[PATCH v2 18/25] drm/i915/display: Enable RM timeout detection

Jani Nikula jani.nikula at linux.intel.com
Wed Apr 3 11:57:05 UTC 2024


On Wed, 03 Apr 2024, Balasubramani Vivekanandan <balasubramani.vivekanandan at intel.com> wrote:
> From: Mitul Golani <mitulkumar.ajitkumar.golani at intel.com>
>
> Enable RM timeout interrupt to detect any hang during display engine
> register access. This interrupt is supported only on Display version 14.
> Current default timeout is 2ms.
>
> WA: 14012195489

Please don't invent new trailers. Add proper wa descriptions in
comments.

> Bspec: 50110
>

There should be no blank line here.

> CC: Suraj Kandpal <suraj.kandpal at intel.com>
> Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani at intel.com>
> Signed-off-by: Balasubramani Vivekanandan <balasubramani.vivekanandan at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_display_irq.c | 10 ++++++++++
>  drivers/gpu/drm/i915/i915_reg.h                  |  3 +++
>  2 files changed, 13 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display_irq.c b/drivers/gpu/drm/i915/display/intel_display_irq.c
> index f846c5b108b5..3035b50fcad9 100644
> --- a/drivers/gpu/drm/i915/display/intel_display_irq.c
> +++ b/drivers/gpu/drm/i915/display/intel_display_irq.c
> @@ -851,6 +851,13 @@ gen8_de_misc_irq_handler(struct drm_i915_private *dev_priv, u32 iir)
>  {
>  	bool found = false;
>  
> +	if (iir & GEN8_DE_RM_TIMEOUT) {
> +		u32 val = intel_uncore_read(&dev_priv->uncore,
> +				RMTIMEOUTREG_CAPTURE);
> +		drm_warn(&dev_priv->drm, "Register Access Timeout = 0x%x\n", val);

What good does this do with no information on the register?

> +		found = true;
> +	}
> +
>  	if (DISPLAY_VER(dev_priv) >= 14) {
>  		if (iir & (XELPDP_PMDEMAND_RSP |
>  			   XELPDP_PMDEMAND_RSPTOUT_ERR)) {
> @@ -1666,6 +1673,9 @@ void gen8_de_irq_postinstall(struct drm_i915_private *dev_priv)
>  			de_port_masked |= DSI0_TE | DSI1_TE;
>  	}
>  
> +	if (DISPLAY_VER(dev_priv) == 14)
> +		de_misc_masked |= GEN8_DE_RM_TIMEOUT;
> +
>  	de_pipe_enables = de_pipe_masked |
>  		GEN8_PIPE_VBLANK |
>  		gen8_de_pipe_underrun_mask(dev_priv) |
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 875d76fb8cd0..d1692b32bb8a 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -4212,6 +4212,8 @@
>  #define RM_TIMEOUT		_MMIO(0x42060)
>  #define  MMIO_TIMEOUT_US(us)	((us) << 0)
>  
> +#define RMTIMEOUTREG_CAPTURE	_MMIO(0x420e0)
> +
>  /* interrupts */
>  #define DE_MASTER_IRQ_CONTROL   (1 << 31)
>  #define DE_SPRITEB_FLIP_DONE    (1 << 29)
> @@ -4398,6 +4400,7 @@
>  #define GEN8_DE_MISC_IMR _MMIO(0x44464)
>  #define GEN8_DE_MISC_IIR _MMIO(0x44468)
>  #define GEN8_DE_MISC_IER _MMIO(0x4446c)
> +#define  GEN8_DE_RM_TIMEOUT		REG_BIT(29)
>  #define  XELPDP_PMDEMAND_RSPTOUT_ERR	REG_BIT(27)
>  #define  GEN8_DE_MISC_GSE		REG_BIT(27)
>  #define  GEN8_DE_EDP_PSR		REG_BIT(19)

-- 
Jani Nikula, Intel


More information about the Intel-gfx mailing list