[Intel-gfx] [PATCH 1/4] drm/i915/dsb: Allocate command buffer from local memory

Ville Syrjala ville.syrjala at linux.intel.com
Mon Oct 9 13:22:01 UTC 2023


From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Using system memory for the DSB command buffer doesn't appear to work.
On DG2 it seems like the hardware internally replaces the actual memory
reads with zeroes, and so we end up executing a bunch of NOOPs instead
of whatever commands we put in the buffer. To determine that I measured
the time it takes to execute the instructions, and the results are
always more or less consistent with executing a buffer full of NOOPs
from local memory.

Another theory I considered was some kind of cache coherency issue.
Looks like i915_gem_object_pin_map_unlocked() will in fact give you a
WB mapping for system memory on DGFX regardless of what mapping mode
was requested (WC in case of the DSB code). But clflush did not
change the behaviour at all, so that theory seems moot.

On DG1 it looks like the hardware might actually be fetching data from
system memory as the logs indicate that we just get underruns. But that
is equally bad, so doens't look like we can really use system memory on
DG1 either.

Thus always allocate the DSB command buffer from local memory on
discrete GPUs.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_dsb.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dsb.c b/drivers/gpu/drm/i915/display/intel_dsb.c
index 3e32aa49b8eb..7410ba3126f9 100644
--- a/drivers/gpu/drm/i915/display/intel_dsb.c
+++ b/drivers/gpu/drm/i915/display/intel_dsb.c
@@ -5,6 +5,7 @@
  */
 
 #include "gem/i915_gem_internal.h"
+#include "gem/i915_gem_lmem.h"
 
 #include "i915_drv.h"
 #include "i915_irq.h"
@@ -461,7 +462,11 @@ struct intel_dsb *intel_dsb_prepare(const struct intel_crtc_state *crtc_state,
 	/* ~1 qword per instruction, full cachelines */
 	size = ALIGN(max_cmds * 8, CACHELINE_BYTES);
 
-	obj = i915_gem_object_create_internal(i915, PAGE_ALIGN(size));
+	if (HAS_LMEM(i915))
+		obj = i915_gem_object_create_lmem(i915, PAGE_ALIGN(size),
+						  I915_BO_ALLOC_CONTIGUOUS);
+	else
+		obj = i915_gem_object_create_internal(i915, PAGE_ALIGN(size));
 	if (IS_ERR(obj))
 		goto out_put_rpm;
 
-- 
2.41.0



More information about the Intel-gfx mailing list