[Intel-gfx] [RFC 2/3] drm/i915: Add Enable/Disable for CMRR based on VRR state
Golani, Mitulkumar Ajitkumar
mitulkumar.ajitkumar.golani at intel.com
Wed Nov 15 13:51:04 UTC 2023
Thanks @Jani Nikula
Addressed all review comments.
Regards,
Mitul
> -----Original Message-----
> From: Jani Nikula <jani.nikula at linux.intel.com>
> Sent: Wednesday, November 15, 2023 2:25 PM
> To: Golani, Mitulkumar Ajitkumar <mitulkumar.ajitkumar.golani at intel.com>;
> intel-gfx at lists.freedesktop.org
> Cc: Syrjala, Ville <ville.syrjala at intel.com>
> Subject: Re: [Intel-gfx] [RFC 2/3] drm/i915: Add Enable/Disable for CMRR
> based on VRR state
>
> On Wed, 15 Nov 2023, Mitul Golani
> <mitulkumar.ajitkumar.golani at intel.com> wrote:
> > Add CMRR/Fixed Average Vtotal mode enable and disable functions based
> > on change in VRR mode of operation.
> > When Adaptive Sync Vtotal is enabled, Fixed Average Vtotal mode is
> > disabled and vice versa. With this commit setting the stage for
> > subsequent CMRR enablement.
> >
> > Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani at intel.com>
> > ---
> > .../drm/i915/display/intel_crtc_state_dump.c | 4 +-
> > drivers/gpu/drm/i915/display/intel_display.c | 24 ++++++++++--
> > drivers/gpu/drm/i915/display/intel_vrr.c | 37 +++++++++++++------
> > 3 files changed, 48 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_crtc_state_dump.c
> > b/drivers/gpu/drm/i915/display/intel_crtc_state_dump.c
> > index 2d15e82c0b3d..908a4c4ccb00 100644
> > --- a/drivers/gpu/drm/i915/display/intel_crtc_state_dump.c
> > +++ b/drivers/gpu/drm/i915/display/intel_crtc_state_dump.c
> > @@ -299,7 +299,9 @@ void intel_crtc_state_dump(const struct
> intel_crtc_state *pipe_config,
> > intel_dump_buffer(i915, "ELD: ", pipe_config->eld,
> > drm_eld_size(pipe_config->eld));
> >
> > - drm_dbg_kms(&i915->drm, "vrr: %s, vmin: %d, vmax: %d, pipeline
> full: %d, guardband: %d flipline: %d, vmin vblank: %d, vmax vblank: %d\n",
> > + drm_dbg_kms(&i915->drm,
> > + "cmrr: %s, vrr: %s, vmin: %d, vmax: %d, pipeline full: %d,
> guardband: %d, flipline: %d, vmin vblank: %d, vmax vblank: %d\n",
> > + str_yes_no(pipe_config->cmrr.enable),
> > str_yes_no(pipe_config->vrr.enable),
> > pipe_config->vrr.vmin, pipe_config->vrr.vmax,
> > pipe_config->vrr.pipeline_full, pipe_config-
> >vrr.guardband,
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c
> > b/drivers/gpu/drm/i915/display/intel_display.c
> > index f99d2de840bc..f5a69309e65a 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -937,6 +937,12 @@ static bool vrr_enabling(const struct
> intel_crtc_state *old_crtc_state,
> > vrr_params_changed(old_crtc_state, new_crtc_state))); }
> >
> > +static bool cmrr_enabling(const struct intel_crtc_state *old_crtc_state,
> > + const struct intel_crtc_state *new_crtc_state) {
> > + return is_enabling(cmrr.enable, old_crtc_state, new_crtc_state); }
> > +
> > static bool vrr_disabling(const struct intel_crtc_state *old_crtc_state,
> > const struct intel_crtc_state *new_crtc_state) { @@
> -946,6
> > +952,12 @@ static bool vrr_disabling(const struct intel_crtc_state
> *old_crtc_state,
> > vrr_params_changed(old_crtc_state, new_crtc_state))); }
> >
> > +static bool cmrr_disabling(const struct intel_crtc_state *old_crtc_state,
