[Intel-gfx] [PATCH 11/29] drm/i915/dp: Pass actual BW overhead to m_n calculation

Lisovskiy, Stanislav stanislav.lisovskiy at intel.com
Tue Oct 24 17:28:18 UTC 2023


On Tue, Oct 24, 2023 at 04:09:07AM +0300, Imre Deak wrote:
> A follow-up MST patch will need to specify the total BW allocation
> overhead, prepare for that here by passing the amount of overhead
> to intel_link_compute_m_n(), keeping the existing behavior.
> 
> Signed-off-by: Imre Deak <imre.deak at intel.com>

Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>

> ---
>  drivers/gpu/drm/i915/display/intel_display.c | 40 +++++++++++++++++---
>  drivers/gpu/drm/i915/display/intel_display.h |  4 +-
>  drivers/gpu/drm/i915/display/intel_dp.c      | 30 ++++++++++++---
>  drivers/gpu/drm/i915/display/intel_dp.h      |  2 +
>  drivers/gpu/drm/i915/display/intel_dp_mst.c  |  8 ++--
>  drivers/gpu/drm/i915/display/intel_fdi.c     |  5 ++-
>  6 files changed, 71 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 28d85e1e858ea..de352d9c43439 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -2396,17 +2396,45 @@ static void compute_m_n(u32 *ret_m, u32 *ret_n,
>  	intel_reduce_m_n_ratio(ret_m, ret_n);
>  }
>  
> +static void
> +add_bw_alloc_overhead(int link_clock, int bw_overhead,
> +		      int pixel_data_rate, int link_data_rate,
> +		      u32 *data_m, u32 *data_n)
> +{
> +	bool is_uhbr = intel_dp_is_uhbr_rate(link_clock);
> +	int ch_coding_efficiency =
> +		drm_dp_bw_channel_coding_efficiency(is_uhbr);
> +
> +	/*
> +	 * TODO: adjust for actual UHBR channel coding efficiency and BW
> +	 * overhead.
> +	 */
> +	if (is_uhbr) {
> +		*data_m = pixel_data_rate;
> +		*data_n = link_data_rate * 8 / 10;
> +		return;
> +	}
> +
> +	*data_m = DIV_ROUND_UP_ULL(mul_u32_u32(pixel_data_rate, bw_overhead),
> +				   1000000);
> +	*data_n = DIV_ROUND_DOWN_ULL(mul_u32_u32(link_data_rate, ch_coding_efficiency),
> +				     1000000);
> +}
> +
>  void
>  intel_link_compute_m_n(u16 bits_per_pixel, int nlanes,
>  		       int pixel_clock, int link_clock,
> -		       struct intel_link_m_n *m_n,
> -		       bool fec_enable)
> +		       int bw_overhead,
> +		       struct intel_link_m_n *m_n)
>  {
>  	u32 data_clock = bits_per_pixel * pixel_clock;
> +	u32 data_m;
> +	u32 data_n;
>  
> -	if (fec_enable)
> -		data_clock = intel_dp_mode_to_fec_clock(data_clock);
> -
> +	add_bw_alloc_overhead(link_clock, bw_overhead,
> +			      data_clock,
> +			      link_clock * 10 * nlanes,
> +			      &data_m, &data_n);
>  	/*
>  	 * Windows/BIOS uses fixed M/N values always. Follow suit.
>  	 *
> @@ -2416,7 +2444,7 @@ intel_link_compute_m_n(u16 bits_per_pixel, int nlanes,
>  	 */
>  	m_n->tu = 64;
>  	compute_m_n(&m_n->data_m, &m_n->data_n,
> -		    data_clock, link_clock * nlanes * 8,
> +		    data_m, data_n,
>  		    0x8000000);
>  
>  	compute_m_n(&m_n->link_m, &m_n->link_n,
> diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> index 0e5dffe8f0189..dea3202849e72 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.h
> +++ b/drivers/gpu/drm/i915/display/intel_display.h
> @@ -395,8 +395,8 @@ u8 intel_calc_active_pipes(struct intel_atomic_state *state,
>  			   u8 active_pipes);
>  void intel_link_compute_m_n(u16 bpp, int nlanes,
>  			    int pixel_clock, int link_clock,
> -			    struct intel_link_m_n *m_n,
> -			    bool fec_enable);
> +			    int bw_overhead,
> +			    struct intel_link_m_n *m_n);
>  u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
>  			      u32 pixel_format, u64 modifier);
>  enum drm_mode_status
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 0c0f026fb3161..0235de5bb8cd1 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -121,10 +121,15 @@ bool intel_dp_is_edp(struct intel_dp *intel_dp)
>  
>  static void intel_dp_unset_edid(struct intel_dp *intel_dp);
>  
> +bool intel_dp_is_uhbr_rate(int rate)
> +{
> +	return rate >= 1000000;
> +}
> +
>  /* Is link rate UHBR and thus 128b/132b? */
>  bool intel_dp_is_uhbr(const struct intel_crtc_state *crtc_state)
>  {
> -	return crtc_state->port_clock >= 1000000;
> +	return intel_dp_is_uhbr_rate(crtc_state->port_clock);
>  }
>  
>  static void intel_dp_set_default_sink_rates(struct intel_dp *intel_dp)
> @@ -684,6 +689,20 @@ u32 intel_dp_mode_to_fec_clock(u32 mode_clock)
>  		       1000000U);
>  }
>  
> +int intel_dp_bw_fec_overhead(bool fec_enabled)
> +{
> +	/*
> +	 * TODO: Calculate the actual overhead for a given mode.
