[PATCH 4/6] drm/i915/display: Compute and Enable AS SDP

[Nautiyal, Ankit K]

On 2/16/2024 7:50 PM, Mitul Golani wrote:
> Add necessary functions definitions to enable
> and compute AS SDP data. The new `intel_dp_compute_as_sdp`
> function computes AS SDP values based on the display
> configuration, ensuring proper handling of Variable Refresh
> Rate (VRR).
>
> --v2:
> - Add DP_SDP_ADAPTIVE_SYNC to infoframe_type_to_idx().[Ankit]
> - separate patch for intel_read/write_dp_sdp [Ankit].
> - _HSW_VIDEO_DIP_ASYNC_DATA_A should be from ADL onward [Ankit]
> - To fix indentation [Ankit]
>
> --v3:
> - Add VIDEO_DIP_ENABLE_AS_HSW flag to intel_dp_set_infoframes.
>
> --v4:
> - Add HAS_VRR check before write as sdp.
>
> --v5:
> - Add missed HAS_VRR check before read as sdp.
>
> --v6:
> Use Adaptive Sync sink status, which can be
> used as a check for read/write sdp. (Ankit)
>
> Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani at intel.com>
> ---
>   drivers/gpu/drm/i915/display/intel_dp.c | 20 ++++++++++++++++++++
>   1 file changed, 20 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index d68fb9d45054..0759266e7bfb 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2617,6 +2617,25 @@ static void intel_dp_compute_vsc_colorimetry(const struct intel_crtc_state *crtc
>   	vsc->content_type = DP_CONTENT_TYPE_NOT_DEFINED;
>   }
>   
> +static void intel_dp_compute_as_sdp(struct intel_dp *intel_dp,
> +				    struct intel_crtc_state *crtc_state,
> +				    const struct drm_connector_state *conn_state)
> +{
> +	struct drm_dp_as_sdp *as_sdp = &crtc_state->infoframes.as_sdp;
> +	struct intel_connector *connector = intel_dp->attached_connector;
> +	const struct drm_display_mode *adjusted_mode =
> +		&crtc_state->hw.adjusted_mode;
> +	int vrefresh = drm_mode_vrefresh(adjusted_mode);
> +
> +	if (!intel_vrr_is_in_range(connector, vrefresh))
> +		return;


I think there should be 2 variables in crtc_state->vrras_sdp_enable and 
as_sdp_mode.

as_sdp_enable to track, if we really need to send the as_sdp and the 
as_sdp_mode to track which mode we want (AVT/FAVT)


We fill these in vrr_compute_config, along with other members like trans 
vrr_sync_start/end.


Here we can check if as_sdp_enable is set, if not we return early.



> +
> +	crtc_state->infoframes.enable |= intel_hdmi_infoframe_enable(DP_SDP_ADAPTIVE_SYNC);
> +	as_sdp->sdp_type = DP_SDP_ADAPTIVE_SYNC;
> +	as_sdp->length = 0x9;
> +	as_sdp->vtotal = adjusted_mode->vtotal;

Here the as_sdp->operation_mode should be set which is computed in 
vrr_compute_config, as mentioned above.

Other fields will depend on mode that is selected.


Regards,

Ankit



> +}
> +
>   static void intel_dp_compute_vsc_sdp(struct intel_dp *intel_dp,
>   				     struct intel_crtc_state *crtc_state,
>   				     const struct drm_connector_state *conn_state)
> @@ -2942,6 +2961,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
>   		g4x_dp_set_clock(encoder, pipe_config);
>   
>   	intel_vrr_compute_config(pipe_config, conn_state);
> +	intel_dp_compute_as_sdp(intel_dp, pipe_config, conn_state);
>   	intel_psr_compute_config(intel_dp, pipe_config, conn_state);
>   	intel_dp_drrs_compute_config(connector, pipe_config, link_bpp_x16);
>   	intel_dp_compute_vsc_sdp(intel_dp, pipe_config, conn_state);