[Intel-gfx] [PATCH 5/5] drm/i915/dsi: Extract port_ctrl_reg()
Ville Syrjala
ville.syrjala at linux.intel.com
Wed Nov 1 11:42:12 UTC 2023
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
The code to determine the pre-ICL DSI port control register is
repeated several times. Consolidate.
vlv_dsi_clear_device_ready() is left with the open-coded version
due to the weirdness with port A vs. C on VLV/CHV.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/display/vlv_dsi.c | 17 ++++++++++-------
1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
index 64023fb8dd74..bda49734ca33 100644
--- a/drivers/gpu/drm/i915/display/vlv_dsi.c
+++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
@@ -561,6 +561,12 @@ static void glk_dsi_clear_device_ready(struct intel_encoder *encoder)
glk_dsi_disable_mipi_io(encoder);
}
+static i915_reg_t port_ctrl_reg(struct drm_i915_private *i915, enum port port)
+{
+ return IS_GEMINILAKE(i915) || IS_BROXTON(i915) ?
+ BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
+}
+
static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder)
{
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
@@ -627,8 +633,7 @@ static void intel_dsi_port_enable(struct intel_encoder *encoder,
}
for_each_dsi_port(port, intel_dsi->ports) {
- i915_reg_t port_ctrl = IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv) ?
- BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
+ i915_reg_t port_ctrl = port_ctrl_reg(dev_priv, port);
u32 temp;
temp = intel_de_read(dev_priv, port_ctrl);
@@ -664,8 +669,7 @@ static void intel_dsi_port_disable(struct intel_encoder *encoder)
enum port port;
for_each_dsi_port(port, intel_dsi->ports) {
- i915_reg_t port_ctrl = IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv) ?
- BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
+ i915_reg_t port_ctrl = port_ctrl_reg(dev_priv, port);
/* de-assert ip_tg_enable signal */
intel_de_rmw(dev_priv, port_ctrl, DPI_ENABLE, 0);
@@ -955,9 +959,8 @@ static bool intel_dsi_get_hw_state(struct intel_encoder *encoder,
/* XXX: this only works for one DSI output */
for_each_dsi_port(port, intel_dsi->ports) {
- i915_reg_t ctrl_reg = IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv) ?
- BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
- bool enabled = intel_de_read(dev_priv, ctrl_reg) & DPI_ENABLE;
+ i915_reg_t port_ctrl = port_ctrl_reg(dev_priv, port);
+ bool enabled = intel_de_read(dev_priv, port_ctrl) & DPI_ENABLE;
/*
* Due to some hardware limitations on VLV/CHV, the DPI enable
--
2.41.0
More information about the Intel-gfx
mailing list