[PATCH v15 6/9] drm/i915/display: Compute AS SDP parameters
Nautiyal, Ankit K
ankit.k.nautiyal at intel.com
Mon Mar 4 10:12:49 UTC 2024
On 3/1/2024 2:15 PM, Mitul Golani wrote:
> Add necessary function definitions to compute AS SDP data.
> The new intel_dp_compute_as_sdp function computes AS SDP
> values based on the display configuration, ensuring proper
> handling of Variable Refresh Rate (VRR).
>
> --v2:
> - Added DP_SDP_ADAPTIVE_SYNC to infoframe_type_to_idx(). [Ankit]
> - Separated patch for intel_read/write_dp_sdp. [Ankit]
> - _HSW_VIDEO_DIP_ASYNC_DATA_A should be from ADL onward. [Ankit]
> - Fixed indentation issues. [Ankit]
>
> --v3:
> - Added VIDEO_DIP_ENABLE_AS_HSW flag to intel_dp_set_infoframes.
>
> --v4:
> - Added HAS_VRR check before writing AS SDP.
>
> --v5:
> Added missed HAS_VRR check before reading AS SDP.
>
> --v6:
> - Used Adaptive Sync sink status as a check for read/write SDP. (Ankit)
>
> --v7:
> - Remove as_sdp_enable from crtc_state.
> - Add a comment mentioning current support of
> DP_AS_SDP_AVT_FIXED_VTOTAL.
> - Add state checker for AS_SDP infoframe enable.
>
> --v8:
> - Drop conn_state from intel_dp_compute_as_sdp, as not used.
> - Remove fullstop in subject line.
>
> --v9:
> - Add vrr.enable instead of is_in_vrr_range.
>
> Signed-off-by: Mitul Golani <mitulkumar.ajitkumar.golani at intel.com>
> Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_dp.c | 26 +++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c
> index 1b3e7ae3dd76..ef1543205ee9 100644
> --- a/drivers/gpu/drm/i915/display/intel_dp.c
> +++ b/drivers/gpu/drm/i915/display/intel_dp.c
> @@ -2620,6 +2620,31 @@ static void intel_dp_compute_vsc_colorimetry(const struct intel_crtc_state *crtc
> vsc->content_type = DP_CONTENT_TYPE_NOT_DEFINED;
> }
>
> +static void intel_dp_compute_as_sdp(struct intel_dp *intel_dp,
> + struct intel_crtc_state *crtc_state)
> +{
> + struct drm_dp_as_sdp *as_sdp = &crtc_state->infoframes.as_sdp;
> + struct intel_connector *connector = intel_dp->attached_connector;
> + const struct drm_display_mode *adjusted_mode =
> + &crtc_state->hw.adjusted_mode;
> + int vrefresh = drm_mode_vrefresh(adjusted_mode);
I think you missed to remove vrefresh and connector, as they are no
longer required.
Regards,
Ankit
> +
> + if (!crtc_state->vrr.enable ||
> + !intel_dp_as_sdp_supported(intel_dp))
> + return;
> +
> + crtc_state->infoframes.enable |= intel_hdmi_infoframe_enable(DP_SDP_ADAPTIVE_SYNC);
> +
> + /* Currently only DP_AS_SDP_AVT_FIXED_VTOTAL mode supported */
> + as_sdp->sdp_type = DP_SDP_ADAPTIVE_SYNC;
> + as_sdp->length = 0x9;
> + as_sdp->mode = DP_AS_SDP_AVT_FIXED_VTOTAL;
> + as_sdp->vtotal = adjusted_mode->vtotal;
> + as_sdp->target_rr = 0;
> + as_sdp->duration_incr_ms = 0;
> + as_sdp->duration_incr_ms = 0;
> +}
> +
> static void intel_dp_compute_vsc_sdp(struct intel_dp *intel_dp,
> struct intel_crtc_state *crtc_state,
> const struct drm_connector_state *conn_state)
> @@ -2980,6 +3005,7 @@ intel_dp_compute_config(struct intel_encoder *encoder,
> g4x_dp_set_clock(encoder, pipe_config);
>
> intel_vrr_compute_config(pipe_config, conn_state);
> + intel_dp_compute_as_sdp(intel_dp, pipe_config);
> intel_psr_compute_config(intel_dp, pipe_config, conn_state);
> intel_dp_drrs_compute_config(connector, pipe_config, link_bpp_x16);
> intel_dp_compute_vsc_sdp(intel_dp, pipe_config, conn_state);
More information about the Intel-gfx
mailing list