[Intel-gfx] [PATCH v3 10/25] drm/i915/fdi: Improve FDI BW sharing between pipe B and C
Imre Deak
imre.deak at intel.com
Tue Sep 19 17:45:05 UTC 2023
On Tue, Sep 19, 2023 at 06:35:30PM +0300, Ville Syrjälä wrote:
> On Sat, Sep 16, 2023 at 02:13:53AM +0300, Imre Deak wrote:
> > On Fri, Sep 15, 2023 at 10:31:05PM +0300, Ville Syrjälä wrote:
> > > On Thu, Sep 14, 2023 at 10:26:44PM +0300, Imre Deak wrote:
> > > > At the moment modesetting pipe C on IVB will fail if pipe B uses 4 FDI
> > > > lanes. Make the BW sharing more dynamic by trying to reduce pipe B's
> > > > link bpp in this case, until pipe B uses only up to 2 FDI lanes.
> > > >
> > > > For this instead of the encoder compute config retry loop - which
> > > > reduced link bpp only for the encoder's pipe - reduce the maximum link
> > > > bpp for pipe B/C as required after all CRTC states are computed and
> > > > recompute the CRTC states with the new bpp limit.
> > > >
> > > > v2:
> > > > - Don't assume that a CRTC is already in the atomic state, while
> > > > reducing its link bpp.
> > > > - Add DocBook description to intel_fdi_atomic_check_link().
> > > > v3:
> > > > - Enable BW management for FDI links in a separate patch. (Ville)
> > > >
> > > > Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> > > > Signed-off-by: Imre Deak <imre.deak at intel.com>
> > > > ---
> > > > drivers/gpu/drm/i915/display/g4x_hdmi.c | 6 +-
> > > > drivers/gpu/drm/i915/display/intel_crt.c | 7 ++
> > > > drivers/gpu/drm/i915/display/intel_display.c | 14 +---
> > > > drivers/gpu/drm/i915/display/intel_dp.c | 3 +-
> > > > drivers/gpu/drm/i915/display/intel_fdi.c | 87 +++++++++++++++-----
> > > > drivers/gpu/drm/i915/display/intel_fdi.h | 4 +
> > > > drivers/gpu/drm/i915/display/intel_link_bw.c | 7 +-
> > > > drivers/gpu/drm/i915/display/intel_lvds.c | 10 ++-
> > > > drivers/gpu/drm/i915/display/intel_sdvo.c | 10 ++-
> > > > 9 files changed, 107 insertions(+), 41 deletions(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/display/g4x_hdmi.c b/drivers/gpu/drm/i915/display/g4x_hdmi.c
> > > > index 634b14116d9dd..8b5d26cd3b85e 100644
> > > > --- a/drivers/gpu/drm/i915/display/g4x_hdmi.c
> > > > +++ b/drivers/gpu/drm/i915/display/g4x_hdmi.c
> > > > @@ -19,6 +19,7 @@
> > > > #include "intel_fifo_underrun.h"
> > > > #include "intel_hdmi.h"
> > > > #include "intel_hotplug.h"
> > > > +#include "intel_link_bw.h"
> > > > #include "intel_sdvo.h"
> > > > #include "vlv_sideband.h"
> > > >
> > > > @@ -133,8 +134,11 @@ static int g4x_hdmi_compute_config(struct intel_encoder *encoder,
> > > > struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
> > > > struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> > > >
> > > > - if (HAS_PCH_SPLIT(i915))
> > > > + if (HAS_PCH_SPLIT(i915)) {
> > > > crtc_state->has_pch_encoder = true;
> > > > + if (!intel_link_bw_compute_pipe_bpp(crtc_state))
> > > > + return -EINVAL;
> > > > + }
> > > >
> > > > if (IS_G4X(i915))
> > > > crtc_state->has_hdmi_sink = g4x_compute_has_hdmi_sink(state, crtc);
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_crt.c b/drivers/gpu/drm/i915/display/intel_crt.c
> > > > index f6df6c4fa72ef..7aa89d0fa3d6c 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_crt.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_crt.c
> > > > @@ -49,6 +49,7 @@
> > > > #include "intel_gmbus.h"
> > > > #include "intel_hotplug.h"
> > > > #include "intel_hotplug_irq.h"
> > > > +#include "intel_link_bw.h"
> > > > #include "intel_load_detect.h"
> > > > #include "intel_pch_display.h"
> > > > #include "intel_pch_refclk.h"
> > > > @@ -413,6 +414,9 @@ static int pch_crt_compute_config(struct intel_encoder *encoder,
