[PATCH 4/8] drm/i915/dpio: Introdude bxt_ddi_phy_rmw_grp()
Ville Syrjala
ville.syrjala at linux.intel.com
Fri Apr 12 17:58:14 UTC 2024
From: Ville Syrjälä <ville.syrjala at linux.intel.com>
Add a helper to do the "read from one per-lane register
and write to the group register" rmw cycle.
Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
drivers/gpu/drm/i915/display/intel_dpio_phy.c | 59 ++++++++++++-------
1 file changed, 38 insertions(+), 21 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_dpio_phy.c b/drivers/gpu/drm/i915/display/intel_dpio_phy.c
index a793a872dfa3..3d1295da1106 100644
--- a/drivers/gpu/drm/i915/display/intel_dpio_phy.c
+++ b/drivers/gpu/drm/i915/display/intel_dpio_phy.c
@@ -270,6 +270,24 @@ void bxt_port_to_phy_channel(struct drm_i915_private *dev_priv, enum port port,
*ch = DPIO_CH0;
}
+/*
+ * Like intel_de_rmw() but reads from a single per-lane register and
+ * writes to the group register to write the same value to all the lanes.
+ */
+static u32 bxt_ddi_phy_rmw_grp(struct drm_i915_private *i915,
+ i915_reg_t reg_single,
+ i915_reg_t reg_group,
+ u32 clear, u32 set)
+{
+ u32 old, val;
+
+ old = intel_de_read(i915, reg_single);
+ val = (old & ~clear) | set;
+ intel_de_write(i915, reg_group, val);
+
+ return old;
+}
+
void bxt_ddi_phy_set_signal_levels(struct intel_encoder *encoder,
const struct intel_crtc_state *crtc_state)
{
@@ -291,35 +309,34 @@ void bxt_ddi_phy_set_signal_levels(struct intel_encoder *encoder,
* While we write to the group register to program all lanes at once we
* can read only lane registers and we pick lanes 0/1 for that.
*/
- val = intel_de_read(dev_priv, BXT_PORT_PCS_DW10_LN01(phy, ch));
- val &= ~(TX2_SWING_CALC_INIT | TX1_SWING_CALC_INIT);
- intel_de_write(dev_priv, BXT_PORT_PCS_DW10_GRP(phy, ch), val);
+ bxt_ddi_phy_rmw_grp(dev_priv, BXT_PORT_PCS_DW10_LN01(phy, ch),
+ BXT_PORT_PCS_DW10_GRP(phy, ch),
+ TX2_SWING_CALC_INIT | TX1_SWING_CALC_INIT, 0);
- val = intel_de_read(dev_priv, BXT_PORT_TX_DW2_LN(phy, ch, 0));
- val &= ~(MARGIN_000_MASK | UNIQ_TRANS_SCALE_MASK);
- val |= MARGIN_000(trans->entries[level].bxt.margin) |
- UNIQ_TRANS_SCALE(trans->entries[level].bxt.scale);
- intel_de_write(dev_priv, BXT_PORT_TX_DW2_GRP(phy, ch), val);
+ bxt_ddi_phy_rmw_grp(dev_priv, BXT_PORT_TX_DW2_LN(phy, ch, 0),
+ BXT_PORT_TX_DW2_GRP(phy, ch),
+ MARGIN_000_MASK | UNIQ_TRANS_SCALE_MASK,
+ MARGIN_000(trans->entries[level].bxt.margin) |
+ UNIQ_TRANS_SCALE(trans->entries[level].bxt.scale));
+
+ bxt_ddi_phy_rmw_grp(dev_priv, BXT_PORT_TX_DW3_LN(phy, ch, 0),
+ BXT_PORT_TX_DW3_GRP(phy, ch),
+ SCALE_DCOMP_METHOD,
+ trans->entries[level].bxt.enable ?
+ SCALE_DCOMP_METHOD : 0);
val = intel_de_read(dev_priv, BXT_PORT_TX_DW3_LN(phy, ch, 0));
- val &= ~SCALE_DCOMP_METHOD;
- if (trans->entries[level].bxt.enable)
- val |= SCALE_DCOMP_METHOD;
-
if ((val & UNIQUE_TRANGE_EN_METHOD) && !(val & SCALE_DCOMP_METHOD))
drm_err(&dev_priv->drm,
"Disabled scaling while ouniqetrangenmethod was set");
- intel_de_write(dev_priv, BXT_PORT_TX_DW3_GRP(phy, ch), val);
+ bxt_ddi_phy_rmw_grp(dev_priv, BXT_PORT_TX_DW4_LN(phy, ch, 0),
+ BXT_PORT_TX_DW4_GRP(phy, ch), DE_EMPHASIS_MASK,
+ DE_EMPHASIS(trans->entries[level].bxt.deemphasis));
- val = intel_de_read(dev_priv, BXT_PORT_TX_DW4_LN(phy, ch, 0));
- val &= ~DE_EMPHASIS_MASK;
- val |= DE_EMPHASIS(trans->entries[level].bxt.deemphasis);
- intel_de_write(dev_priv, BXT_PORT_TX_DW4_GRP(phy, ch), val);
-
- val = intel_de_read(dev_priv, BXT_PORT_PCS_DW10_LN01(phy, ch));
- val |= TX2_SWING_CALC_INIT | TX1_SWING_CALC_INIT;
- intel_de_write(dev_priv, BXT_PORT_PCS_DW10_GRP(phy, ch), val);
+ bxt_ddi_phy_rmw_grp(dev_priv, BXT_PORT_PCS_DW10_LN01(phy, ch),
+ BXT_PORT_PCS_DW10_GRP(phy, ch),
+ 0, TX2_SWING_CALC_INIT | TX1_SWING_CALC_INIT);
}
bool bxt_ddi_phy_is_enabled(struct drm_i915_private *dev_priv,
--
2.43.2
More information about the Intel-gfx
mailing list