[PATCH 5/5] drm/xe/hdcp: Add intel_hdcp_gsc_message to Makefile

Maarten Lankhorst maarten.lankhorst at linux.intel.com
Fri Feb 16 13:52:12 UTC 2024


Hey,

Where is xe_hdcp_gsc_message.c defined in this series?

I would move this part there.

On 2024-02-09 11:14, Suraj Kandpal wrote:
> Add intel_hdcp_gsc_message to Makefile and add corresponding
> changes to xe_hdcp_gsc.c to make it build.
> 
> Signed-off-by: Suraj Kandpal <suraj.kandpal at intel.com>
> ---
>   drivers/gpu/drm/xe/Makefile              |  1 +
>   drivers/gpu/drm/xe/display/xe_hdcp_gsc.c | 18 ++++++++++++++++++
>   2 files changed, 19 insertions(+)
> 
> diff --git a/drivers/gpu/drm/xe/Makefile b/drivers/gpu/drm/xe/Makefile
> index c531210695db..2b654c908ff3 100644
> --- a/drivers/gpu/drm/xe/Makefile
> +++ b/drivers/gpu/drm/xe/Makefile
> @@ -254,6 +254,7 @@ xe-$(CONFIG_DRM_XE_DISPLAY) += \
>   	i915-display/intel_global_state.o \
>   	i915-display/intel_gmbus.o \
>   	i915-display/intel_hdcp.o \
> +	i915-display/intel_hdcp_gsc_message.o \
>   	i915-display/intel_hdmi.o \
>   	i915-display/intel_hotplug.o \
>   	i915-display/intel_hotplug_irq.o \
> diff --git a/drivers/gpu/drm/xe/display/xe_hdcp_gsc.c b/drivers/gpu/drm/xe/display/xe_hdcp_gsc.c
> index aa8c13916bb6..f185465d5682 100644
> --- a/drivers/gpu/drm/xe/display/xe_hdcp_gsc.c
> +++ b/drivers/gpu/drm/xe/display/xe_hdcp_gsc.c
> @@ -5,9 +5,11 @@
>   
>   #include <drm/drm_print.h>
>   #include <linux/delay.h>
> +#include <drm/i915_hdcp_interface.h>
>   
>   #include "abi/gsc_command_header_abi.h"
>   #include "intel_hdcp_gsc.h"
> +#include "intel_hdcp_gsc_message.h"
>   #include "xe_device_types.h"
>   #include "xe_gt.h"
>   #include "xe_gsc_proxy.h"
> @@ -113,6 +115,22 @@ static int intel_hdcp_gsc_hdcp2_init(struct xe_device *xe)
>   	return ret;
>   }
>   
> +static const struct i915_hdcp_ops gsc_hdcp_ops = {
> +	.initiate_hdcp2_session = intel_hdcp_gsc_initiate_session,
> +	.verify_receiver_cert_prepare_km =
> +				intel_hdcp_gsc_verify_receiver_cert_prepare_km,
> +	.verify_hprime = intel_hdcp_gsc_verify_hprime,
> +	.store_pairing_info = intel_hdcp_gsc_store_pairing_info,
> +	.initiate_locality_check = intel_hdcp_gsc_initiate_locality_check,
> +	.verify_lprime = intel_hdcp_gsc_verify_lprime,
> +	.get_session_key = intel_hdcp_gsc_get_session_key,
> +	.repeater_check_flow_prepare_ack =
> +				intel_hdcp_gsc_repeater_check_flow_prepare_ack,
> +	.verify_mprime = intel_hdcp_gsc_verify_mprime,
> +	.enable_hdcp_authentication = intel_hdcp_gsc_enable_authentication,
> +	.close_hdcp_session = intel_hdcp_gsc_close_session,
> +};
The changes to xe_hdcp_gsc seems like it should be part of the previous 
commit?

Presumably also useful to reorder the Makefile change to before 4/5.

Cheers,
Maarten


More information about the Intel-gfx mailing list