[PATCH 11/12] drm/i915/hdcp: Allocate stream id after HDCP AKE stage
Nautiyal, Ankit K
ankit.k.nautiyal at intel.com
Thu Feb 15 08:17:16 UTC 2024
On 2/15/2024 10:35 AM, Suraj Kandpal wrote:
> Allocate stream id after HDCP AKE stage and not before so that it
> can also be done during link integrity check.
> Right now for MST scenarios LIC fails after hdcp enablement for this
> reason.
>
> Signed-off-by: Suraj Kandpal <suraj.kandpal at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_hdcp.c | 126 +++++++++++-----------
> 1 file changed, 60 insertions(+), 66 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_hdcp.c b/drivers/gpu/drm/i915/display/intel_hdcp.c
> index b22dbc6494e0..627b3e24197d 100644
> --- a/drivers/gpu/drm/i915/display/intel_hdcp.c
> +++ b/drivers/gpu/drm/i915/display/intel_hdcp.c
> @@ -68,19 +68,52 @@ static int intel_conn_to_vcpi(struct intel_atomic_state *state,
> * DP MST topology. Though it is not compulsory, security fw should change its
> * policy to mark different content_types for different streams.
> */
> -static void
> -intel_hdcp_required_content_stream(struct intel_digital_port *dig_port)
> +static int
> +intel_hdcp_required_content_stream(struct intel_atomic_state *state,
> + struct intel_hdcp *hdcp,
I dont think we are using this in the function, so lets remove this.
> + struct intel_digital_port *dig_port)
> {
> + struct drm_connector_list_iter conn_iter;
> + struct intel_digital_port *conn_dig_port;
> + struct intel_connector *connector;
> + struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
> struct hdcp_port_data *data = &dig_port->hdcp_port_data;
> bool enforce_type0 = false;
> int k;
>
> if (dig_port->hdcp_auth_status)
> - return;
> + return 0;
> +
> + data->k = 0;
>
> if (!dig_port->hdcp_mst_type1_capable)
> enforce_type0 = true;
>
> + drm_connector_list_iter_begin(&i915->drm, &conn_iter);
> + for_each_intel_connector_iter(connector, &conn_iter) {
> + if (connector->base.status == connector_status_disconnected)
> + continue;
> +
> + if (!intel_encoder_is_mst(intel_attached_encoder(connector)))
> + continue;
> +
> + conn_dig_port = intel_attached_dig_port(connector);
> + if (conn_dig_port != dig_port)
> + continue;
> +
> + data->streams[data->k].stream_id =
> + intel_conn_to_vcpi(state, connector);
> + data->k++;
> +
> + /* if there is only one active stream */
> + if (dig_port->dp.active_mst_links <= 1)
> + break;
> + }
> + drm_connector_list_iter_end(&conn_iter);
> +
> + if (drm_WARN_ON(&i915->drm, data->k > INTEL_NUM_PIPES(i915) || data->k == 0))
> + return -EINVAL;
> +
> /*
> * Apply common protection level across all streams in DP MST Topology.
> * Use highest supported content type for all streams in DP MST Topology.
> @@ -88,18 +121,24 @@ intel_hdcp_required_content_stream(struct intel_digital_port *dig_port)
> for (k = 0; k < data->k; k++)
> data->streams[k].stream_type =
> enforce_type0 ? DRM_MODE_HDCP_CONTENT_TYPE0 : DRM_MODE_HDCP_CONTENT_TYPE1;
> +
> + return 0;
> }
>
> -static void intel_hdcp_prepare_streams(struct intel_connector *connector)
> +static int intel_hdcp_prepare_streams(struct intel_atomic_state *state,
> + struct intel_connector *connector)
> {
> struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
> struct hdcp_port_data *data = &dig_port->hdcp_port_data;
> struct intel_hdcp *hdcp = &connector->hdcp;
>
> if (!intel_encoder_is_mst(intel_attached_encoder(connector))) {
> + data->k = 1;
> + data->streams[0].stream_id = 0;
> data->streams[0].stream_type = hdcp->content_type;
> + return 0;
> } else {
> - intel_hdcp_required_content_stream(dig_port);
> + return intel_hdcp_required_content_stream(state, hdcp, dig_port);
> }
We can get rid of else block now, we can just return
intel_hdcp_required_content_stream(state, dig_port);
I wonder if it would be better to check for mst encoder first:
if (intel_encoder_is_mst(intel_attached_encoder(connector)))
return intel_hdcp_required_content_stream(state, dig_port);
data->k = 1;
data->streams[0].stream_id = 0;