> > + const struct intel_crtc_state *new_crtc_state) {
> > + return is_disabling(cmrr.enable, old_crtc_state, new_crtc_state); }
> > +
>
> See
> https://patchwork.freedesktop.org/patch/msgid/20231106211915.13406-2-
> ville.syrjala at linux.intel.com
>
> > #undef is_disabling
> > #undef is_enabling
> >
> > @@ -1064,7 +1076,8 @@ static void intel_pre_plane_update(struct
> intel_atomic_state *state,
> > intel_atomic_get_new_crtc_state(state, crtc);
> > enum pipe pipe = crtc->pipe;
> >
> > - if (vrr_disabling(old_crtc_state, new_crtc_state)) {
> > + if (vrr_disabling(old_crtc_state, new_crtc_state) ||
> > + cmrr_disabling(old_crtc_state, new_crtc_state)) {
> > intel_vrr_disable(old_crtc_state);
> > intel_crtc_update_active_timings(old_crtc_state, false);
> > }
> > @@ -6754,7 +6767,8 @@ static void commit_pipe_post_planes(struct
> intel_atomic_state *state,
> > !intel_crtc_needs_modeset(new_crtc_state))
> > skl_detach_scalers(new_crtc_state);
> >
> > - if (vrr_enabling(old_crtc_state, new_crtc_state))
> > + if (vrr_enabling(old_crtc_state, new_crtc_state) ||
> > + cmrr_enabling(old_crtc_state, new_crtc_state))
> > intel_vrr_enable(new_crtc_state);
> > }
> >
> > @@ -6851,9 +6865,11 @@ static void intel_update_crtc(struct
> intel_atomic_state *state,
> > * FIXME Should be synchronized with the start of vblank somehow...
> > */
> > if (vrr_enabling(old_crtc_state, new_crtc_state) ||
> > - new_crtc_state->update_m_n || new_crtc_state->update_lrr)
> > + new_crtc_state->update_m_n || new_crtc_state->update_lrr ||
> > + cmrr_enabling(old_crtc_state, new_crtc_state))
> > intel_crtc_update_active_timings(new_crtc_state,
> > - new_crtc_state->vrr.enable);
> > + new_crtc_state->vrr.enable |
> > + new_crtc_state-
> >cmrr.enable);
>
> Please don't use bitwise OR on booleans.
>
> >
> > /*
> > * We usually enable FIFO underrun interrupts as part of the diff
> > --git a/drivers/gpu/drm/i915/display/intel_vrr.c
> > b/drivers/gpu/drm/i915/display/intel_vrr.c
> > index 4aeccbbf1d2a..1e33661062b3 100644
> > --- a/drivers/gpu/drm/i915/display/intel_vrr.c
> > +++ b/drivers/gpu/drm/i915/display/intel_vrr.c
> > @@ -224,7 +224,7 @@ void intel_vrr_send_push(const struct
> intel_crtc_state *crtc_state)
> > struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> >
> > - if (!crtc_state->vrr.enable)
> > + if (!(crtc_state->vrr.enable | crtc_state->cmrr.enable))
>
> Please don't use bitwise OR on booleans.
>
> > return;
> >
> > intel_de_write(dev_priv, TRANS_PUSH(cpu_transcoder), @@ -237,7
> > +237,7 @@ bool intel_vrr_is_push_sent(const struct intel_crtc_state
> *crtc_state)
> > struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> >
> > - if (!crtc_state->vrr.enable)
> > + if (!(crtc_state->vrr.enable | crtc_state->cmrr.enable))
>
> Please don't use bitwise OR on booleans.
>
> > return false;
> >
> > return intel_de_read(dev_priv, TRANS_PUSH(cpu_transcoder)) &
> > TRANS_PUSH_SEND; @@ -245,15 +245,30 @@ bool
> > intel_vrr_is_push_sent(const struct intel_crtc_state *crtc_state)
> >
> > void intel_vrr_enable(const struct intel_crtc_state *crtc_state) {
> > - struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc-
> >dev);
> > + struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
>
> Unrelated change.
