[PATCH v2 2/4] drm/i915/dsi: add VLV_ prefix to VLV only register macros

[Rodrigo Vivi]

On Fri, Apr 19, 2024 at 01:04:04PM +0300, Jani Nikula wrote:
> All the BXT specific macros have BXT_ prefix, do the same for VLV for
> consistency. This is helpful because the platform specific macros can
> use the static MIPI MMIO base rather than dynamic.
> 
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>

Reviewed-by: Rodrigo Vivi <rodrigo.vivi at intel.com>

> ---
>  drivers/gpu/drm/i915/display/vlv_dsi.c      | 6 +++---
>  drivers/gpu/drm/i915/display/vlv_dsi_regs.h | 4 ++--
>  2 files changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index 63f4af601d15..665247a2e834 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -481,7 +481,7 @@ static void vlv_dsi_device_ready(struct intel_encoder *encoder)
>  		 * Common bit for both MIPI Port A & MIPI Port C
>  		 * No similar bit in MIPI Port C reg
>  		 */
> -		intel_de_rmw(dev_priv, MIPI_PORT_CTRL(PORT_A), 0, LP_OUTPUT_HOLD);
> +		intel_de_rmw(dev_priv, VLV_MIPI_PORT_CTRL(PORT_A), 0, LP_OUTPUT_HOLD);
>  		usleep_range(1000, 1500);
>  
>  		intel_de_write(dev_priv, MIPI_DEVICE_READY(port),
> @@ -563,7 +563,7 @@ static void glk_dsi_clear_device_ready(struct intel_encoder *encoder)
>  static i915_reg_t port_ctrl_reg(struct drm_i915_private *i915, enum port port)
>  {
>  	return IS_GEMINILAKE(i915) || IS_BROXTON(i915) ?
> -		BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(port);
> +		BXT_MIPI_PORT_CTRL(port) : VLV_MIPI_PORT_CTRL(port);
>  }
>  
>  static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder)
> @@ -576,7 +576,7 @@ static void vlv_dsi_clear_device_ready(struct intel_encoder *encoder)
>  	for_each_dsi_port(port, intel_dsi->ports) {
>  		/* Common bit for both MIPI Port A & MIPI Port C on VLV/CHV */
>  		i915_reg_t port_ctrl = IS_BROXTON(dev_priv) ?
> -			BXT_MIPI_PORT_CTRL(port) : MIPI_PORT_CTRL(PORT_A);
> +			BXT_MIPI_PORT_CTRL(port) : VLV_MIPI_PORT_CTRL(PORT_A);
>  
>  		intel_de_write(dev_priv, MIPI_DEVICE_READY(port),
>  			       DEVICE_READY | ULPS_STATE_ENTER);
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi_regs.h b/drivers/gpu/drm/i915/display/vlv_dsi_regs.h
> index b0cdaad7db9c..12a608a73720 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi_regs.h
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi_regs.h
> @@ -40,7 +40,7 @@
>  
>  #define _MIPIA_PORT_CTRL			(VLV_DISPLAY_BASE + 0x61190)
>  #define _MIPIC_PORT_CTRL			(VLV_DISPLAY_BASE + 0x61700)
> -#define MIPI_PORT_CTRL(port)	_MMIO_MIPI(port, _MIPIA_PORT_CTRL, _MIPIC_PORT_CTRL)
> +#define VLV_MIPI_PORT_CTRL(port)	_MMIO_MIPI(port, _MIPIA_PORT_CTRL, _MIPIC_PORT_CTRL)
>  
>   /* BXT port control */
>  #define _BXT_MIPIA_PORT_CTRL				0x6B0C0
> @@ -89,7 +89,7 @@
>  
>  #define _MIPIA_TEARING_CTRL			(VLV_DISPLAY_BASE + 0x61194)
>  #define _MIPIC_TEARING_CTRL			(VLV_DISPLAY_BASE + 0x61704)
> -#define MIPI_TEARING_CTRL(port)			_MMIO_MIPI(port, _MIPIA_TEARING_CTRL, _MIPIC_TEARING_CTRL)
> +#define VLV_MIPI_TEARING_CTRL(port)		_MMIO_MIPI(port, _MIPIA_TEARING_CTRL, _MIPIC_TEARING_CTRL)
>  #define  TEARING_EFFECT_DELAY_SHIFT			0
>  #define  TEARING_EFFECT_DELAY_MASK			(0xffff << 0)
>  
> -- 
> 2.39.2
>