[PATCH 2/2] drm/i915/display: Call panel_fitting from pipe_config

[Nemesa Garg]

In panel fitter/pipe scaler scenario the pch_pfit configuration
currently takes place before accounting for pipe_src width for
joiner. This causes issue when pch_pfit and joiner gets
enabled together.

Introduce a new boolean flag is_required which can be filled
during dp compute_config and later is used to compute panel_fitting in
pipe_config. Modify pch_panel_fitting to handle joiner pipes by adjusting
crtc_hdisplay accordingly.

Signed-off-by: Nemesa Garg <nemesa.garg at intel.com>
---
 drivers/gpu/drm/i915/display/intel_display.c       | 11 +++++++++++
 drivers/gpu/drm/i915/display/intel_display_types.h |  1 +
 drivers/gpu/drm/i915/display/intel_dp.c            |  7 ++-----
 drivers/gpu/drm/i915/display/intel_panel.c         |  3 +++
 4 files changed, 17 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
index 8bbde03f2508..a7194a84b6b8 100644
--- a/drivers/gpu/drm/i915/display/intel_display.c
+++ b/drivers/gpu/drm/i915/display/intel_display.c
@@ -4796,6 +4796,17 @@ intel_modeset_pipe_config(struct intel_atomic_state *state,
 		return ret;
 	}
 
+	for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
+		if (connector_state->crtc != &crtc->base)
+			continue;
+
+		if (crtc_state->pch_pfit.is_required) {
+			ret = intel_panel_fitting(crtc_state, connector_state);
+			if (ret)
+				return ret;
+		}
+	}
+
 	/* Dithering seems to not pass-through bits correctly when it should, so
 	 * only enable it on 6bpc panels and when its not a compliance
 	 * test requesting 6bpc video pattern.
diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h
index a04d52dbf6e1..a4ab26d8fa43 100644
--- a/drivers/gpu/drm/i915/display/intel_display_types.h
+++ b/drivers/gpu/drm/i915/display/intel_display_types.h
@@ -1258,6 +1258,7 @@ struct intel_crtc_state {
 		struct drm_rect dst;
 		bool enabled;
 		bool force_thru;
+		bool is_required;
 	} pch_pfit;
 
 	/* FDI configuration, only valid if has_pch_encoder is set. */
diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
index d0d878da71ee..d892c5a429f1 100644
--- a/drivers/gpu/drm/i915/display/intel_dp.c
+++ b/drivers/gpu/drm/i915/display/intel_dp.c
@@ -2922,11 +2922,8 @@ intel_dp_compute_config(struct intel_encoder *encoder,
 		pipe_config->has_pch_encoder = true;
 
 	fixed_mode = intel_panel_fixed_mode(connector, adjusted_mode);
-	if (intel_dp_is_edp(intel_dp) && fixed_mode) {
-		ret = intel_panel_compute_config(connector, adjusted_mode);
-		if (ret)
-			return ret;
-	}
+	if (intel_dp_is_edp(intel_dp) && fixed_mode)
+		pipe_config->pch_pfit.is_required = true;
 
 	if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
 		return -EINVAL;
diff --git a/drivers/gpu/drm/i915/display/intel_panel.c b/drivers/gpu/drm/i915/display/intel_panel.c
index dd18136d1c61..0da45c2330d3 100644
--- a/drivers/gpu/drm/i915/display/intel_panel.c
+++ b/drivers/gpu/drm/i915/display/intel_panel.c
@@ -395,6 +395,9 @@ static int pch_panel_fitting(struct intel_crtc_state *crtc_state,
 	u16 crtc_hdisplay = adjusted_mode->crtc_hdisplay;
 	u16 crtc_vdisplay = adjusted_mode->crtc_vdisplay;
 
+	if (crtc_state->joiner_pipes)
+		crtc_hdisplay = adjusted_mode->crtc_hdisplay / 2;
+
 	/* Native modes don't need fitting */
 	if (crtc_hdisplay == pipe_src_w &&
 	    crtc_vdisplay == pipe_src_h &&
-- 
2.25.1