[PATCH 4/4] drm/i915/cdclk: Document CDCLK update methods

[Ville Syrjala]

From: Ville Syrjälä <ville.syrjala at linux.intel.com>

Add a bit of documentation to briefly explain the methods
by which we can change the CDCLK frequency.

Signed-off-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
---
 drivers/gpu/drm/i915/display/intel_cdclk.c | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
index ca00586fdbc8..30dae4fef6cb 100644
--- a/drivers/gpu/drm/i915/display/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
@@ -63,6 +63,15 @@
  * DMC will not change the active CDCLK frequency however, so that part
  * will still be performed by the driver directly.
  *
+ * Several methods exist to change the CDCLK frequency, which ones are
+ * supported depends on the platform:
+ * - Full PLL disable + re-enable with new VCO frequency. Pipes must be inactive.
+ * - CD2X divider update. Single pipe can be active as the divider update
+ *   can be synchronized with the pipe's start of vblank.
+ * - Crawl the PLL smoothly to the new VCO frequency. Pipes can be active.
+ * - Squash waveform update. Pipes can be active.
+ * - Crawl and squash can also be done back to back. Pipes can be active.
+ *
  * RAWCLK is a fixed frequency clock, often used by various auxiliary
  * blocks such as AUX CH or backlight PWM. Hence the only thing we
  * really need to know about RAWCLK is its frequency so that various
-- 
2.43.0