data->streams[0].stream_type = hdcp->content_type;
return 0;
Regards, Ankit
> }
>
> @@ -1901,7 +1940,8 @@ hdcp2_propagate_stream_management_info(struct intel_connector *connector)
> return ret;
> }
>
> -static int hdcp2_authenticate_and_encrypt(struct intel_connector *connector)
> +static int hdcp2_authenticate_and_encrypt(struct intel_atomic_state *state,
> + struct intel_connector *connector)
> {
> struct intel_digital_port *dig_port = intel_attached_dig_port(connector);
> struct drm_i915_private *i915 = to_i915(connector->base.dev);
> @@ -1910,7 +1950,13 @@ static int hdcp2_authenticate_and_encrypt(struct intel_connector *connector)
> for (i = 0; i < tries && !dig_port->hdcp_auth_status; i++) {
> ret = hdcp2_authenticate_sink(connector);
> if (!ret) {
> - intel_hdcp_prepare_streams(connector);
> + ret = intel_hdcp_prepare_streams(state, connector);
> + if (ret) {
> + drm_dbg_kms(&i915->drm,
> + "Prepare stream failed.(%d)\n",
> + ret);
> + break;
> + }
>
> ret = hdcp2_propagate_stream_management_info(connector);
> if (ret) {
> @@ -1955,7 +2001,8 @@ static int hdcp2_authenticate_and_encrypt(struct intel_connector *connector)
> return ret;
> }
>
> -static int _intel_hdcp2_enable(struct intel_connector *connector)
> +static int _intel_hdcp2_enable(struct intel_atomic_state *state,
> + struct intel_connector *connector)
> {
> struct drm_i915_private *i915 = to_i915(connector->base.dev);
> struct intel_hdcp *hdcp = &connector->hdcp;
> @@ -1965,7 +2012,7 @@ static int _intel_hdcp2_enable(struct intel_connector *connector)
> connector->base.base.id, connector->base.name,
> hdcp->content_type);
>
> - ret = hdcp2_authenticate_and_encrypt(connector);
> + ret = hdcp2_authenticate_and_encrypt(state, connector);
> if (ret) {
> drm_dbg_kms(&i915->drm, "HDCP2 Type%d Enabling Failed. (%d)\n",
> hdcp->content_type, ret);
> @@ -2293,52 +2340,6 @@ int intel_hdcp_init(struct intel_connector *connector,
> return 0;
> }
>
> -static int
> -intel_hdcp_set_streams(struct intel_digital_port *dig_port,
> - struct intel_atomic_state *state)
> -{
> - struct drm_connector_list_iter conn_iter;
> - struct intel_digital_port *conn_dig_port;
> - struct intel_connector *connector;
> - struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
> - struct hdcp_port_data *data = &dig_port->hdcp_port_data;
> -
> - if (!intel_encoder_is_mst(&dig_port->base)) {
> - data->k = 1;
> - data->streams[0].stream_id = 0;
> - return 0;
> - }
> -
> - data->k = 0;
> -
> - drm_connector_list_iter_begin(&i915->drm, &conn_iter);
> - for_each_intel_connector_iter(connector, &conn_iter) {
> - if (connector->base.status == connector_status_disconnected)
> - continue;
> -
> - if (!intel_encoder_is_mst(intel_attached_encoder(connector)))
> - continue;
> -
> - conn_dig_port = intel_attached_dig_port(connector);
> - if (conn_dig_port != dig_port)
> - continue;
> -
> - data->streams[data->k].stream_id =
> - intel_conn_to_vcpi(state, connector);
> - data->k++;
> -
> - /* if there is only one active stream */
> - if (dig_port->dp.active_mst_links <= 1)
> - break;
> - }
> - drm_connector_list_iter_end(&conn_iter);
> -
> - if (drm_WARN_ON(&i915->drm, data->k > INTEL_NUM_PIPES(i915) || data->k == 0))
> - return -EINVAL;
> -
> - return 0;
> -}
> -
> static int _intel_hdcp_enable(struct intel_atomic_state *state,
> struct intel_encoder *encoder,
> const struct intel_crtc_state *pipe_config,
> @@ -2384,17 +2385,10 @@ static int _intel_hdcp_enable(struct intel_atomic_state *state,
> * is capable of HDCP2.2, it is preferred to use HDCP2.2.
> */
> if (intel_hdcp2_get_capability(connector)) {
> - ret = intel_hdcp_set_streams(dig_port, state);
> - if (!ret) {
> - ret = _intel_hdcp2_enable(connector);
> - if (!ret)
> - check_link_interval =
> - DRM_HDCP2_CHECK_PERIOD_MS;
> - } else {
> - drm_dbg_kms(&i915->drm,
> - "Set content streams failed: (%d)\n",
> - ret);
> - }
> + ret = _intel_hdcp2_enable(state, connector);
> + if (!ret)
> + check_link_interval =
> + DRM_HDCP2_CHECK_PERIOD_MS;
> }
>
> /*
More information about the Intel-gfx
mailing list