[PATCH 2/3] Start separating pipe vs transcoder set logic for bigjoiner during modeset
Lisovskiy, Stanislav
stanislav.lisovskiy at intel.com
Fri Mar 1 10:27:18 UTC 2024
On Fri, Mar 01, 2024 at 12:10:52PM +0200, Ville Syrjälä wrote:
> On Wed, Feb 21, 2024 at 09:20:09PM +0200, Stanislav Lisovskiy wrote:
> > Handle only bigjoiner masters in skl_commit_modeset_enables/disables,
> > slave crtcs should be handled by master hooks. Same for encoders.
> > That way we can also remove a bunch of checks like intel_crtc_is_bigjoiner_slave.
> >
> > v2: Get rid of master vs slave checks and separation in crtc enable/disable hooks.
> > Use unified iteration cycle for all of those, while enabling/disabling
> > transcoder only for those pipes where its needed(Ville Syrjälä)
> >
> > v3: Move all the intel_encoder_* calls under transcoder code path(Ville Syrjälä)
> >
> > v4: - Call intel_crtc_vblank_on from hsw_crtc_enable only for non-transcoder path
> > (for master pipe that will be called from intel_encoders_enable/intel_enable_ddi)
> > - Fix stupid mistake with using crtc->pipe for the mask, instead of BIT(crtc->pipe)
> >
> > Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
> > ---
> > drivers/gpu/drm/i915/display/intel_ddi.c | 21 +--
> > drivers/gpu/drm/i915/display/intel_display.c | 183 ++++++++++++-------
> > drivers/gpu/drm/i915/display/intel_display.h | 6 +
> > 3 files changed, 121 insertions(+), 89 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c
> > index bea4415902044..6071e9f500871 100644
> > --- a/drivers/gpu/drm/i915/display/intel_ddi.c
> > +++ b/drivers/gpu/drm/i915/display/intel_ddi.c
> > @@ -3100,7 +3100,6 @@ static void intel_ddi_post_disable(struct intel_atomic_state *state,
> > const struct drm_connector_state *old_conn_state)
> > {
> > struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
> > - struct intel_crtc *slave_crtc;
> >
> > if (!intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_DP_MST)) {
> > intel_crtc_vblank_off(old_crtc_state);
> > @@ -3117,17 +3116,6 @@ static void intel_ddi_post_disable(struct intel_atomic_state *state,
> > ilk_pfit_disable(old_crtc_state);
> > }
>
> The master pipe stuff is right here ^ ...
>
> >
> > - for_each_intel_crtc_in_pipe_mask(&dev_priv->drm, slave_crtc,
> > - intel_crtc_bigjoiner_slave_pipes(old_crtc_state)) {
> > - const struct intel_crtc_state *old_slave_crtc_state =
> > - intel_atomic_get_old_crtc_state(state, slave_crtc);
> > -
> > - intel_crtc_vblank_off(old_slave_crtc_state);
> > -
> > - intel_dsc_disable(old_slave_crtc_state);
> > - skl_scaler_disable(old_slave_crtc_state);
> > - }
>
> .. but now you're moving the slave pipe stuff somewhere else?
>
> We should be just iterating the pipes here (assuming this
> is the correct spot to do these steps).
>
> > -
> > /*
> > * When called from DP MST code:
> > * - old_conn_state will be NULL
> > @@ -3363,8 +3351,7 @@ static void intel_enable_ddi(struct intel_atomic_state *state,
> > {
> > drm_WARN_ON(state->base.dev, crtc_state->has_pch_encoder);
> >
> > - if (!intel_crtc_is_bigjoiner_slave(crtc_state))
> > - intel_ddi_enable_transcoder_func(encoder, crtc_state);
> > + intel_ddi_enable_transcoder_func(encoder, crtc_state);
> >
> > /* Enable/Disable DP2.0 SDP split config before transcoder */
> > intel_audio_sdp_split_update(crtc_state);
> > @@ -3469,9 +3456,6 @@ void intel_ddi_update_active_dpll(struct intel_atomic_state *state,
> > struct intel_crtc *crtc)
> > {
> > struct drm_i915_private *i915 = to_i915(encoder->base.dev);
> > - struct intel_crtc_state *crtc_state =
> > - intel_atomic_get_new_crtc_state(state, crtc);
> > - struct intel_crtc *slave_crtc;
> > enum phy phy = intel_port_to_phy(i915, encoder->port);
> >
> > /* FIXME: Add MTL pll_mgr */
> > @@ -3479,9 +3463,6 @@ void intel_ddi_update_active_dpll(struct intel_atomic_state *state,
> > return;
> >
> > intel_update_active_dpll(state, crtc, encoder);