> > > > return -EINVAL;
> > > >
> > > > pipe_config->has_pch_encoder = true;
> > > > + if (!intel_link_bw_compute_pipe_bpp(pipe_config))
> > > > + return -EINVAL;
> > > > +
> > > > pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
> > > >
> > > > return 0;
> > > > @@ -435,6 +439,9 @@ static int hsw_crt_compute_config(struct intel_encoder *encoder,
> > > > return -EINVAL;
> > > >
> > > > pipe_config->has_pch_encoder = true;
> > > > + if (!intel_link_bw_compute_pipe_bpp(pipe_config))
> > > > + return -EINVAL;
> > > > +
> > > > pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
> > > >
> > > > /* LPT FDI RX only supports 8bpc. */
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > > > index 29816153fdd59..aad16dcceb788 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > > > @@ -4607,7 +4607,6 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
> > > > struct drm_connector_state *connector_state;
> > > > int pipe_src_w, pipe_src_h;
> > > > int base_bpp, ret, i;
> > > > - bool retry = true;
> > > >
> > > > crtc_state->cpu_transcoder = (enum transcoder) crtc->pipe;
> > > >
> > > > @@ -4637,6 +4636,7 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
> > > > "[CRTC:%d:%s] Link bpp limited to " BPP_X16_FMT "\n",
> > > > crtc->base.base.id, crtc->base.name,
> > > > BPP_X16_ARGS(crtc_state->max_link_bpp_x16));
> > > > + crtc_state->bw_constrained = true;
> > > > }
> > > >
> > > > base_bpp = crtc_state->pipe_bpp;
> > > > @@ -4680,7 +4680,6 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
> > > > crtc_state->output_types |= BIT(encoder->type);
> > > > }
> > > >
> > > > -encoder_retry:
> > > > /* Ensure the port clock defaults are reset when retrying. */
> > > > crtc_state->port_clock = 0;
> > > > crtc_state->pixel_multiplier = 1;
> > > > @@ -4720,17 +4719,6 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
> > > > ret = intel_crtc_compute_config(state, crtc);
> > > > if (ret == -EDEADLK)
> > > > return ret;
> > > > - if (ret == -EAGAIN) {
> > > > - if (drm_WARN(&i915->drm, !retry,
> > > > - "[CRTC:%d:%s] loop in pipe configuration computation\n",
> > > > - crtc->base.base.id, crtc->base.name))
> > > > - return -EINVAL;
> > > > -
> > > > - drm_dbg_kms(&i915->drm, "[CRTC:%d:%s] bw constrained, retrying\n",
> > > > - crtc->base.base.id, crtc->base.name);
> > > > - retry = false;
> > > > - goto encoder_retry;
> > > > - }
> > > > if (ret < 0) {
> > > > drm_dbg_kms(&i915->drm, "[CRTC:%d:%s] config failure: %d\n",
> > > > crtc->base.base.id, crtc->base.name, ret);
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> > > > index d5e6813d36c8f..03010accc1c7f 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_dp.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> > > > @@ -2219,7 +2219,8 @@ intel_dp_compute_config_link_bpp_limits(struct intel_dp *intel_dp,
> > > > const struct intel_encoder *encoder = &dp_to_dig_port(intel_dp)->base;
> > > > int max_link_bpp_x16;
> > > >
> > > > - max_link_bpp_x16 = to_bpp_x16(limits->pipe.max_bpp);
> > > > + max_link_bpp_x16 = min(crtc_state->max_link_bpp_x16,
> > > > + to_bpp_x16(limits->pipe.max_bpp));
> > > >
> > > > if (!dsc) {
> > > > max_link_bpp_x16 = rounddown(max_link_bpp_x16, to_bpp_x16(2 * 3));
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_fdi.c b/drivers/gpu/drm/i915/display/intel_fdi.c
> > > > index 4d7d524c68017..ad01915a4a39b 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_fdi.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_fdi.c
> > > > @@ -13,6 +13,7 @@
> > > > #include "intel_display_types.h"
> > > > #include "intel_fdi.h"
> > > > #include "intel_fdi_regs.h"
> > > > +#include "intel_link_bw.h"
