand request values: (0x%x 0x%x)\n",
>+ mod_reg1, mod_reg2);
>+
>+ intel_de_rmw(i915, XELPDP_INITIATE_PMDEMAND_REQUEST(1), 0,
>+ XELPDP_PMDEMAND_REQ_ENABLE);
>+
>+ intel_pmdemand_wait(i915);
>+
>+unlock:
>+ mutex_unlock(&i915->display.pmdemand.lock);
>+}
>+
>+static bool
>+intel_pmdemand_state_changed(const struct intel_pmdemand_state *new,
>+ const struct intel_pmdemand_state *old)
>+{
>+ return memcmp(&new->params, &old->params, sizeof(new->params)) != 0;
This is much nicer to read now! Good call grouping the values in a
"params" member :-)
--
Gustavo Sousa
>+}
>+
>+void intel_pmdemand_pre_plane_update(struct intel_atomic_state *state)
>+{
>+ struct drm_i915_private *i915 = to_i915(state->base.dev);
>+ const struct intel_pmdemand_state *new_pmdmnd_state =
>+ intel_atomic_get_new_pmdemand_state(state);
>+ const struct intel_pmdemand_state *old_pmdmnd_state =
>+ intel_atomic_get_old_pmdemand_state(state);
>+
>+ if (DISPLAY_VER(i915) < 14)
>+ return;
>+
>+ if (!new_pmdmnd_state ||
>+ !intel_pmdemand_state_changed(new_pmdmnd_state, old_pmdmnd_state))
>+ return;
>+
>+ intel_program_pmdemand(i915, new_pmdmnd_state, old_pmdmnd_state);
>+}
>+
>+void intel_pmdemand_post_plane_update(struct intel_atomic_state *state)
>+{
>+ struct drm_i915_private *i915 = to_i915(state->base.dev);
>+ const struct intel_pmdemand_state *new_pmdmnd_state =
>+ intel_atomic_get_new_pmdemand_state(state);
>+ const struct intel_pmdemand_state *old_pmdmnd_state =
>+ intel_atomic_get_old_pmdemand_state(state);
>+
>+ if (DISPLAY_VER(i915) < 14)
>+ return;
>+
>+ if (!new_pmdmnd_state ||
>+ !intel_pmdemand_state_changed(new_pmdmnd_state, old_pmdmnd_state))
>+ return;
>+
>+ intel_program_pmdemand(i915, new_pmdmnd_state, NULL);
>+}
>diff --git a/drivers/gpu/drm/i915/display/intel_pmdemand.h b/drivers/gpu/drm/i915/display/intel_pmdemand.h
>new file mode 100644
>index 000000000000..2883b5d97a44
>--- /dev/null
>+++ b/drivers/gpu/drm/i915/display/intel_pmdemand.h
>@@ -0,0 +1,24 @@
>+/* SPDX-License-Identifier: MIT */
>+/*
>+ * Copyright © 2023 Intel Corporation
>+ */
>+
>+#ifndef __INTEL_PMDEMAND_H__
>+#define __INTEL_PMDEMAND_H__
>+
>+#include <linux/types.h>
>+
>+struct drm_i915_private;
>+struct intel_atomic_state;
>+struct intel_crtc_state;
>+struct intel_plane_state;
>+
>+void intel_pmdemand_init_early(struct drm_i915_private *i915);
>+int intel_pmdemand_init(struct drm_i915_private *i915);
>+void intel_program_dbuf_pmdemand(struct drm_i915_private *i915,
>+ u8 dbuf_slices);