>
> > enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
> >
> > - if (!crtc_state->vrr.enable)
> > - return;
> >
> > - intel_de_write(dev_priv, TRANS_PUSH(cpu_transcoder),
> TRANS_PUSH_EN);
> > - intel_de_write(dev_priv, TRANS_VRR_CTL(cpu_transcoder),
> > - VRR_CTL_VRR_ENABLE | trans_vrr_ctl(crtc_state));
> > + if (!crtc_state->cmrr.enable && !crtc_state->vrr.enable) {
> > + return;
> > + } else if (crtc_state->vrr.enable && crtc_state->cmrr.enable) {
> > + drm_WARN_ON(&dev_priv->drm, crtc_state->vrr.enable &&
> > + crtc_state->cmrr.enable);
>
> Please don't duplicate the if and the drm_WARN_ON() conditions. You'll
> want to do this as the first thing with and early return:
>
> if (drm_WARN_ON(...))
> return;
>
> Then you can have two independent blocks:
>
> if (crtc_state->vrr.enable)
> // handle vrr
>
> if (crtc_state->cmrr.enable)
> // handle cmmr
>
> And you can remove the whole complicated if-ladder.
>
> > + } else {
> > + if (!crtc_state->vrr.enable && crtc_state->cmrr.enable) {
> > + intel_de_write(dev_priv,
> > + TRANS_PUSH(cpu_transcoder),
> TRANS_PUSH_EN);
> > + intel_de_write(dev_priv,
> TRANS_VRR_CTL(cpu_transcoder),
> > + VRR_CTL_VRR_ENABLE |
> VRR_CTL_CMRR_ENABLE |
> > + trans_vrr_ctl(crtc_state));
> > + } else {
> > + intel_de_write(dev_priv,
> > + TRANS_PUSH(cpu_transcoder),
> TRANS_PUSH_EN);
> > + intel_de_write(dev_priv,
> TRANS_VRR_CTL(cpu_transcoder),
> > + VRR_CTL_VRR_ENABLE |
> trans_vrr_ctl(crtc_state));
> > + }
> > + }
> > }
> >
> > void intel_vrr_disable(const struct intel_crtc_state *old_crtc_state)
> > @@ -262,7 +277,7 @@ void intel_vrr_disable(const struct intel_crtc_state
> *old_crtc_state)
> > struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder;
> >
> > - if (!old_crtc_state->vrr.enable)
> > + if (!(old_crtc_state->vrr.enable | old_crtc_state->cmrr.enable))
>
> Please don't use bitwise OR on booleans.
>
> > return;
> >
> > intel_de_write(dev_priv, TRANS_VRR_CTL(cpu_transcoder), @@ -
> 280,8
> > +295,6 @@ void intel_vrr_get_config(struct intel_crtc_state
> > *crtc_state)
> >
> > trans_vrr_ctl = intel_de_read(dev_priv,
> > TRANS_VRR_CTL(cpu_transcoder));
> >
> > - crtc_state->vrr.enable = trans_vrr_ctl & VRR_CTL_VRR_ENABLE;
> > -
>
> Huh?
>
> > if (crtc_state->cmrr.enable) {
> > cmrr_n_hi = intel_de_read(dev_priv,
> TRANS_CMRR_N_HI(cpu_transcoder));
> > cmrr_n_lo = intel_de_read(dev_priv,
> > TRANS_CMRR_N_LO(cpu_transcoder)); @@ -306,6 +319,6 @@ void
> intel_vrr_get_config(struct intel_crtc_state *crtc_state)
> > crtc_state->vrr.vmin = intel_de_read(dev_priv,
> TRANS_VRR_VMIN(cpu_transcoder)) + 1;
> > }
> >
> > - if (crtc_state->vrr.enable)
> > + if (crtc_state->vrr.enable | crtc_state->cmrr.enable)
>
> Please don't use bitwise OR on booleans.
>
> > crtc_state->mode_flags |= I915_MODE_FLAG_VRR; }
>
> --
> Jani Nikula, Intel
More information about the Intel-gfx
mailing list