[core-for-CI PATCH] Revert "e1000e: move force SMBUS near the end of enable_ulp function"
Chaitanya Kumar Borah
chaitanya.kumar.borah at intel.com
Mon Jun 10 07:46:27 UTC 2024
This reverts commit bfd546a552e140b0a4c8a21527c39d6d21addb28.
The commit seems to cause problems in suspend-resume tests
[212.204897] e1000e 0000:00:1f.6: PM: pci_pm_suspend(): e1000e_pm_suspend [e1000e] returns -2
[212.204928] e1000e 0000:00:1f.6: PM: dpm_run_callback(): pci_pm_suspend returns -2
[212.204943] e1000e 0000:00:1f.6: PM: failed to suspend async: error -2
[212.205092] PM: suspend of devices aborted after 302.254 msecs
References: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_14904/shard-dg2-4/igt@gem_ccs@suspend-resume@linear-compressed-compfmt0-lmem0-lmem0.html
References: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11305
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah at intel.com>
---
drivers/net/ethernet/intel/e1000e/ich8lan.c | 22 ---------------------
drivers/net/ethernet/intel/e1000e/netdev.c | 18 +++++++++++++++++
2 files changed, 18 insertions(+), 22 deletions(-)
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 2e98a2a0bead..f9e94be36e97 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -1225,28 +1225,6 @@ s32 e1000_enable_ulp_lpt_lp(struct e1000_hw *hw, bool to_sx)
}
release:
- /* Switching PHY interface always returns MDI error
- * so disable retry mechanism to avoid wasting time
- */
- e1000e_disable_phy_retry(hw);
-
- /* Force SMBus mode in PHY */
- ret_val = e1000_read_phy_reg_hv_locked(hw, CV_SMB_CTRL, &phy_reg);
- if (ret_val) {
- e1000e_enable_phy_retry(hw);
- hw->phy.ops.release(hw);
- goto out;
- }
- phy_reg |= CV_SMB_CTRL_FORCE_SMBUS;
- e1000_write_phy_reg_hv_locked(hw, CV_SMB_CTRL, phy_reg);
-
- e1000e_enable_phy_retry(hw);
-
- /* Force SMBus mode in MAC */
- mac_reg = er32(CTRL_EXT);
- mac_reg |= E1000_CTRL_EXT_FORCE_SMBUS;
- ew32(CTRL_EXT, mac_reg);
-
hw->phy.ops.release(hw);
out:
if (ret_val)
diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c
index da5c59daf8ba..220d62fca55d 100644
--- a/drivers/net/ethernet/intel/e1000e/netdev.c
+++ b/drivers/net/ethernet/intel/e1000e/netdev.c
@@ -6623,6 +6623,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
struct e1000_hw *hw = &adapter->hw;
u32 ctrl, ctrl_ext, rctl, status, wufc;
int retval = 0;
+ u16 smb_ctrl;
/* Runtime suspend should only enable wakeup for link changes */
if (runtime)
@@ -6696,6 +6697,23 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool runtime)
if (retval)
return retval;
}
+
+ /* Force SMBUS to allow WOL */
+ /* Switching PHY interface always returns MDI error
+ * so disable retry mechanism to avoid wasting time
+ */
+ e1000e_disable_phy_retry(hw);
+
+ e1e_rphy(hw, CV_SMB_CTRL, &smb_ctrl);
+ smb_ctrl |= CV_SMB_CTRL_FORCE_SMBUS;
+ e1e_wphy(hw, CV_SMB_CTRL, smb_ctrl);
+
+ e1000e_enable_phy_retry(hw);
+
+ /* Force SMBus mode in MAC */
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_FORCE_SMBUS;
+ ew32(CTRL_EXT, ctrl_ext);
}
/* Ensure that the appropriate bits are set in LPI_CTRL
--
2.25.1
More information about the Intel-gfx
mailing list