> > - for_each_intel_crtc_in_pipe_mask(&i915->drm, slave_crtc,
> > - intel_crtc_bigjoiner_slave_pipes(crtc_state))
> > - intel_update_active_dpll(state, slave_crtc, encoder);
> > }
> >
> > static void
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> > index 916c13a149fd5..e1ea53fd6a288 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.c
> > +++ b/drivers/gpu/drm/i915/display/intel_display.c
> > @@ -1631,31 +1631,12 @@ static void hsw_configure_cpu_transcoder(const struct intel_crtc_state *crtc_sta
> > hsw_set_transconf(crtc_state);
> > }
> >
> > -static void hsw_crtc_enable(struct intel_atomic_state *state,
> > - struct intel_crtc *crtc)
> > +static void hsw_crtc_enable_pre_transcoder(struct intel_atomic_state *state,
> > + struct intel_crtc *crtc)
> > {
> > const struct intel_crtc_state *new_crtc_state =
> > intel_atomic_get_new_crtc_state(state, crtc);
> > struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > - enum pipe pipe = crtc->pipe, hsw_workaround_pipe;
> > - enum transcoder cpu_transcoder = new_crtc_state->cpu_transcoder;
> > - bool psl_clkgate_wa;
> > -
> > - if (drm_WARN_ON(&dev_priv->drm, crtc->active))
> > - return;
> > -
> > - intel_dmc_enable_pipe(dev_priv, crtc->pipe);
> > -
> > - if (!new_crtc_state->bigjoiner_pipes) {
> > - intel_encoders_pre_pll_enable(state, crtc);
> > -
> > - if (new_crtc_state->shared_dpll)
> > - intel_enable_shared_dpll(new_crtc_state);
> > -
> > - intel_encoders_pre_enable(state, crtc);
> > - } else {
> > - icl_ddi_bigjoiner_pre_enable(state, new_crtc_state);
> > - }
> >
> > intel_dsc_enable(new_crtc_state);
> >
> > @@ -1665,19 +1646,17 @@ static void hsw_crtc_enable(struct intel_atomic_state *state,
> > intel_set_pipe_src_size(new_crtc_state);
> > if (DISPLAY_VER(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
> > bdw_set_pipe_misc(new_crtc_state);
> > +}
> >
> > - if (!intel_crtc_is_bigjoiner_slave(new_crtc_state) &&
> > - !transcoder_is_dsi(cpu_transcoder))
> > - hsw_configure_cpu_transcoder(new_crtc_state);
> > +static void hsw_crtc_enable_post_transcoder(struct intel_atomic_state *state,
> > + struct intel_crtc *crtc)
> > +{
> > + const struct intel_crtc_state *new_crtc_state =
> > + intel_atomic_get_new_crtc_state(state, crtc);
> > + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> >
> > crtc->active = true;
> >
> > - /* Display WA #1180: WaDisableScalarClockGating: glk */
> > - psl_clkgate_wa = DISPLAY_VER(dev_priv) == 10 &&
> > - new_crtc_state->pch_pfit.enabled;
> > - if (psl_clkgate_wa)
> > - glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, true);
> > -
> > if (DISPLAY_VER(dev_priv) >= 9)
> > skl_pfit_enable(new_crtc_state);
> > else
> > @@ -1700,27 +1679,84 @@ static void hsw_crtc_enable(struct intel_atomic_state *state,
> > icl_set_pipe_chicken(new_crtc_state);
> >
> > intel_initial_watermarks(state, crtc);
> > +}
> >
> > - if (intel_crtc_is_bigjoiner_slave(new_crtc_state))
> > - intel_crtc_vblank_on(new_crtc_state);
> > +static void hsw_crtc_enable(struct intel_atomic_state *state,
> > + struct intel_crtc *crtc)
> > +{
> > + const struct intel_crtc_state *new_crtc_state =
> > + intel_atomic_get_new_crtc_state(state, crtc);
> > + struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
> > + enum transcoder cpu_transcoder = new_crtc_state->cpu_transcoder;
> > + struct intel_crtc *_crtc;
> > + int slave_pipe_mask = intel_crtc_bigjoiner_slave_pipes(new_crtc_state);
> > + int pipe_mask = slave_pipe_mask | BIT(crtc->pipe);
> > + bool psl_clkgate_wa;
> > + enum pipe pipe = crtc->pipe, hsw_workaround_pipe;
> >
> > - intel_encoders_enable(state, crtc);
> > + if (drm_WARN_ON(&dev_priv->drm, crtc->active))
> > + return;
> >
> > - if (psl_clkgate_wa) {
> > - intel_crtc_wait_for_next_vblank(crtc);
> > - glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, false);
> > - }
> > + /*
> > + * Use reverse iterator to go through slave pipes first.
