[PATCH 11/12] drm/client: Streamline mode selection debugs
Thomas Zimmermann
tzimmermann at suse.de
Fri Apr 5 07:49:28 UTC 2024
Hi
this patch should probably go before [09/12].
Best regards
Thomas
Am 04.04.24 um 22:33 schrieb Ville Syrjala:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Get rid of all the redundant debugs and just wait until the end
> to print which mode (and of which type) we picked.
>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
> drivers/gpu/drm/drm_client_modeset.c | 65 +++++++++++++---------------
> 1 file changed, 31 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_client_modeset.c b/drivers/gpu/drm/drm_client_modeset.c
> index 415d1799337b..ad88c11037d8 100644
> --- a/drivers/gpu/drm/drm_client_modeset.c
> +++ b/drivers/gpu/drm/drm_client_modeset.c
> @@ -408,6 +408,8 @@ static bool drm_client_target_preferred(struct drm_device *dev,
>
> retry:
> for (i = 0; i < connector_count; i++) {
> + const char *mode_type;
> +
> connector = connectors[i];
>
> if (conn_configured & BIT_ULL(i))
> @@ -440,20 +442,20 @@ static bool drm_client_target_preferred(struct drm_device *dev,
> drm_client_get_tile_offsets(dev, connectors, connector_count, modes, offsets, i,
> connector->tile_h_loc, connector->tile_v_loc);
> }
> - drm_dbg_kms(dev, "looking for cmdline mode on [CONNECTOR:%d:%s]\n",
> - connector->base.id, connector->name);
>
> - /* got for command line mode first */
> + mode_type = "cmdline";
> modes[i] = drm_connector_pick_cmdline_mode(connector);
> +
> if (!modes[i]) {
> - drm_dbg_kms(dev, "looking for preferred mode on [CONNECTOR:%d:%s] (tile group: %d)\n",
> - connector->base.id, connector->name,
> - connector->tile_group ? connector->tile_group->id : 0);
> + mode_type = "preferred";
> modes[i] = drm_connector_preferred_mode(connector, width, height);
> }
> - /* No preferred modes, pick one off the list */
> - if (!modes[i])
> +
> + if (!modes[i]) {
> + mode_type = "first";
> modes[i] = drm_connector_first_mode(connector);
> + }
> +
> /*
> * In case of tiled mode if all tiles not present fallback to
> * first available non tiled mode.
> @@ -468,16 +470,20 @@ static bool drm_client_target_preferred(struct drm_device *dev,
> (connector->tile_h_loc == 0 &&
> connector->tile_v_loc == 0 &&
> !drm_connector_get_tiled_mode(connector))) {
> - drm_dbg_kms(dev, "Falling back to non tiled mode on [CONNECTOR:%d:%s]\n",
> - connector->base.id, connector->name);
> + mode_type = "non tiled";
> modes[i] = drm_connector_fallback_non_tiled_mode(connector);
> } else {
> + mode_type = "tiled";
> modes[i] = drm_connector_get_tiled_mode(connector);
> }
> }
>
> - drm_dbg_kms(dev, "found mode %s\n",
> - modes[i] ? modes[i]->name : "none");
> + if (!modes[i])
> + mode_type = "no";
> +
> + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] found %s mode: %s\n",
> + connector->base.id, connector->name,
> + mode_type, modes[i] ? modes[i]->name : "none");
> conn_configured |= BIT_ULL(i);
> }
>
> @@ -624,6 +630,7 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
> struct drm_connector *connector;
> struct drm_encoder *encoder;
> struct drm_crtc *new_crtc;
> + const char *mode_type;
>
> connector = connectors[i];
>
> @@ -673,29 +680,22 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
> */
> for (j = 0; j < count; j++) {
> if (crtcs[j] == new_crtc) {
> - drm_dbg_kms(dev, "fallback: cloned configuration\n");
> + drm_dbg_kms(dev, "[CONNECTOR:%d:%s] fallback: cloned configuration\n",
> + connector->base.id, connector->name);
> goto bail;
> }
> }
>
> - drm_dbg_kms(dev, "looking for cmdline mode on [CONNECTOR:%d:%s]\n",
> - connector->base.id, connector->name);
> -
> - /* go for command line mode first */
> + mode_type = "cmdline";
> modes[i] = drm_connector_pick_cmdline_mode(connector);
>
> - /* try for preferred next */
> if (!modes[i]) {
> - drm_dbg_kms(dev, "looking for preferred mode on [CONNECTOR:%d:%s] (tiled? %s)\n",
> - connector->base.id, connector->name,
> - str_yes_no(connector->has_tile));
> + mode_type = "preferred";
> modes[i] = drm_connector_preferred_mode(connector, width, height);
> }
>
> - /* No preferred mode marked by the EDID? Are there any modes? */
> - if (!modes[i] && !list_empty(&connector->modes)) {
> - drm_dbg_kms(dev, "using first mode listed on [CONNECTOR:%d:%s]\n",
> - connector->base.id, connector->name);
> + if (!modes[i]) {
> + mode_type = "first";
> modes[i] = drm_connector_first_mode(connector);
> }
>
> @@ -706,28 +706,25 @@ static bool drm_client_firmware_config(struct drm_client_dev *client,
> * is dodgy. Switch to crtc->state->mode, after taking
> * care of the resulting locking/lifetime issues.
> */
> - drm_dbg_kms(dev, "looking for current mode on [CONNECTOR:%d:%s]\n",
> - connector->base.id, connector->name);
> + mode_type = "current";
> modes[i] = &connector->state->crtc->mode;
> }
> +
> /*
> * In case of tiled modes, if all tiles are not present
> * then fallback to a non tiled mode.
> */
> if (connector->has_tile &&
> num_tiled_conns < connector->num_h_tile * connector->num_v_tile) {
> - drm_dbg_kms(dev, "Falling back to non tiled mode on [CONNECTOR:%d:%s]\n",
> - connector->base.id, connector->name);
> + mode_type = "non tiled";
> modes[i] = drm_connector_fallback_non_tiled_mode(connector);
> }
> crtcs[i] = new_crtc;
>
> - drm_dbg_kms(dev, "[CONNECTOR:%d:%s] on [CRTC:%d:%s]: %dx%d%s\n",
> + drm_dbg_kms(dev, "[CONNECTOR::%d:%s] on [CRTC:%d:%s] using %s mode: %s\n",
> connector->base.id, connector->name,
> - connector->state->crtc->base.id,
> - connector->state->crtc->name,
> - modes[i]->hdisplay, modes[i]->vdisplay,
> - modes[i]->flags & DRM_MODE_FLAG_INTERLACE ? "i" : "");
> + new_crtc->base.id, new_crtc->name,
> + mode_type, modes[i]->name);
>
> fallback = false;
> conn_configured |= BIT(i);
--
--
Thomas Zimmermann
Graphics Driver Developer
SUSE Software Solutions Germany GmbH
Frankenstrasse 146, 90461 Nuernberg, Germany
GF: Ivo Totev, Andrew Myers, Andrew McDonald, Boudien Moerman
HRB 36809 (AG Nuernberg)
More information about the Intel-gfx
mailing list