[PATCH 02/14] drm/i915/dpio: s/VLV_REF_DW13/VLV_REF_DW11/

[Jani Nikula]

On Mon, 22 Apr 2024, Ville Syrjala <ville.syrjala at linux.intel.com> wrote:
> From: Ville Syrjälä <ville.syrjala at linux.intel.com>
>
> Our VLV_REF_DW13 is actually VLV_REF_DW11. Rename it.

I'll take your word for it. The patch does what the commit message says,

Reviewed-by: Jani Nikula <jani.nikula at intel.com>

>
> Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dpll.c | 8 ++++----
>  drivers/gpu/drm/i915/i915_reg.h           | 4 ++--
>  2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dpll.c b/drivers/gpu/drm/i915/display/intel_dpll.c
> index 49274d632716..6693beafe9c0 100644
> --- a/drivers/gpu/drm/i915/display/intel_dpll.c
> +++ b/drivers/gpu/drm/i915/display/intel_dpll.c
> @@ -1880,19 +1880,19 @@ static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv,
>  	reg_val |= 0x00000030;
>  	vlv_dpio_write(dev_priv, phy, VLV_PLL_DW9(1), reg_val);
>  
> -	reg_val = vlv_dpio_read(dev_priv, phy, VLV_REF_DW13);
> +	reg_val = vlv_dpio_read(dev_priv, phy, VLV_REF_DW11);
>  	reg_val &= 0x00ffffff;
>  	reg_val |= 0x8c000000;
> -	vlv_dpio_write(dev_priv, phy, VLV_REF_DW13, reg_val);
> +	vlv_dpio_write(dev_priv, phy, VLV_REF_DW11, reg_val);
>  
>  	reg_val = vlv_dpio_read(dev_priv, phy, VLV_PLL_DW9(1));
>  	reg_val &= 0xffffff00;
>  	vlv_dpio_write(dev_priv, phy, VLV_PLL_DW9(1), reg_val);
>  
> -	reg_val = vlv_dpio_read(dev_priv, phy, VLV_REF_DW13);
> +	reg_val = vlv_dpio_read(dev_priv, phy, VLV_REF_DW11);
>  	reg_val &= 0x00ffffff;
>  	reg_val |= 0xb0000000;
> -	vlv_dpio_write(dev_priv, phy, VLV_REF_DW13, reg_val);
> +	vlv_dpio_write(dev_priv, phy, VLV_REF_DW11, reg_val);
>  }
>  
>  static void vlv_prepare_pll(const struct intel_crtc_state *crtc_state)
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 8eb6c2bf4557..a2fadcbe0932 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -246,8 +246,8 @@
>  #define _VLV_PLL_DW11_CH1		0x806c
>  #define VLV_PLL_DW11(ch) _PIPE(ch, _VLV_PLL_DW11_CH0, _VLV_PLL_DW11_CH1)
>  
> -/* Spec for ref block start counts at DW10 */
> -#define VLV_REF_DW13			0x80ac
> +/* Spec for ref block start counts at DW8 */
> +#define VLV_REF_DW11			0x80ac
>  
>  #define VLV_CMN_DW0			0x8100

-- 
Jani Nikula, Intel