[PATCH 2/2] drm/i915: Implement vblank synchronized MBUS join changes
Ville Syrjälä
ville.syrjala at linux.intel.com
Fri Mar 8 10:07:19 UTC 2024
On Wed, Feb 28, 2024 at 10:02:13AM +0200, Stanislav Lisovskiy wrote:
> Currently we can't change MBUS join status without doing a modeset,
> because we are lacking mechanism to synchronize those with vblank.
> However then this means that we can't do a fastset, if there is a need
> to change MBUS join state. Fix that by implementing such change.
> We already call correspondent check and update at pre_plane dbuf update,
> so the only thing left is to have a non-modeset version of that.
> If active pipes stay the same then fastset is possible and only MBUS
> join state/ddb allocation updates would be committed.
>
> v2: Implement additional changes according to BSpec.
> Vblank wait is needed after MBus/Dbuf programming in case if
> no modeset is done and we are switching from single to multiple
> displays, i.e mbus join state switches from "joined" to "non-joined"
> state. Otherwise vblank wait is not needed according to spec.
>
> v3: Split mbus and dbox programming into to pre/post plane update parts,
> how it should be done according to BSpec.
>
> v4: - Place "single display to multiple displays scenario" MBUS/DBOX programming
> after DDB reallocation, but before crtc enabling(that is where is has
> to be according to spec).
> - Check if crtc is still active, not only the old state.
> - Do a vblank wait if MBUX DBOX register was modified.
> - And of course do vblank wait only if crtc was active.
> - Do vblank wait only if we are not doing a modeset, if we are doing
> something before *commit_modeset_enables, because all crtcs might be
> disabled at this moment, so we will get WARN if try waiting for vblank
> then.
> - Still getting FIFO underrun so try waiting for vblank in pre_plane update
> as well.
> - Write also pipe that we need to sync with to MBUS_CTL register.
>
> v5: - Do vblank wait only for the first pipe, if mbus is joined
> - Check also if new/old_dbuf_state is not NULL, before getting single pipe
> and active pipes.
>
> Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy at intel.com>
> ---
> drivers/gpu/drm/i915/display/intel_display.c | 13 ++-
> drivers/gpu/drm/i915/display/skl_watermark.c | 104 +++++++++++++++----
> drivers/gpu/drm/i915/display/skl_watermark.h | 1 +
> 3 files changed, 96 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_display.c b/drivers/gpu/drm/i915/display/intel_display.c
> index 00ac65a140298..989818f5d342f 100644
> --- a/drivers/gpu/drm/i915/display/intel_display.c
> +++ b/drivers/gpu/drm/i915/display/intel_display.c
> @@ -6906,6 +6906,17 @@ static void skl_commit_modeset_enables(struct intel_atomic_state *state)
> }
> }
>
> + /*
> + * Some MBUS/DBuf update scenarios(mbus join disable) require that
> + * changes are done _after_ DDB reallocation, but _before_ crtc enabling.
> + * Typically we are disabling resources in post_plane/crtc_enable hooks,
> + * however in that case BSpec explicitly states that this should be done
> + * before we enable additional displays.
> + * FIXME: Should we still call this also there(post_plane hook)
> + * for extra-safety? If so, how to make sure, we don't call it twice?