> > > >
> > > > struct intel_fdi_funcs {
> > > > void (*fdi_link_train)(struct intel_crtc *crtc,
> > > > @@ -129,13 +130,16 @@ static int pipe_required_fdi_lanes(struct intel_crtc_state *crtc_state)
> > > > }
> > > >
> > > > static int ilk_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
> > > > - struct intel_crtc_state *pipe_config)
> > > > + struct intel_crtc_state *pipe_config,
> > > > + enum pipe *pipe_to_reduce)
> > > > {
> > > > struct drm_i915_private *dev_priv = to_i915(dev);
> > > > struct drm_atomic_state *state = pipe_config->uapi.state;
> > > > struct intel_crtc *other_crtc;
> > > > struct intel_crtc_state *other_crtc_state;
> > > >
> > > > + *pipe_to_reduce = pipe;
> > > > +
> > > > drm_dbg_kms(&dev_priv->drm,
> > > > "checking fdi config on pipe %c, lanes %i\n",
> > > > pipe_name(pipe), pipe_config->fdi_lanes);
> > > > @@ -198,6 +202,9 @@ static int ilk_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
> > > > if (pipe_required_fdi_lanes(other_crtc_state) > 2) {
> > > > drm_dbg_kms(&dev_priv->drm,
> > > > "fdi link B uses too many lanes to enable link C\n");
> > > > +
> > > > + *pipe_to_reduce = PIPE_B;
> > > > +
> > > > return -EINVAL;
> > > > }
> > > > return 0;
> > > > @@ -238,10 +245,8 @@ int ilk_fdi_compute_config(struct intel_crtc *crtc,
> > > > struct drm_device *dev = crtc->base.dev;
> > > > struct drm_i915_private *i915 = to_i915(dev);
> > > > const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
> > > > - int lane, link_bw, fdi_dotclock, ret;
> > > > - bool needs_recompute = false;
> > > > + int lane, link_bw, fdi_dotclock;
> > > >
> > > > -retry:
> > > > /* FDI is a binary signal running at ~2.7GHz, encoding
> > > > * each output octet as 10 bits. The actual frequency
> > > > * is stored as a divider into a 100MHz clock, and the
> > > > @@ -261,25 +266,69 @@ int ilk_fdi_compute_config(struct intel_crtc *crtc,
> > > > intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
> > > > link_bw, &pipe_config->fdi_m_n, false);
> > > >
> > > > - ret = ilk_check_fdi_lanes(dev, crtc->pipe, pipe_config);
> > > > - if (ret == -EDEADLK)
> > > > + return 0;
> > > > +}
> > > > +
> > > > +static int intel_fdi_atomic_check_bw(struct intel_atomic_state *state,
> > > > + struct intel_crtc *crtc,
> > > > + struct intel_crtc_state *pipe_config,
> > > > + struct intel_link_bw_limits *limits)
> > > > +{
> > > > + struct drm_i915_private *i915 = to_i915(crtc->base.dev);
> > > > + enum pipe pipe_to_reduce;
> > > > + int ret;
> > > > +
> > > > + ret = ilk_check_fdi_lanes(&i915->drm, crtc->pipe, pipe_config,
> > > > + &pipe_to_reduce);
> > > > + if (ret != -EINVAL)
> > > > return ret;
> > > >
> > > > - if (ret == -EINVAL && pipe_config->pipe_bpp > 6*3) {
> > > > - pipe_config->pipe_bpp -= 2*3;
> > > > - drm_dbg_kms(&i915->drm,
> > > > - "fdi link bw constraint, reducing pipe bpp to %i\n",
> > > > - pipe_config->pipe_bpp);
> > > > - needs_recompute = true;
> > > > - pipe_config->bw_constrained = true;
> > > > -
> > > > - goto retry;
> > > > + ret = intel_link_bw_reduce_bpp(state, limits,
> > > > + BIT(pipe_to_reduce),
> > > > + "FDI link BW");
> > > > +
> > > > + return ret ? : -EAGAIN;
> > > > +}
> > > > +
> > > > +/**
> > > > + * intel_fdi_atomic_check_link - check all modeset FDI link configuration
> > > > + * @state: intel atomic state
> > > > + * @limits: link BW limits
> > > > + *
> > > > + * Check the link configuration for all modeset FDI outputs. If the
> > > > + * configuration is invalid @limits will be updated if possible to
> > > > + * reduce the total BW, after which the configuration for all CRTCs in
> > > > + * @state must be recomputed with the updated @limits.
