[Intel-gfx] [PATCH] drm/i915/cx0: Only clear/set the Pipe Reset bit of the PHY Lanes Owned
Sripada, Radhakrishna
radhakrishna.sripada at intel.com
Wed Oct 11 20:32:08 UTC 2023
Fixes: 619a06dba6fa ("drm/i915/mtl: Reset only one lane in case of MFD")
With that pushed the patch with mentioned nits. Thank you for the patch and review.
-- Radhakrishna Sripada
> -----Original Message-----
> From: Intel-gfx <intel-gfx-bounces at lists.freedesktop.org> On Behalf Of Jani
> Nikula
> Sent: Thursday, October 5, 2023 6:47 PM
> To: Sousa, Gustavo <gustavo.sousa at intel.com>; Almahallawy, Khaled
> <khaled.almahallawy at intel.com>; intel-gfx at lists.freedesktop.org
> Subject: Re: [Intel-gfx] [PATCH] drm/i915/cx0: Only clear/set the Pipe Reset bit of
> the PHY Lanes Owned
>
> On Thu, 05 Oct 2023, Gustavo Sousa <gustavo.sousa at intel.com> wrote:
> > Quoting Khaled Almahallawy (2023-10-04 21:13:10-03:00)
> >>Currently, with MFD/pin assignment D, the driver clears the pipe reset bit
> >>of lane 1 which is not owned by display. This causes the display
> >>to block S0iX.
> >>
> >>By not clearing this bit for lane 1 and keeping whatever default, S0ix
> >>started to work. This is already what the driver does at the end
> >>of the phy lane reset sequence (Step#8)
> >>
> >>Bspec: 65451
> >>
> >
> > We should not have blank lines in the trailers section. This could be fixed
> > while applying.
>
> Agreed.
>
> >
> >>Cc: Mika Kahola <mika.kahola at intel.com>
> >>Cc: Gustavo Sousa <gustavo.sousa at intel.com>
> >>Signed-off-by: Khaled Almahallawy <khaled.almahallawy at intel.com>
> >
> > Nice fix. Thanks!
> >
> > Reviewed-by: Gustavo Sousa <gustavo.sousa at intel.com>
> >
> >>---
> >> drivers/gpu/drm/i915/display/intel_cx0_phy.c | 3 +--
> >> 1 file changed, 1 insertion(+), 2 deletions(-)
> >>
> >>diff --git a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> >>index abd607b564f1..f653b83a7d4f 100644
> >>--- a/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> >>+++ b/drivers/gpu/drm/i915/display/intel_cx0_phy.c
> >>@@ -2596,8 +2596,7 @@ static void intel_cx0_phy_lane_reset(struct
> drm_i915_private *i915,
> >> drm_warn(&i915->drm, "PHY %c failed to bring out of SOC reset after
> %dus.\n",
> >> phy_name(phy),
> XELPDP_PORT_BUF_SOC_READY_TIMEOUT_US);
> >>
> >>- intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port),
> >>- XELPDP_LANE_PIPE_RESET(0) | XELPDP_LANE_PIPE_RESET(1),
> >>+ intel_de_rmw(i915, XELPDP_PORT_BUF_CTL2(port), lane_pipe_reset,
> >> lane_pipe_reset);
> >>
> >> if (__intel_de_wait_for_register(i915, XELPDP_PORT_BUF_CTL2(port),
> >>--
> >>2.25.1
> >>
>
> --
> Jani Nikula, Intel
More information about the Intel-gfx
mailing list