[PATCH v2 2/2] drm/i915/dsc: don't mess up splitter state in joiner or dsc config
Ville Syrjälä
ville.syrjala at linux.intel.com
Fri Jun 14 11:47:38 UTC 2024
On Fri, Jun 14, 2024 at 01:16:04PM +0300, Jani Nikula wrote:
> The driver handles splitter (for MSO) and joiner/dsc configuration in
> different places. Avoid messing up the splitter hardware state when
> enabling/disabling joiner or dsc. It should not be possible to enable
> both joiner and splitter at the same time, but add more clarity to the
> register use overall.
>
> Note: We should probably handle splitter for MSO as well as dual-link
> DSI in intel_vdsc.c. Also, we have intel_uncompressed_joiner_enable()
> but no corresponding disable.
>
> Cc: Ville Syrjala <ville.syrjala at linux.intel.com>
> Signed-off-by: Jani Nikula <jani.nikula at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_ddi.c | 5 ++---
> drivers/gpu/drm/i915/display/intel_vdsc.c | 12 +++++++++---
> drivers/gpu/drm/i915/display/intel_vdsc_regs.h | 1 +
> 3 files changed, 12 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> index bb13a3ca8c7c..49509a6599fe 100644
> --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> @@ -2417,9 +2417,8 @@ static void intel_ddi_mso_configure(const struct intel_crtc_state *crtc_state)
> dss1 |= SPLITTER_CONFIGURATION_4_SEGMENT;
> }
>
> - intel_de_rmw(i915, ICL_PIPE_DSS_CTL1(pipe),
> - SPLITTER_ENABLE | SPLITTER_CONFIGURATION_MASK |
> - OVERLAP_PIXELS_MASK, dss1);
> + /* Only touch the splitter */
> + intel_de_rmw(i915, ICL_PIPE_DSS_CTL1(pipe), SPLITTER_STATE, dss1);
> }
>
> static u8 mtl_get_port_width(u8 lane_count)
> diff --git a/drivers/gpu/drm/i915/display/intel_vdsc.c b/drivers/gpu/drm/i915/display/intel_vdsc.c
> index b9687b7692b8..a8671d3f1d41 100644
> --- a/drivers/gpu/drm/i915/display/intel_vdsc.c
> +++ b/drivers/gpu/drm/i915/display/intel_vdsc.c
> @@ -766,7 +766,9 @@ void intel_uncompressed_joiner_enable(const struct intel_crtc_state *crtc_state)
> else
> dss_ctl1_val |= UNCOMPRESSED_JOINER_PRIMARY;
>
> - intel_de_write(dev_priv, dss_ctl1_reg(crtc, crtc_state->cpu_transcoder), dss_ctl1_val);
> + /* Avoid touching the splitter */
> + intel_de_rmw(dev_priv, dss_ctl1_reg(crtc, crtc_state->cpu_transcoder),
> + ~SPLITTER_STATE, dss_ctl1_val);
> }
> }
>
> @@ -793,7 +795,9 @@ void intel_dsc_enable(const struct intel_crtc_state *crtc_state)
> if (!intel_crtc_is_joiner_secondary(crtc_state))
> dss_ctl1_val |= PRIMARY_BIG_JOINER_ENABLE;
> }
> - intel_de_write(dev_priv, dss_ctl1_reg(crtc, crtc_state->cpu_transcoder), dss_ctl1_val);
> + /* Avoid touching the splitter */
> + intel_de_rmw(dev_priv, dss_ctl1_reg(crtc, crtc_state->cpu_transcoder),
> + ~SPLITTER_STATE, dss_ctl1_val);
> intel_de_write(dev_priv, dss_ctl2_reg(crtc, crtc_state->cpu_transcoder), dss_ctl2_val);
> }
>
> @@ -805,7 +809,9 @@ void intel_dsc_disable(const struct intel_crtc_state *old_crtc_state)
> /* Disable only if either of them is enabled */
> if (old_crtc_state->dsc.compression_enable ||
> old_crtc_state->joiner_pipes) {
> - intel_de_write(dev_priv, dss_ctl1_reg(crtc, old_crtc_state->cpu_transcoder), 0);
> + /* Avoid touching the splitter */
> + intel_de_rmw(dev_priv, dss_ctl1_reg(crtc, old_crtc_state->cpu_transcoder),
> + ~SPLITTER_STATE, 0);
> intel_de_write(dev_priv, dss_ctl2_reg(crtc, old_crtc_state->cpu_transcoder), 0);
> }
> }
> diff --git a/drivers/gpu/drm/i915/display/intel_vdsc_regs.h b/drivers/gpu/drm/i915/display/intel_vdsc_regs.h
> index f921ad67b587..3734cd96f55e 100644
> --- a/drivers/gpu/drm/i915/display/intel_vdsc_regs.h
> +++ b/drivers/gpu/drm/i915/display/intel_vdsc_regs.h
> @@ -37,6 +37,7 @@
> #define SPLITTER_CONFIGURATION_MASK REG_GENMASK(26, 25)
> #define SPLITTER_CONFIGURATION_2_SEGMENT REG_FIELD_PREP(SPLITTER_CONFIGURATION_MASK, 0)
> #define SPLITTER_CONFIGURATION_4_SEGMENT REG_FIELD_PREP(SPLITTER_CONFIGURATION_MASK, 1)
> +#define SPLITTER_STATE (SPLITTER_ENABLE | SPLITTER_CONFIGURATION_MASK | OVERLAP_PIXELS_MASK)
Not a big fan of this. I'd rather explicicitly list the bits
we actually want to modify in each call site.
Also not a big fan of the rmws. I think in the future we might be
able to adjust some DSC stuff via fastsets, and that means no rmws
because we then want to do it via DSB. But not sure if the DSS
registers specifically would be involved in that, and I guess we
already had some rmws in there so it'll require work anyway. So
no hard objection to using rmw for now.
> #define UNCOMPRESSED_JOINER_PRIMARY (1 << 21)
> #define UNCOMPRESSED_JOINER_SECONDARY (1 << 20)
>
> --
> 2.39.2
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list