> +	 * The hard-coded 1/0.972261=2.853% overhead factor
> +	 * corresponds (for instance) to the 8b/10b DP FEC 2.4% +
> +	 * 0.453% DSC overhead. This is enough for a 3840 width mode,
> +	 * which has a DSC overhead of up to ~0.2%, but may not be
> +	 * enough for a 1024 width mode where this is ~0.8% (on a 4
> +	 * lane DP link, with 2 DSC slices and 8 bpp color depth).
> +	 */
> +	return fec_enabled ? DP_DSC_FEC_OVERHEAD_FACTOR : 1000000;
> +}
> +
>  static int
>  small_joiner_ram_size_bits(struct drm_i915_private *i915)
>  {
> @@ -2655,8 +2674,9 @@ intel_dp_drrs_compute_config(struct intel_connector *connector,
>  		pixel_clock /= pipe_config->splitter.link_count;
>  
>  	intel_link_compute_m_n(link_bpp, pipe_config->lane_count, pixel_clock,
> -			       pipe_config->port_clock, &pipe_config->dp_m2_n2,
> -			       pipe_config->fec_enable);
> +			       pipe_config->port_clock,
> +			       intel_dp_bw_fec_overhead(pipe_config->fec_enable),
> +			       &pipe_config->dp_m2_n2);
>  
>  	/* FIXME: abstract this better */
>  	if (pipe_config->splitter.enable)
> @@ -2837,8 +2857,8 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>  			       pipe_config->lane_count,
>  			       adjusted_mode->crtc_clock,
>  			       pipe_config->port_clock,
> -			       &pipe_config->dp_m_n,
> -			       pipe_config->fec_enable);
> +			       intel_dp_bw_fec_overhead(pipe_config->fec_enable),
> +			       &pipe_config->dp_m_n);
>  
>  	/* FIXME: abstract this better */
>  	if (pipe_config->splitter.enable)
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h
> index 0258580a6aadc..2080575fef69a 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.h
> +++ b/drivers/gpu/drm/i915/display/intel_dp.h
> @@ -77,6 +77,7 @@ void intel_dp_audio_compute_config(struct intel_encoder *encoder,
>  				   struct drm_connector_state *conn_state);
>  bool intel_dp_has_hdmi_sink(struct intel_dp *intel_dp);
>  bool intel_dp_is_edp(struct intel_dp *intel_dp);
> +bool intel_dp_is_uhbr_rate(int rate);
>  bool intel_dp_is_uhbr(const struct intel_crtc_state *crtc_state);
>  bool intel_dp_is_port_edp(struct drm_i915_private *dev_priv, enum port port);
>  enum irqreturn intel_dp_hpd_pulse(struct intel_digital_port *dig_port,
> @@ -137,6 +138,7 @@ static inline unsigned int intel_dp_unused_lane_mask(int lane_count)
>  }
>  
>  u32 intel_dp_mode_to_fec_clock(u32 mode_clock);
> +int intel_dp_bw_fec_overhead(bool fec_enabled);
>  
>  bool intel_dp_supports_fec(struct intel_dp *intel_dp,
>  			   const struct intel_connector *connector,
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index 98d775d862ac4..da496f383f163 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -172,8 +172,8 @@ static int intel_dp_mst_compute_link_config(struct intel_encoder *encoder,
>  			       crtc_state->lane_count,
>  			       adjusted_mode->crtc_clock,
>  			       crtc_state->port_clock,
> -			       &crtc_state->dp_m_n,
> -			       crtc_state->fec_enable);
> +			       intel_dp_bw_fec_overhead(crtc_state),
> +			       &crtc_state->dp_m_n);
>  	crtc_state->dp_m_n.tu = slots;
>  
>  	return 0;
> @@ -267,8 +267,8 @@ static int intel_dp_dsc_mst_compute_link_config(struct intel_encoder *encoder,
>  			       crtc_state->lane_count,
>  			       adjusted_mode->crtc_clock,
>  			       crtc_state->port_clock,
> -			       &crtc_state->dp_m_n,
> -			       crtc_state->fec_enable);
> +			       intel_dp_bw_fec_overhead(crtc_state),
> +			       &crtc_state->dp_m_n);
>  	crtc_state->dp_m_n.tu = slots;
>  
>  	return 0;
> diff --git a/drivers/gpu/drm/i915/display/intel_fdi.c b/drivers/gpu/drm/i915/display/intel_fdi.c
> index e6429dfebe159..1d87fbc1e8138 100644
> --- a/drivers/gpu/drm/i915/display/intel_fdi.c
> +++ b/drivers/gpu/drm/i915/display/intel_fdi.c
> @@ -10,6 +10,7 @@
>  #include "intel_crtc.h"
>  #include "intel_ddi.h"
>  #include "intel_de.h"
> +#include "intel_dp.h"
>  #include "intel_display_types.h"
>  #include "intel_fdi.h"
>  #include "intel_fdi_regs.h"
> @@ -339,7 +340,9 @@ int ilk_fdi_compute_config(struct intel_crtc *crtc,
>  	pipe_config->fdi_lanes = lane;
>  
>  	intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
> -			       link_bw, &pipe_config->fdi_m_n, false);
> +			       link_bw,
> +			       intel_dp_bw_fec_overhead(false),
> +			       &pipe_config->fdi_m_n);
>  
>  	return 0;
>  }
> -- 
> 2.39.2
> 


More information about the Intel-gfx mailing list