> + */
> + intel_dbuf_mbus_post_ddb_update(state);
> +
> update_pipes = modeset_pipes;
>
> /*
> @@ -7148,9 +7159,7 @@ static void intel_atomic_commit_tail(struct intel_atomic_state *state)
> }
>
> intel_encoders_update_prepare(state);
> -
> intel_dbuf_pre_plane_update(state);
> - intel_mbus_dbox_update(state);
>
> for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> if (new_crtc_state->do_async_flip)
> diff --git a/drivers/gpu/drm/i915/display/skl_watermark.c b/drivers/gpu/drm/i915/display/skl_watermark.c
> index 606b7ba9db9ce..f0604ede399f7 100644
> --- a/drivers/gpu/drm/i915/display/skl_watermark.c
> +++ b/drivers/gpu/drm/i915/display/skl_watermark.c
> @@ -2628,13 +2628,6 @@ skl_compute_ddb(struct intel_atomic_state *state)
> if (ret)
> return ret;
>
> - if (old_dbuf_state->joined_mbus != new_dbuf_state->joined_mbus) {
> - /* TODO: Implement vblank synchronized MBUS joining changes */
> - ret = intel_modeset_all_pipes_late(state, "MBUS joining change");
> - if (ret)
> - return ret;
> - }
> -
> drm_dbg_kms(&i915->drm,
> "Enabled dbuf slices 0x%x -> 0x%x (total dbuf slices 0x%x), mbus joined? %s->%s\n",
> old_dbuf_state->enabled_slices,
> @@ -3539,8 +3532,9 @@ static void intel_dbuf_mbus_update(struct intel_atomic_state *state)
> struct drm_i915_private *i915 = to_i915(state->base.dev);
> u32 mbus_ctl, dbuf_min_tracker_val;
> enum dbuf_slice slice;
> - const struct intel_dbuf_state *dbuf_state =
> + const struct intel_dbuf_state *new_dbuf_state =
> intel_atomic_get_new_dbuf_state(state);
> + enum pipe pipe = ffs(new_dbuf_state->active_pipes) - 1;
That pipe might not even be enabled at this point.
>
> if (!HAS_MBUS_JOINING(i915))
> return;
> @@ -3549,13 +3543,13 @@ static void intel_dbuf_mbus_update(struct intel_atomic_state *state)
> * TODO: Implement vblank synchronized MBUS joining changes.
> * Must be properly coordinated with dbuf reprogramming.
> */
> - if (dbuf_state->joined_mbus) {
> + if (new_dbuf_state->joined_mbus) {
> mbus_ctl = MBUS_HASHING_MODE_1x4 | MBUS_JOIN |
> - MBUS_JOIN_PIPE_SELECT_NONE;
> + MBUS_JOIN_PIPE_SELECT(pipe);
> dbuf_min_tracker_val = DBUF_MIN_TRACKER_STATE_SERVICE(3);
> } else {
> mbus_ctl = MBUS_HASHING_MODE_2x2 |
> - MBUS_JOIN_PIPE_SELECT_NONE;
> + MBUS_JOIN_PIPE_SELECT(pipe);
> dbuf_min_tracker_val = DBUF_MIN_TRACKER_STATE_SERVICE(1);
> }
>
> @@ -3576,21 +3570,35 @@ void intel_dbuf_pre_plane_update(struct intel_atomic_state *state)
> intel_atomic_get_new_dbuf_state(state);
> const struct intel_dbuf_state *old_dbuf_state =
> intel_atomic_get_old_dbuf_state(state);
> + int new_num_active_pipes = 0;
> + int old_num_active_pipes = 0;
>
> if (!new_dbuf_state ||
> (new_dbuf_state->enabled_slices == old_dbuf_state->enabled_slices &&
> new_dbuf_state->joined_mbus == old_dbuf_state->joined_mbus))
> return;
>
> + new_num_active_pipes = hweight8(new_dbuf_state->active_pipes);
> +
> + if (old_dbuf_state)
> + old_num_active_pipes = hweight8(old_dbuf_state->active_pipes);
> +
> WARN_ON(!new_dbuf_state->base.changed);
>
> - if ((hweight8(new_dbuf_state->active_pipes) <= hweight8(old_dbuf_state->active_pipes))
> - || (old_dbuf_state->active_pipes == 0))
> + /*
> + * Switching from multiple to single display scenario(enable mbus join).
> + * Also we put here "<=" instead of "<" for suboptimal cases, when
> + * we switch from single => single display, enabling mbus join.
