[PATCH 3/3] drm/i915: Fix bigjoiner case for DP2.0

Jani Nikula jani.nikula at linux.intel.com
Mon Feb 26 19:56:10 UTC 2024


On Wed, 21 Feb 2024, Stanislav Lisovskiy <stanislav.lisovskiy at intel.com> wrote:
> Patch calculates bigjoiner pipes in mst compute.
> Patch also passes bigjoiner bool to validate plane
> max size.

Please use the imperative mood in commit messages, e.g. "calculate"
intead of "calculates".

Please do not refer to "patch". We know it's a patch, until it isn't,
and then it's a commit.

Please explain *why* the changes are being done, not just *what* is
being done.

In the subject, what is "bigjoiner case for DP2.0"? DP 2.0 is a spec
version, and as such irrelevant for the changes being done.

> Signed-off-by: vsrini4 <vidya.srinivas at intel.com>

?

> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
> ---
>  drivers/gpu/drm/i915/display/intel_dp_mst.c | 19 ++++++++++++-------
>  1 file changed, 12 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp_mst.c b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> index 5307ddd4edcf5..fd27d9976c050 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp_mst.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp_mst.c
> @@ -523,6 +523,7 @@ static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
>  				       struct drm_connector_state *conn_state)
>  {
>  	struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> +	struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
>  	struct intel_dp_mst_encoder *intel_mst = enc_to_mst(encoder);
>  	struct intel_dp *intel_dp = &intel_mst->primary->dp;
>  	const struct intel_connector *connector =
> @@ -540,6 +541,10 @@ static int intel_dp_mst_compute_config(struct intel_encoder *encoder,
>  	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
>  		return -EINVAL;
>  
> +	if (intel_dp_need_bigjoiner(intel_dp, adjusted_mode->crtc_hdisplay,
> +				    adjusted_mode->crtc_clock))
> +		pipe_config->bigjoiner_pipes = GENMASK(crtc->pipe + 1, crtc->pipe);
> +
>  	pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB;
>  	pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
>  	pipe_config->has_pch_encoder = false;
> @@ -1318,12 +1323,6 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
>  	 *   corresponding link capabilities of the sink) in case the
>  	 *   stream is uncompressed for it by the last branch device.
>  	 */
> -	if (mode_rate > max_rate || mode->clock > max_dotclk ||
> -	    drm_dp_calc_pbn_mode(mode->clock, min_bpp << 4) > port->full_pbn) {
> -		*status = MODE_CLOCK_HIGH;
> -		return 0;
> -	}
> -
>  	if (mode->clock < 10000) {
>  		*status = MODE_CLOCK_LOW;
>  		return 0;
> @@ -1343,6 +1342,12 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
>  		return 0;
>  	}
>  
> +	if (mode_rate > max_rate || mode->clock > max_dotclk ||
> +	    drm_dp_calc_pbn_mode(mode->clock, min_bpp << 4) > port->full_pbn) {
> +		*status = MODE_CLOCK_HIGH;
> +		return 0;
> +	}
> +
>  	if (DISPLAY_VER(dev_priv) >= 10 &&
>  	    drm_dp_sink_supports_dsc(intel_connector->dp.dsc_dpcd)) {
>  		/*
> @@ -1385,7 +1390,7 @@ intel_dp_mst_mode_valid_ctx(struct drm_connector *connector,
>  		return 0;
>  	}
>  
> -	*status = intel_mode_valid_max_plane_size(dev_priv, mode, false);
> +	*status = intel_mode_valid_max_plane_size(dev_priv, mode, bigjoiner);
>  	return 0;
>  }

-- 
Jani Nikula, Intel


More information about the Intel-gfx mailing list