> > + * TODO: We might need smarter iterator here
> > + */
> > + for_each_intel_crtc_in_pipe_mask_reverse(&dev_priv->drm, _crtc,
> > + pipe_mask) {
> > + const struct intel_crtc_state *_new_crtc_state =
> > + intel_atomic_get_new_crtc_state(state, _crtc);
> > + bool needs_transcoder = ((slave_pipe_mask & BIT(_crtc->pipe)) == 0) &&
> > + !transcoder_is_dsi(cpu_transcoder);
> > +
> > + intel_dmc_enable_pipe(dev_priv, crtc->pipe);
> > +
> > + if (!new_crtc_state->bigjoiner_pipes) {
> > + if (needs_transcoder)
> > + intel_encoders_pre_pll_enable(state, crtc);
> > +
> > + if (new_crtc_state->shared_dpll)
> > + intel_enable_shared_dpll(new_crtc_state);
> > +
> > + if (needs_transcoder)
> > + intel_encoders_pre_enable(state, crtc);
> > + } else {
> > + icl_ddi_bigjoiner_pre_enable(state, new_crtc_state);
> > + }
>
> That mess needs to be eliminated entirely.
Yeah, was thinking about this too, was just a bit unsure how..
>
> > +
> > + hsw_crtc_enable_pre_transcoder(state, _crtc);
> > +
> > + if (needs_transcoder)
> > + hsw_configure_cpu_transcoder(_new_crtc_state);
>
> These transcoder things should not be within any pipe loop at all.
I didn't want to split the loop, which I would have to do otherwise,
but may be it makes sense, since transcoder path is needed only for master
pipe. However what if _hypothetically_ :) we would have more than one master
pipe?
>
> > +
> > + /* Display WA #1180: WaDisableScalarClockGating: glk */
> > + psl_clkgate_wa = DISPLAY_VER(dev_priv) == 10 &&
> > + new_crtc_state->pch_pfit.enabled;
> > + if (psl_clkgate_wa)
> > + glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, true);
> > +
> > + hsw_crtc_enable_post_transcoder(state, _crtc);
> > +
> > + if (needs_transcoder)
> > + intel_encoders_enable(state, crtc);
> > + else
> > + intel_crtc_vblank_on(_new_crtc_state);
> > +
> > + if (psl_clkgate_wa) {
> > + intel_crtc_wait_for_next_vblank(crtc);
> > + glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, false);
> > + }
> >
> > - /* If we change the relative order between pipe/planes enabling, we need
> > - * to change the workaround. */
> > - hsw_workaround_pipe = new_crtc_state->hsw_workaround_pipe;
> > - if (IS_HASWELL(dev_priv) && hsw_workaround_pipe != INVALID_PIPE) {
> > - struct intel_crtc *wa_crtc;
> > + /* If we change the relative order between pipe/planes enabling, we need
> > + * to change the workaround. */
> > + hsw_workaround_pipe = new_crtc_state->hsw_workaround_pipe;
> > + if (IS_HASWELL(dev_priv) && hsw_workaround_pipe != INVALID_PIPE) {
> > + struct intel_crtc *wa_crtc;
> >
> > - wa_crtc = intel_crtc_for_pipe(dev_priv, hsw_workaround_pipe);
> > + wa_crtc = intel_crtc_for_pipe(dev_priv, hsw_workaround_pipe);
> >
> > - intel_crtc_wait_for_next_vblank(wa_crtc);
> > - intel_crtc_wait_for_next_vblank(wa_crtc);
> > + intel_crtc_wait_for_next_vblank(wa_crtc);
> > + intel_crtc_wait_for_next_vblank(wa_crtc);
> > + }
> > }
> > }
> >
> > @@ -1784,28 +1820,27 @@ static void hsw_crtc_disable(struct intel_atomic_state *state,
> > const struct intel_crtc_state *old_crtc_state =
> > intel_atomic_get_old_crtc_state(state, crtc);
> > struct drm_i915_private *i915 = to_i915(crtc->base.dev);
> > + int slave_pipe_mask = intel_crtc_bigjoiner_slave_pipes(old_crtc_state);
> > + int pipe_mask = slave_pipe_mask | BIT(crtc->pipe);
> > + struct intel_crtc *_crtc;
> > +
> > + for_each_intel_crtc_in_pipe_mask(&i915->drm, _crtc,
> > + pipe_mask) {
> > + const struct intel_crtc_state *_old_crtc_state =
> > + intel_atomic_get_old_crtc_state(state, _crtc);
> > + bool needs_encoder_disable = (slave_pipe_mask & BIT(_crtc->pipe)) == 0;
> > +
> > + if (needs_encoder_disable) {
> > + intel_encoders_disable(state, _crtc);
> > + intel_encoders_post_disable(state, _crtc);
> > + }
> >
> > - /*
> > - * FIXME collapse everything to one hook.