> > > > + *
> > > > + * Returns:
> > > > + * - 0 if the confugration is valid
> > > > + * - %-EAGAIN, if the configuration is invalid and @limits got updated
> > > > + * with fallback values with which the configuration of all CRTCs
> > > > + * in @state must be recomputed
> > > > + * - Other negative error, if the configuration is invalid without a
> > > > + * fallback possibility, or the check failed for another reason
> > > > + */
> > > > +int intel_fdi_atomic_check_link(struct intel_atomic_state *state,
> > > > + struct intel_link_bw_limits *limits)
> > > > +{
> > > > + struct intel_crtc *crtc;
> > > > + struct intel_crtc_state *crtc_state;
> > > > + int i;
> > > > +
> > > > + for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
> > > > + int ret;
> > > > +
> > > > + if (!crtc_state->has_pch_encoder ||
> > > > + !intel_crtc_needs_modeset(crtc_state) ||
> > > > + !crtc_state->hw.enable)
> > > > + continue;
> > > > +
> > > > + ret = intel_fdi_atomic_check_bw(state, crtc, crtc_state, limits);
> > > > + if (ret)
> > > > + return ret;
> > > > }
> > > >
> > > > - if (needs_recompute)
> > > > - return -EAGAIN;
> > > > -
> > > > - return ret;
> > > > + return 0;
> > > > }
> > > >
> > > > static void cpt_set_fdi_bc_bifurcation(struct drm_i915_private *dev_priv, bool enable)
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_fdi.h b/drivers/gpu/drm/i915/display/intel_fdi.h
> > > > index 1cdb86172702f..129444c580f27 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_fdi.h
> > > > +++ b/drivers/gpu/drm/i915/display/intel_fdi.h
> > > > @@ -8,14 +8,18 @@
> > > >
> > > > enum pipe;
> > > > struct drm_i915_private;
> > > > +struct intel_atomic_state;
> > > > struct intel_crtc;
> > > > struct intel_crtc_state;
> > > > struct intel_encoder;
> > > > +struct intel_link_bw_limits;
> > > >
> > > > int intel_fdi_link_freq(struct drm_i915_private *i915,
> > > > const struct intel_crtc_state *pipe_config);
> > > > int ilk_fdi_compute_config(struct intel_crtc *intel_crtc,
> > > > struct intel_crtc_state *pipe_config);
> > > > +int intel_fdi_atomic_check_link(struct intel_atomic_state *state,
> > > > + struct intel_link_bw_limits *limits);
> > > > void intel_fdi_normal_train(struct intel_crtc *crtc);
> > > > void ilk_fdi_disable(struct intel_crtc *crtc);
> > > > void ilk_fdi_pll_disable(struct intel_crtc *intel_crtc);
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_link_bw.c b/drivers/gpu/drm/i915/display/intel_link_bw.c
> > > > index 22494772b9d59..aacf22bab3135 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_link_bw.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_link_bw.c
> > > > @@ -160,7 +160,12 @@ intel_link_bw_reset_pipe_limit_to_min(struct intel_atomic_state *state,
> > > > static int check_all_link_config(struct intel_atomic_state *state,
> > > > struct intel_link_bw_limits *limits)
> > > > {
> > > > - /* TODO: Check all shared display link configurations like FDI */
> > > > + int ret;
> > > > +
> > > > + ret = intel_fdi_atomic_check_link(state, limits);
> > > > + if (ret)
> > > > + return ret;
> > > > +
> > > > return 0;
> > > > }
> > > >
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_lvds.c b/drivers/gpu/drm/i915/display/intel_lvds.c
> > > > index 3ace56979b70e..0366d4cc6b72b 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_lvds.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_lvds.c
> > > > @@ -48,6 +48,7 @@
> > > > #include "intel_dpll.h"
> > > > #include "intel_fdi.h"
> > > > #include "intel_gmbus.h"
> > > > +#include "intel_link_bw.h"
> > > > #include "intel_lvds.h"
> > > > #include "intel_lvds_regs.h"
> > > > #include "intel_panel.h"
> > > > @@ -425,6 +426,12 @@ static int intel_lvds_compute_config(struct intel_encoder *encoder,
> > > > return -EINVAL;
> > > > }
> > > >
> > > > + if (HAS_PCH_SPLIT(i915)) {
> > > > + crtc_state->has_pch_encoder = true;