> + */
> + if (new_num_active_pipes <= old_num_active_pipes)
> intel_dbuf_mbus_update(state);
>
> gen9_dbuf_slices_update(i915,
> old_dbuf_state->enabled_slices |
> new_dbuf_state->enabled_slices);
> +
> + if (new_num_active_pipes <= old_num_active_pipes)
> + intel_mbus_dbox_update(state);
> }
>
> void intel_dbuf_post_plane_update(struct intel_atomic_state *state)
> @@ -3608,13 +3616,59 @@ void intel_dbuf_post_plane_update(struct intel_atomic_state *state)
>
> WARN_ON(!new_dbuf_state->base.changed);
>
> - if (hweight8(new_dbuf_state->active_pipes) > hweight8(old_dbuf_state->active_pipes))
> - intel_dbuf_mbus_update(state);
> -
> gen9_dbuf_slices_update(i915,
> new_dbuf_state->enabled_slices);
> }
>
> +void intel_dbuf_mbus_post_ddb_update(struct intel_atomic_state *state)
> +{
> + const struct intel_dbuf_state *new_dbuf_state =
> + intel_atomic_get_new_dbuf_state(state);
> + const struct intel_dbuf_state *old_dbuf_state =
> + intel_atomic_get_old_dbuf_state(state);
> + enum pipe pipe;
> + int new_num_active_pipes = 0;
> + int old_num_active_pipes = 0;
> +
> + if (!new_dbuf_state ||
> + (new_dbuf_state->enabled_slices == old_dbuf_state->enabled_slices &&
> + new_dbuf_state->joined_mbus == old_dbuf_state->joined_mbus))
> + return;
> +
> + pipe = ffs(new_dbuf_state->active_pipes) - 1;
> + new_num_active_pipes = hweight8(new_dbuf_state->active_pipes);
> +
> + if (old_dbuf_state)
> + old_num_active_pipes = hweight8(old_dbuf_state->active_pipes);
> +
> + WARN_ON(!new_dbuf_state->base.changed);
> +
> + /*
> + * Switching from single to multiple display scenario
> + */
> + if (new_num_active_pipes > old_num_active_pipes) {
> + struct intel_crtc *crtc;
> + struct intel_crtc_state *new_crtc_state;
> + int i;
> + intel_dbuf_mbus_update(state);
> + intel_mbus_dbox_update(state);
> +
> + if (state->modeset)
> + return;
> +
> + for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> + /*
> + * According to BSpec we should wait vblank on single display,
> + * before enabling additional displays
> + */
> + if (!new_crtc_state->hw.active || (crtc->pipe != pipe))
> + continue;
> +
> + intel_crtc_wait_for_next_vblank(crtc);
We should only need this when disabling mbus joining.
> + }
> + }
> +}
> +
> static bool xelpdp_is_only_pipe_per_dbuf_bank(enum pipe pipe, u8 active_pipes)
> {
> switch (pipe) {
> @@ -3638,8 +3692,8 @@ void intel_mbus_dbox_update(struct intel_atomic_state *state)
> {
> struct drm_i915_private *i915 = to_i915(state->base.dev);
> const struct intel_dbuf_state *new_dbuf_state, *old_dbuf_state;
> - const struct intel_crtc_state *new_crtc_state;
> - const struct intel_crtc *crtc;
> + const struct intel_crtc_state *new_crtc_state, *old_crtc_state;
> + struct intel_crtc *crtc;
> u32 val = 0;
> int i;
>
> @@ -3685,12 +3739,14 @@ void intel_mbus_dbox_update(struct intel_atomic_state *state)
> val |= MBUS_DBOX_B_CREDIT(8);
> }
>
> - for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
> - u32 pipe_val = val;
> + for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
> + u32 pipe_val = val, old_pipe_val;
>
> if (!new_crtc_state->hw.active)
> continue;
>
> + old_pipe_val = intel_de_read(i915, PIPE_MBUS_DBOX_CTL(crtc->pipe));
> +
> if (DISPLAY_VER(i915) >= 14) {
> if (xelpdp_is_only_pipe_per_dbuf_bank(crtc->pipe,
> new_dbuf_state->active_pipes))
> @@ -3700,6 +3756,14 @@ void intel_mbus_dbox_update(struct intel_atomic_state *state)
> }
>
> intel_de_write(i915, PIPE_MBUS_DBOX_CTL(crtc->pipe), pipe_val);
> +
> + /*
> + * BSpec instructs us to wait for vblank, if credits were changed.