> > - * Need care with mst->ddi interactions.
> > - */
> > - if (!intel_crtc_is_bigjoiner_slave(old_crtc_state)) {
> > - intel_encoders_disable(state, crtc);
> > - intel_encoders_post_disable(state, crtc);
> > - }
> > -
> > - intel_disable_shared_dpll(old_crtc_state);
> > -
> > - if (!intel_crtc_is_bigjoiner_slave(old_crtc_state)) {
> > - struct intel_crtc *slave_crtc;
> > -
> > - intel_encoders_post_pll_disable(state, crtc);
> > + intel_disable_shared_dpll(_old_crtc_state);
> >
> > - intel_dmc_disable_pipe(i915, crtc->pipe);
> > + if (needs_encoder_disable)
> > + intel_encoders_post_pll_disable(state, _crtc);
> >
> > - for_each_intel_crtc_in_pipe_mask(&i915->drm, slave_crtc,
> > - intel_crtc_bigjoiner_slave_pipes(old_crtc_state))
> > - intel_dmc_disable_pipe(i915, slave_crtc->pipe);
> > + intel_dmc_disable_pipe(i915, _crtc->pipe);
> > }
> > }
> >
> > @@ -6788,8 +6823,10 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state)
> > * Slave vblanks are masked till Master Vblanks.
> > */
> > if (!is_trans_port_sync_slave(old_crtc_state) &&
> > - !intel_dp_mst_is_slave_trans(old_crtc_state) &&
> > - !intel_crtc_is_bigjoiner_slave(old_crtc_state))
> > + !intel_dp_mst_is_slave_trans(old_crtc_state))
> > + continue;
> > +
> > + if (intel_crtc_is_bigjoiner_slave(old_crtc_state))
> > continue;
> >
> > intel_old_crtc_state_disables(state, old_crtc_state,
> > @@ -6807,6 +6844,9 @@ static void intel_commit_modeset_disables(struct intel_atomic_state *state)
> > if (!old_crtc_state->hw.active)
> > continue;
> >
> > + if (intel_crtc_is_bigjoiner_slave(old_crtc_state))
> > + continue;
> > +
> > intel_old_crtc_state_disables(state, old_crtc_state,
> > new_crtc_state, crtc);
> > }
> > @@ -6919,8 +6959,10 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
> > continue;
> >
> > if (intel_dp_mst_is_slave_trans(new_crtc_state) ||
> > - is_trans_port_sync_master(new_crtc_state) ||
> > - intel_crtc_is_bigjoiner_master(new_crtc_state))
> > + is_trans_port_sync_master(new_crtc_state))
> > + continue;
> > +
> > + if (intel_crtc_is_bigjoiner_slave(new_crtc_state))
> > continue;
> >
> > modeset_pipes &= ~BIT(pipe);
> > @@ -6930,7 +6972,7 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
> >
> > /*
> > * Then we enable all remaining pipes that depend on other
> > - * pipes: MST slaves and port sync masters, big joiner master
> > + * pipes: MST slaves and port sync masters
> > */
> > for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> > enum pipe pipe = crtc->pipe;
> > @@ -6938,6 +6980,9 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
> > if ((modeset_pipes & BIT(pipe)) == 0)
> > continue;
> >
> > + if (intel_crtc_is_bigjoiner_slave(new_crtc_state))
> > + continue;
> > +
> > modeset_pipes &= ~BIT(pipe);
>
> We are modesetting all the joined pipes here. The bitmask should reflect
> that.
Ohhh thanks for spotting. That might explain some issues we have atm.
>
> >
> > intel_enable_crtc(state, crtc);
> > diff --git a/drivers/gpu/drm/i915/display/intel_display.h b/drivers/gpu/drm/i915/display/intel_display.h
> > index f4a0773f0fca8..e1e8d956c305e 100644
> > --- a/drivers/gpu/drm/i915/display/intel_display.h
> > +++ b/drivers/gpu/drm/i915/display/intel_display.h
> > @@ -280,6 +280,12 @@ enum phy_fia {
> > base.head) \
> > for_each_if((pipe_mask) & BIT(intel_crtc->pipe))
> >
> > +#define for_each_intel_crtc_in_pipe_mask_reverse(dev, intel_crtc, pipe_mask) \
> > + list_for_each_entry_reverse(intel_crtc, \
> > + &(dev)->mode_config.crtc_list, \
> > + base.head) \
> > + for_each_if((pipe_mask) & BIT(intel_crtc->pipe))
> > +
> > #define for_each_intel_encoder(dev, intel_encoder) \
> > list_for_each_entry(intel_encoder, \
> > &(dev)->mode_config.encoder_list, \
> > --
> > 2.37.3
>
> --
> Ville Syrjälä
> Intel
More information about the Intel-gfx
mailing list