> > > > + if (!intel_link_bw_compute_pipe_bpp(crtc_state))
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > if (lvds_encoder->a3_power == LVDS_A3_POWER_UP)
> > > > lvds_bpp = 8*3;
> > > > else
> > > > @@ -453,9 +460,6 @@ static int intel_lvds_compute_config(struct intel_encoder *encoder,
> > > > if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
> > > > return -EINVAL;
> > > >
> > > > - if (HAS_PCH_SPLIT(i915))
> > > > - crtc_state->has_pch_encoder = true;
> > > > -
> > > > ret = intel_panel_fitting(crtc_state, conn_state);
> > > > if (ret)
> > > > return ret;
> > > > diff --git a/drivers/gpu/drm/i915/display/intel_sdvo.c b/drivers/gpu/drm/i915/display/intel_sdvo.c
> > > > index 135a2527fd1b4..3c912f3bc10ba 100644
> > > > --- a/drivers/gpu/drm/i915/display/intel_sdvo.c
> > > > +++ b/drivers/gpu/drm/i915/display/intel_sdvo.c
> > > > @@ -48,6 +48,7 @@
> > > > #include "intel_gmbus.h"
> > > > #include "intel_hdmi.h"
> > > > #include "intel_hotplug.h"
> > > > +#include "intel_link_bw.h"
> > > > #include "intel_panel.h"
> > > > #include "intel_sdvo.h"
> > > > #include "intel_sdvo_regs.h"
> > > > @@ -1351,14 +1352,17 @@ static int intel_sdvo_compute_config(struct intel_encoder *encoder,
> > > > struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
> > > > struct drm_display_mode *mode = &pipe_config->hw.mode;
> > > >
> > > > + if (HAS_PCH_SPLIT(to_i915(encoder->base.dev))) {
> > > > + pipe_config->has_pch_encoder = true;
> > > > + if (!intel_link_bw_compute_pipe_bpp(pipe_config))
> > > > + return -EINVAL;
> > > > + }
> > > > +
> > > > DRM_DEBUG_KMS("forcing bpc to 8 for SDVO\n");
> > > > pipe_config->pipe_bpp = 8*3;
> > >
> > > This seems borked. I think we want to force this to 8bpc only if we're
> > > higher currently.
> >
> > This would fail the modeset if pipe_bpp would need to be reduced to 6*3
> > due to a BW limit and that's what happens before this change as well
> > afaics. I agree it's strange to detect that only later in the retry loop
> > and the above should return already error in that case. Are you ok with
> > that (if crtc_state->max_link_bpp < 8*3 -> return -EINVAL) ?
>
> I don't think forcing to 8bpc makes any real sense, other than as an
> upper limit (since SDVO can only transmit 8bpc data). So I think this
> should just use 'min(pipe_bpp, 8*3)'. But we should do that change
> as a separate patch.
Ok, I'll drop the above check then, handling the pipe_bpp==6*3 case the
current way.
> > If you meant that increasing an EDID (6 bpc) baseline to 8 bpc (if BW
> > allows otherwise) doesn't make sense either here, that would be an issue
> > already before this change. I can add a FIXME: comment for that.
> >
> > > Same for the LVDS case I think, though that one is a bit more sane atm
> > > since it looks at the bw_constrained flag, though I don't think we
> > > really need that flag anymore, at least for this purpose.
> >
> > This patch doesn't change the behavior there either, but bw_constrained
> > could be replaced with crtc_state->max_link_bpp < lvds_bpp (as a
> > follow-up imo).
> >
> > > Hmm, but maybe we do still need it for the LPT FDI case where we do
> > > actually want to increase the bpc to 8 if the EDID baseline is below
> > > that.
> >
> > I suppose bw_constrained && pipe_bpp < 24 there could be also replaced
> > with crtc_state->max_link_bpp < 24.
> >
> > > > pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB;
> > > > pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
> > > >
> > > > - if (HAS_PCH_SPLIT(to_i915(encoder->base.dev)))
> > > > - pipe_config->has_pch_encoder = true;
> > > > -
> > > > /*
> > > > * We need to construct preferred input timings based on our
> > > > * output timings. To do that, we have to set the output
> > > > --
> > > > 2.37.2
> > >
> > > --
> > > Ville Syrjälä
> > > Intel
>
> --
> Ville Syrjälä
> Intel
More information about the Intel-gfx
mailing list