> + * However we need to do that here only if crtc was active prior to change.
> + */
Supposedly only needed when changing B credits, which we never do.
If this is actually needed for other types of credits as well, then
we're going to have to do things more carefully than this because
the order in which the credits are increased vs. decreased actually
matters.
> + if (old_pipe_val != pipe_val &&
> + old_crtc_state->hw.active && !state->modeset)
> + intel_crtc_wait_for_next_vblank(crtc);
> }
> }
The patch is pretty hard to follow. And I think in
general that is because in the current code all the
functions are doing way too many things. It's really
hard to sequence anything correctly.
I think we really need to chunk things up into more sensible pieces. Eg:
mbus_dbox_ctl() -> calculate per-pipe PIPE_MBUS_DBOX_CTL value
update_mbus_dbox() -> write PIPE_MBUS_DBOX_CTL, perhaps looping over all the pipes
update_dbuf_min_tracker() -> update DBUF_CTL_S min tracker stuff
mbus_update_pipe() -> determine the pipe for MBUS_CTL update
update_mbus_ctl() -> write MBUS_CTL
And then at the high level we should be able to just have something
like:
intel_mbus_pre_ddb_update() {
if (!enabling_mbus_joining)
return;
pipe = mbus_update_pipe(new_dbuf_state)
if (pipe != INVALID)
return;
update_mbus_ctl(pipe)
update_mbus_dbox()
update_dbuf_min_tracker()
}
intel_mbus_post_ddb_update() {
if (disabling_mbus_joining)
pipe = mbus_update_pipe(old_dbuf_state);
else
pipe = INVALID
update_dbuf_min_tracker();
update_mbus_dbox();
update_mbus_ctl(pipe);
if (pipe != INVALID)
wait_for_vblank(pipe);
}
Another dodgy thing I noticed is that active_pipes now affects
PIPE_MBUS_DBOX_CTL BW credits on MTL+, but we're not taking that
into account when calculating the state. So we don't necessarily
serialize, nor do we necessarily add all the active crtcs into
the state AFAICS, so we might not program PIPE_MBUS_DBOX_CTL for
all pipes that need it. That could perhaps be fixed by the propsed
update_mbus_dbox() just looping over all active pipes (based on
dbuf_state->active_pipes), and not depend on having the crtcs in
the state.
I suppose another option would be to precompute the
PIPE_MBUS_DBOX_CTL values and serialize/etc. based on those
changing.
Although the final solution for that is going to depend on
whether we need to carefully sequence the non-B credit updates
across multiple pipes or not.
>
> diff --git a/drivers/gpu/drm/i915/display/skl_watermark.h b/drivers/gpu/drm/i915/display/skl_watermark.h
> index e3d1d74a7b170..5a97556a68c2c 100644
> --- a/drivers/gpu/drm/i915/display/skl_watermark.h
> +++ b/drivers/gpu/drm/i915/display/skl_watermark.h
> @@ -73,6 +73,7 @@ intel_atomic_get_dbuf_state(struct intel_atomic_state *state);
> int intel_dbuf_init(struct drm_i915_private *i915);
> void intel_dbuf_pre_plane_update(struct intel_atomic_state *state);
> void intel_dbuf_post_plane_update(struct intel_atomic_state *state);
> +void intel_dbuf_mbus_post_ddb_update(struct intel_atomic_state *state);
> void intel_mbus_dbox_update(struct intel_atomic_state *state);
>
> #endif /* __SKL_WATERMARK_H__ */
> --
> 2.37.3
--
Ville Syrjälä
Intel
More information about the Intel-gfx
mailing list