>+void intel_pmdemand_pre_plane_update(struct intel_atomic_state *state);
>+void intel_pmdemand_post_plane_update(struct intel_atomic_state *state);
>+int intel_pmdemand_atomic_check(struct intel_atomic_state *state);
>+
>+#endif /* __INTEL_PMDEMAND_H__ */
>diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
>index 02b6cbb832e9..49459ab70dd1 100644
>--- a/drivers/gpu/drm/i915/i915_irq.c
>+++ b/drivers/gpu/drm/i915/i915_irq.c
>@@ -43,6 +43,7 @@
> #include "display/intel_gmbus.h"
> #include "display/intel_hotplug.h"
> #include "display/intel_lpe_audio.h"
>+#include "display/intel_pmdemand.h"
> #include "display/intel_psr.h"
> #include "display/intel_psr_regs.h"
>
>@@ -1981,12 +1982,27 @@ static u32 gen8_de_pipe_fault_mask(struct drm_i915_private *dev_priv)
> return GEN8_DE_PIPE_IRQ_FAULT_ERRORS;
> }
>
>+static void intel_pmdemand_irq_handler(struct drm_i915_private *dev_priv)
>+{
>+ wake_up_all(&dev_priv->display.pmdemand.waitqueue);
>+}
>+
> static void
> gen8_de_misc_irq_handler(struct drm_i915_private *dev_priv, u32 iir)
> {
> bool found = false;
>
>- if (iir & GEN8_DE_MISC_GSE) {
>+ if (DISPLAY_VER(dev_priv) >= 14) {
>+ if (iir & (XELPDP_PMDEMAND_RSP |
>+ XELPDP_PMDEMAND_RSPTOUT_ERR)) {
>+ if (iir & XELPDP_PMDEMAND_RSPTOUT_ERR)
>+ drm_dbg(&dev_priv->drm,
>+ "Error waiting for Punit PM Demand Response\n");
>+
>+ intel_pmdemand_irq_handler(dev_priv);
>+ found = true;
>+ }
>+ } else if (iir & GEN8_DE_MISC_GSE) {
> intel_opregion_asle_intr(dev_priv);
> found = true;
> }
>@@ -3737,7 +3753,10 @@ static void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
> if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv))
> de_port_masked |= BXT_DE_PORT_GMBUS;
>
>- if (DISPLAY_VER(dev_priv) >= 11) {
>+ if (DISPLAY_VER(dev_priv) >= 14)
>+ de_misc_masked |= XELPDP_PMDEMAND_RSPTOUT_ERR |
>+ XELPDP_PMDEMAND_RSP;
>+ else if (DISPLAY_VER(dev_priv) >= 11) {
> enum port port;
>
> if (intel_bios_is_dsi_present(dev_priv, &port))
>diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
>index 2a9ab8de8421..91fb12b65c92 100644
>--- a/drivers/gpu/drm/i915/i915_reg.h
>+++ b/drivers/gpu/drm/i915/i915_reg.h
>@@ -4450,8 +4450,10 @@
> #define GEN8_DE_MISC_IMR _MMIO(0x44464)
> #define GEN8_DE_MISC_IIR _MMIO(0x44468)
> #define GEN8_DE_MISC_IER _MMIO(0x4446c)
>-#define GEN8_DE_MISC_GSE (1 << 27)
>-#define GEN8_DE_EDP_PSR (1 << 19)
>+#define XELPDP_PMDEMAND_RSPTOUT_ERR REG_BIT(27)
>+#define GEN8_DE_MISC_GSE REG_BIT(27)
>+#define GEN8_DE_EDP_PSR REG_BIT(19)
>+#define XELPDP_PMDEMAND_RSP REG_BIT(3)
