[Intel-gfx] [PATCH v7 1/6] drm/panelreplay: dpcd register definition for panelreplay

[Jani Nikula]

On Wed, 11 Oct 2023, Animesh Manna <animesh.manna at intel.com> wrote:
> Add DPCD register definition for discovering, enabling and
> checking status of panel replay of the sink.
>
> Cc: Jouni Högander <jouni.hogander at intel.com>
> Cc: Arun R Murthy <arun.r.murthy at intel.com>
> Cc: Jani Nikula <jani.nikula at intel.com>
> Reviewed-by: Arun R Murthy <arun.r.murthy at intel.com>
> Signed-off-by: Animesh Manna <animesh.manna at intel.com>

Maarten, Maxime, Thomas -

Ack for merging this via drm-intel-next?

Thanks,
Jani.

> ---
>  include/drm/display/drm_dp.h | 23 +++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
>
> diff --git a/include/drm/display/drm_dp.h b/include/drm/display/drm_dp.h
> index e69cece404b3..fc42b622ef32 100644
> --- a/include/drm/display/drm_dp.h
> +++ b/include/drm/display/drm_dp.h
> @@ -543,6 +543,10 @@
>  /* DFP Capability Extension */
>  #define DP_DFP_CAPABILITY_EXTENSION_SUPPORT	0x0a3	/* 2.0 */
>  
> +#define DP_PANEL_REPLAY_CAP                 0x0b0  /* DP 2.0 */
> +# define DP_PANEL_REPLAY_SUPPORT            (1 << 0)
> +# define DP_PANEL_REPLAY_SU_SUPPORT         (1 << 1)
> +
>  /* Link Configuration */
>  #define	DP_LINK_BW_SET		            0x100
>  # define DP_LINK_RATE_TABLE		    0x00    /* eDP 1.4 */
> @@ -716,6 +720,13 @@
>  #define DP_BRANCH_DEVICE_CTRL		    0x1a1
>  # define DP_BRANCH_DEVICE_IRQ_HPD	    (1 << 0)
>  
> +#define PANEL_REPLAY_CONFIG                             0x1b0  /* DP 2.0 */
> +# define DP_PANEL_REPLAY_ENABLE                         (1 << 0)
> +# define DP_PANEL_REPLAY_UNRECOVERABLE_ERROR_EN         (1 << 3)
> +# define DP_PANEL_REPLAY_RFB_STORAGE_ERROR_EN           (1 << 4)
> +# define DP_PANEL_REPLAY_ACTIVE_FRAME_CRC_ERROR_EN      (1 << 5)
> +# define DP_PANEL_REPLAY_SU_ENABLE                      (1 << 6)
> +
>  #define DP_PAYLOAD_ALLOCATE_SET		    0x1c0
>  #define DP_PAYLOAD_ALLOCATE_START_TIME_SLOT 0x1c1
>  #define DP_PAYLOAD_ALLOCATE_TIME_SLOT_COUNT 0x1c2
> @@ -1105,6 +1116,18 @@
>  #define DP_LANE_ALIGN_STATUS_UPDATED_ESI       0x200e /* status same as 0x204 */
>  #define DP_SINK_STATUS_ESI                     0x200f /* status same as 0x205 */
>  
> +#define DP_PANEL_REPLAY_ERROR_STATUS                   0x2020  /* DP 2.1*/
> +# define DP_PANEL_REPLAY_LINK_CRC_ERROR                (1 << 0)
> +# define DP_PANEL_REPLAY_RFB_STORAGE_ERROR             (1 << 1)
> +# define DP_PANEL_REPLAY_VSC_SDP_UNCORRECTABLE_ERROR   (1 << 2)
> +
> +#define DP_SINK_DEVICE_PR_AND_FRAME_LOCK_STATUS        0x2022  /* DP 2.1 */
> +# define DP_SINK_DEVICE_PANEL_REPLAY_STATUS_MASK       (7 << 0)
> +# define DP_SINK_FRAME_LOCKED_SHIFT                    3
> +# define DP_SINK_FRAME_LOCKED_MASK                     (3 << 3)
> +# define DP_SINK_FRAME_LOCKED_STATUS_VALID_SHIFT       5
> +# define DP_SINK_FRAME_LOCKED_STATUS_VALID_MASK        (1 << 5)
> +
>  /* Extended Receiver Capability: See DP_DPCD_REV for definitions */
>  #define DP_DP13_DPCD_REV                    0x2200

-- 
Jani Nikula, Intel