[PATCH v5 10/19] drm/i915/psr: enable sink for eDP1.5 Panel Replay
Jouni Högander
jouni.hogander at intel.com
Mon Jun 3 13:00:34 UTC 2024
eDP1.5 allows Panel Replay on eDP as well. Take this into account when
enabling sink PSR/Panel Replay. Write also PANEL_REPLAY_CONFIG2 register
accordingly.
v2: do not configure ALPM for DP2.0 Panel Replay
Signed-off-by: Jouni Högander <jouni.hogander at intel.com>
---
drivers/gpu/drm/i915/display/intel_psr.c | 67 ++++++++++++++++++------
1 file changed, 50 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c
index e347775610df..1c8ee5a4a9b8 100644
--- a/drivers/gpu/drm/i915/display/intel_psr.c
+++ b/drivers/gpu/drm/i915/display/intel_psr.c
@@ -690,6 +690,27 @@ static unsigned int intel_psr_get_enable_sink_offset(struct intel_dp *intel_dp)
PANEL_REPLAY_CONFIG : DP_PSR_EN_CFG;
}
+static void intel_psr_enable_sink_alpm(struct intel_dp *intel_dp,
+ const struct intel_crtc_state *crtc_state)
+{
+ u32 val;
+
+ /*
+ * eDP Panel Replay uses always ALPM
+ * PSR2 uses ALPM but PSR1 doesn't
+ */
+ if (!intel_dp_is_edp(intel_dp) || (!crtc_state->has_panel_replay &&
+ !crtc_state->has_sel_update))
+ return;
+
+ val = DP_ALPM_ENABLE | DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE;
+
+ if (crtc_state->has_panel_replay)
+ val |= DP_ALPM_MODE_AUX_LESS;
+
+ drm_dp_dpcd_writeb(&intel_dp->aux, DP_RECEIVER_ALPM_CONFIG, val);
+}
+
/*
* Note: Most of the bits are same in PANEL_REPLAY_CONFIG and DP_PSR_EN_CFG. We
* are relying on PSR definitions on these "common" bits.
@@ -698,42 +719,54 @@ void intel_psr_enable_sink(struct intel_dp *intel_dp,
const struct intel_crtc_state *crtc_state)
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
- u8 dpcd_val = DP_PSR_ENABLE;
+ u8 enable_val = DP_PSR_ENABLE;
+ u8 panel_replay_config2 = 0;
+
+ intel_psr_enable_sink_alpm(intel_dp, crtc_state);
if (crtc_state->has_sel_update) {
- /* Enable ALPM at sink for psr2 */
- if (!crtc_state->has_panel_replay) {
- drm_dp_dpcd_writeb(&intel_dp->aux,
- DP_RECEIVER_ALPM_CONFIG,
- DP_ALPM_ENABLE |
- DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE);
+ /* PSR2 and Panel Replay SU on eDP */
+ if (intel_dp_is_edp(intel_dp)) {
+ if (crtc_state->req_psr2_sdp_prior_scanline) {
+ if (crtc_state->has_panel_replay)
+ panel_replay_config2 |=
+ DP_PANEL_REPLAY_SU_REGION_SCANLINE_CAPTURE;
+ else
+ enable_val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE;
+ }
if (crtc_state->enable_psr2_su_region_et)
- dpcd_val |= DP_PSR_ENABLE_SU_REGION_ET;
+ enable_val |= DP_PSR_ENABLE_SU_REGION_ET;
}
- dpcd_val |= DP_PSR_ENABLE_PSR2 | DP_PSR_IRQ_HPD_WITH_CRC_ERRORS;
+ enable_val |= DP_PSR_ENABLE_PSR2 | DP_PSR_IRQ_HPD_WITH_CRC_ERRORS;
} else {
+ /* PSR2 and Panel Replay Full Frame Update */
if (intel_dp->psr.link_standby)
- dpcd_val |= DP_PSR_MAIN_LINK_ACTIVE;
+ enable_val |= DP_PSR_MAIN_LINK_ACTIVE;
if (!crtc_state->has_panel_replay && DISPLAY_VER(dev_priv) >= 8)
- dpcd_val |= DP_PSR_CRC_VERIFICATION;
+ enable_val |= DP_PSR_CRC_VERIFICATION;
}
- if (crtc_state->has_panel_replay)
- dpcd_val |= DP_PANEL_REPLAY_UNRECOVERABLE_ERROR_EN |
+ if (crtc_state->has_panel_replay) {
+ enable_val |= DP_PANEL_REPLAY_UNRECOVERABLE_ERROR_EN |
DP_PANEL_REPLAY_RFB_STORAGE_ERROR_EN;
- if (crtc_state->req_psr2_sdp_prior_scanline)
- dpcd_val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE;
+ if (intel_dp_is_edp(intel_dp))
+ enable_val |= DP_PANEL_REPLAY_VSC_SDP_CRC_EN;
+ }
if (intel_dp->psr.entry_setup_frames > 0)
- dpcd_val |= DP_PSR_FRAME_CAPTURE;
+ enable_val |= DP_PSR_FRAME_CAPTURE;
drm_dp_dpcd_writeb(&intel_dp->aux,
intel_psr_get_enable_sink_offset(intel_dp),
- dpcd_val);
+ enable_val);
+
+ if (crtc_state->has_panel_replay && intel_dp_is_edp(intel_dp))
+ drm_dp_dpcd_writeb(&intel_dp->aux, PANEL_REPLAY_CONFIG2,
+ panel_replay_config2);
if (intel_dp_is_edp(intel_dp))
drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
--
2.34.1
More information about the Intel-gfx
mailing list