[PATCH v2 2/6] drm/i915/gvt: use proper i915_reg_t for calc_index() parameters

[Zhi Wang]

On Fri,  7 Jun 2024 18:25:36 +0300
Jani Nikula <jani.nikula at intel.com> wrote:

> In order to be able to use the proper register macros instead of the
> underscore prefixed ones, pass i915_reg_t for the calc_index()
> parameters.
> 
> Side note: DSPSURF is really about planes, not pipes. Fixed stride
> doesn't work for plane C for CHV (but that's okay for gvt). This
> doesn't support planes beyond C either. But all that is unrelated to
> the change at hand.
> 
> Cc: Zhenyu Wang <zhenyuw at linux.intel.com>
> Cc: Zhi Wang <zhi.wang.linux at gmail.com>
> Cc: intel-gvt-dev at lists.freedesktop.org
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
> ---
>  drivers/gpu/drm/i915/gvt/handlers.c | 18 ++++++++++--------
>  1 file changed, 10 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/gpu/drm/i915/gvt/handlers.c
> b/drivers/gpu/drm/i915/gvt/handlers.c index
> a2e9d24d646e..b005ab0104ee 100644 ---
> a/drivers/gpu/drm/i915/gvt/handlers.c +++
> b/drivers/gpu/drm/i915/gvt/handlers.c @@ -881,9 +881,11 @@ static int
> check_fdi_rx_train_status(struct intel_vgpu *vgpu, 
>  #define INVALID_INDEX (~0U)
>  
> -static unsigned int calc_index(unsigned int offset, unsigned int
> start,
> -			       unsigned int next, i915_reg_t _end)
> +static unsigned int calc_index(unsigned int offset, i915_reg_t
> _start,
> +			       i915_reg_t _next, i915_reg_t _end)
>  {
> +	u32 start = i915_mmio_reg_offset(_start);
> +	u32 next = i915_mmio_reg_offset(_next);
>  	u32 end = i915_mmio_reg_offset(_end);
>  	unsigned int range = next - start;
>  
> @@ -894,13 +896,13 @@ static unsigned int calc_index(unsigned int
> offset, unsigned int start, }
>  
>  #define FDI_RX_CTL_TO_PIPE(offset) \
> -	calc_index(offset, _FDI_RXA_CTL, _FDI_RXB_CTL,
> FDI_RX_CTL(PIPE_C))
> +	calc_index(offset, FDI_RX_CTL(PIPE_A), FDI_RX_CTL(PIPE_B),
> FDI_RX_CTL(PIPE_C)) 
>  #define FDI_TX_CTL_TO_PIPE(offset) \
> -	calc_index(offset, _FDI_TXA_CTL, _FDI_TXB_CTL,
> FDI_TX_CTL(PIPE_C))
> +	calc_index(offset, FDI_TX_CTL(PIPE_A), FDI_TX_CTL(PIPE_B),
> FDI_TX_CTL(PIPE_C)) 
>  #define FDI_RX_IMR_TO_PIPE(offset) \
> -	calc_index(offset, _FDI_RXA_IMR, _FDI_RXB_IMR,
> FDI_RX_IMR(PIPE_C))
> +	calc_index(offset, FDI_RX_IMR(PIPE_A), FDI_RX_IMR(PIPE_B),
> FDI_RX_IMR(PIPE_C)) 
>  static int update_fdi_rx_iir_status(struct intel_vgpu *vgpu,
>  		unsigned int offset, void *p_data, unsigned int
> bytes) @@ -944,7 +946,7 @@ static int update_fdi_rx_iir_status(struct
> intel_vgpu *vgpu, }
>  
>  #define DP_TP_CTL_TO_PORT(offset) \
> -	calc_index(offset, _DP_TP_CTL_A, _DP_TP_CTL_B,
> DP_TP_CTL(PORT_E))
> +	calc_index(offset, DP_TP_CTL(PORT_A), DP_TP_CTL(PORT_B),
> DP_TP_CTL(PORT_E)) 
>  static int dp_tp_ctl_mmio_write(struct intel_vgpu *vgpu, unsigned
> int offset, void *p_data, unsigned int bytes)
> @@ -1008,7 +1010,7 @@ static int south_chicken2_mmio_write(struct
> intel_vgpu *vgpu, }
>  
>  #define DSPSURF_TO_PIPE(offset) \
> -	calc_index(offset, _DSPASURF, _DSPBSURF, DSPSURF(dev_priv,
> PIPE_C))
> +	calc_index(offset, DSPSURF(dev_priv, PIPE_A),
> DSPSURF(dev_priv, PIPE_B), DSPSURF(dev_priv, PIPE_C)) 
>  static int pri_surf_mmio_write(struct intel_vgpu *vgpu, unsigned int
> offset, void *p_data, unsigned int bytes)
> @@ -1031,7 +1033,7 @@ static int pri_surf_mmio_write(struct
> intel_vgpu *vgpu, unsigned int offset, }
>  
>  #define SPRSURF_TO_PIPE(offset) \
> -	calc_index(offset, _SPRA_SURF, _SPRB_SURF, SPRSURF(PIPE_C))
> +	calc_index(offset, SPRSURF(PIPE_A), SPRSURF(PIPE_B),
> SPRSURF(PIPE_C)) 
>  static int spr_surf_mmio_write(struct intel_vgpu *vgpu, unsigned int
> offset, void *p_data, unsigned int bytes)

Reviwed-by: Zhi Wang <zhiwang at kernel.org>