[Intel-gfx] [PATCH 19/19] drm/i915/dp: Remove unused DSC caps from intel_dp

[Lisovskiy, Stanislav]

On Fri, Oct 06, 2023 at 04:37:27PM +0300, Imre Deak wrote:
> The previous patches converted all users of the DSC DPCD caps to look
> these up from the connector, so remove the version stored in intel_dp.
> 
> A follow-up patchset will read out the MST connector specific
> capabilities in intel_dp_add_mst_connector() ->
> intel_dp_mst_read_decompression_port_dsc_caps().
> 
> Signed-off-by: Imre Deak <imre.deak at intel.com>

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>

> ---
>  drivers/gpu/drm/i915/display/intel_display_types.h |  2 --
>  drivers/gpu/drm/i915/display/intel_dp.c            | 14 --------------
>  2 files changed, 16 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
> index d6600079bcf74..65ea37fe8cff3 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_types.h
> +++ b/drivers/gpu/drm/i915/display/intel_display_types.h
> @@ -1725,10 +1725,8 @@ struct intel_dp {
>  	u8 psr_dpcd[EDP_PSR_RECEIVER_CAP_SIZE];
>  	u8 downstream_ports[DP_MAX_DOWNSTREAM_PORTS];
>  	u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE];
> -	u8 dsc_dpcd[DP_DSC_RECEIVER_CAP_SIZE];
>  	u8 lttpr_common_caps[DP_LTTPR_COMMON_CAP_SIZE];
>  	u8 lttpr_phy_caps[DP_MAX_LTTPR_COUNT][DP_LTTPR_PHY_CAP_SIZE];
> -	u8 fec_capable;
>  	u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE];
>  	/* source rates */
>  	int num_source_rates;
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index f58940c1baf9c..9d504ce2b54a7 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -3514,15 +3514,6 @@ void intel_dp_get_dsc_sink_cap(u8 dpcd_rev, struct intel_dp *intel_dp,
>  		drm_dbg_kms(&i915->drm, "FEC CAPABILITY: %x\n",
>  			    connector->dp.fec_capability);
>  	}
> -
> -	/*
> -	 * TODO: remove the following intel_dp copies once all users
> -	 * are converted to look up DSC DPCD/FEC capability via the
> -	 * connector.
> -	 */
> -	memcpy(intel_dp->dsc_dpcd, connector->dp.dsc_dpcd,
> -	       sizeof(intel_dp->dsc_dpcd));
> -	intel_dp->fec_capable = connector->dp.fec_capability;
>  }
>  
>  static void intel_edp_mso_mode_fixup(struct intel_connector *connector,
> @@ -5390,11 +5381,6 @@ intel_dp_detect(struct drm_connector *connector,
>  
>  	if (status == connector_status_disconnected) {
>  		memset(&intel_dp->compliance, 0, sizeof(intel_dp->compliance));
> -		/*
> -		 * TODO: Remove clearing the DPCD in intel_dp, once all
> -		 * user are converted to using the DPCD in connector.
> -		 */
> -		memset(intel_dp->dsc_dpcd, 0, sizeof(intel_dp->dsc_dpcd));
>  		memset(intel_connector->dp.dsc_dpcd, 0, sizeof(intel_connector->dp.dsc_dpcd));
>  
>  		if (intel_dp->is_mst) {
> -- 
> 2.39.2
>