>
> #define GEN8_PCU_ISR _MMIO(0x444e0)
> #define GEN8_PCU_IMR _MMIO(0x444e4)
>@@ -4536,6 +4538,33 @@
> #define XELPDP_DP_ALT_HPD_LONG_DETECT REG_BIT(1)
> #define XELPDP_DP_ALT_HPD_SHORT_DETECT REG_BIT(0)
>
>+#define XELPDP_INITIATE_PMDEMAND_REQUEST(dword) _MMIO(0x45230 + 4 * (dword))
>+#define XELPDP_PMDEMAND_QCLK_GV_BW_MASK REG_GENMASK(31, 16)
>+#define XELPDP_PMDEMAND_QCLK_GV_BW(x) REG_FIELD_PREP(XELPDP_PMDEMAND_QCLK_GV_BW_MASK, x)
>+#define XELPDP_PMDEMAND_VOLTAGE_INDEX_MASK REG_GENMASK(14, 12)
>+#define XELPDP_PMDEMAND_VOLTAGE_INDEX(x) REG_FIELD_PREP(XELPDP_PMDEMAND_VOLTAGE_INDEX_MASK, x)
>+#define XELPDP_PMDEMAND_QCLK_GV_INDEX_MASK REG_GENMASK(11, 8)
>+#define XELPDP_PMDEMAND_QCLK_GV_INDEX(x) REG_FIELD_PREP(XELPDP_PMDEMAND_QCLK_GV_INDEX_MASK, x)
>+#define XELPDP_PMDEMAND_PIPES_MASK REG_GENMASK(7, 6)
>+#define XELPDP_PMDEMAND_PIPES(x) REG_FIELD_PREP(XELPDP_PMDEMAND_PIPES_MASK, x)
>+#define XELPDP_PMDEMAND_DBUFS_MASK REG_GENMASK(5, 4)
>+#define XELPDP_PMDEMAND_DBUFS(x) REG_FIELD_PREP(XELPDP_PMDEMAND_DBUFS_MASK, x)
>+#define XELPDP_PMDEMAND_PHYS_MASK REG_GENMASK(2, 0)
>+#define XELPDP_PMDEMAND_PHYS(x) REG_FIELD_PREP(XELPDP_PMDEMAND_PHYS_MASK, x)
>+
>+#define XELPDP_PMDEMAND_REQ_ENABLE REG_BIT(31)
>+#define XELPDP_PMDEMAND_CDCLK_FREQ_MASK REG_GENMASK(30, 20)
>+#define XELPDP_PMDEMAND_CDCLK_FREQ(x) REG_FIELD_PREP(XELPDP_PMDEMAND_CDCLK_FREQ_MASK, x)
>+#define XELPDP_PMDEMAND_DDICLK_FREQ_MASK REG_GENMASK(18, 8)
>+#define XELPDP_PMDEMAND_DDICLK_FREQ(x) REG_FIELD_PREP(XELPDP_PMDEMAND_DDICLK_FREQ_MASK, x)
>+#define XELPDP_PMDEMAND_SCALERS_MASK REG_GENMASK(6, 4)
>+#define XELPDP_PMDEMAND_SCALERS(x) REG_FIELD_PREP(XELPDP_PMDEMAND_SCALERS_MASK, x)
>+#define XELPDP_PMDEMAND_PLLS_MASK REG_GENMASK(2, 0)
>+#define XELPDP_PMDEMAND_PLLS(x) REG_FIELD_PREP(XELPDP_PMDEMAND_PLLS_MASK, x)
>+
>+#define GEN12_DCPR_STATUS_1 _MMIO(0x46440)
>+#define XELPDP_PMDEMAND_INFLIGHT_STATUS REG_BIT(26)
>+
> #define ILK_DISPLAY_CHICKEN2 _MMIO(0x42004)
> /* Required on all Ironlake and Sandybridge according to the B-Spec. */
> #define ILK_ELPIN_409_SELECT REG_BIT(25)
>@@ -4695,6 +4724,9 @@
> #define DCPR_SEND_RESP_IMM REG_BIT(25)
> #define DCPR_CLEAR_MEMSTAT_DIS REG_BIT(24)
>
>+#define XELPD_CHICKEN_DCPR_3 _MMIO(0x46438)
>+#define DMD_RSP_TIMEOUT_DISABLE REG_BIT(19)
>+
> #define SKL_DFSM _MMIO(0x51000)
> #define SKL_DFSM_DISPLAY_PM_DISABLE (1 << 27)
> #define SKL_DFSM_DISPLAY_HDCP_DISABLE (1 << 25)
>--
>2.34.1
>
More information about the Intel-gfx
mailing list